{"title":"Drone Parts","description":"\u003cp\u003eBuild your own drone. Browse the essentials — \u003cstrong\u003ebrushless motors, ESCs, propellers, frames, and flight controllers\u003c\/strong\u003e — for multirotor and FPV builds.\u003c\/p\u003e\u003cp\u003eQuality components matched for DIY drone projects, in stock and ready to ship fast across India with Cash on Delivery and a GST invoice. Ideal for hobbyists, students, and aerial-robotics projects.\u003c\/p\u003e","products":[{"product_id":"litewing-drone-positioning-module-optical-flow-tof-height-hold","title":"LiteWing Drone Positioning Module | Optical Flow \u0026 ToF Height Hold","description":"\u003ch1\u003eLiteWing Drone Positioning Module — Optical Flow \u0026amp; ToF Height Hold\u003c\/h1\u003e\n\u003cp\u003eThe LiteWing Drone Positioning Module integrates an optical flow sensor and a Time-of-Flight (ToF) range finder. It delivers real-time horizontal movement data and precise distance-to-ground measurements, enabling stable altitude and position hold on custom drones. This module is essential for indoor navigation and autonomous flight projects where GPS is unavailable.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor Type\u003c\/td\u003e\n\u003ctd\u003eOptical Flow + ToF (VL53L1X-based)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e3.3V – 5V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCurrent Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 100 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eToF Range\u003c\/td\u003e\n\u003ctd\u003e4 cm – 4 m (indoor, good lighting)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eI2C \/ UART (selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25 × 15 × 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndoor hovering drone with stable altitude and position lock\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/arduino-obstacle-avoidance-robot-kit-build-and-code-autonomous-car\"\u003eAutonomous delivery robot using floor tracking and obstacle avoidance\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/gesture-controlled-robotic-hand-kit-with-flex-sensors-and-arduino-nano\"\u003eGesture-controlled drone that follows hand movements precisely\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003eLow-altitude survey drone for accurate mapping without GPS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe module works with flight controllers running ArduPilot (via I2C), PX4, and Betaflight (with custom firmware). It supports 3.3V and 5V logic levels, making it compatible with Pixhawk, Omnibus, and Matek boards. For best results, pair with a vibration-damped mount.\u003c\/p\u003e\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect VCC to a clean 3.3V or 5V output on your flight controller. Wire SDA\/SCL for I2C mode, or TX\/RX for UART. Ensure a solid common ground. Add a 100 µF capacitor near the module to suppress voltage spikes from motor ESCs.\u003c\/p\u003e\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Pixhawk?\u003c\/summary\u003e\u003cp\u003eYes, connect via I2C to the Pixhawk's I2C port and set the sensor type in Mission Planner. It works with ArduPilot 4.0+.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it be used outdoors?\u003c\/summary\u003e\u003cp\u003eOptical flow requires visible ground texture; it works up to ~4 m in daylight, but strong sunlight may reduce ToF accuracy. Best for indoor or low-altitude outdoor flights.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it include mounting hardware?\u003c\/summary\u003e\u003cp\u003eThe module comes with a 4-pin header; you may need screws or vibration dampers for secure mounting (not included).\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53444952523117,"sku":"CDN-0196","price":2470.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_5aebee12-a44f-493e-9cfa-8f4508b5988c.jpg?v=1781512282"},{"product_id":"mpu9250-9-axis-attitude-gyro-accelerometer-sensor-module","title":"MPU9250 9-Axis Attitude Gyro Accelerometer Sensor Module","description":"\u003ch1\u003eMPU9250 9-Axis Attitude Gyro Accelerometer Sensor Module\u003c\/h1\u003e\n\n\u003cp\u003eThe MPU9250 is a 9-axis motion tracking module combining a 3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer. It provides precise attitude and heading data for applications requiring orientation sensing, such as drones, robotics, and wearable devices. Its integrated Digital Motion Processor (DMP) offloads complex calculations from the host microcontroller.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eChipset\u003c\/td\u003e\n\u003ctd\u003eTDK MPU9250\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor Axes\u003c\/td\u003e\n\u003ctd\u003e9 (3 gyro, 3 accel, 3 magnetometer)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCommunication Interface\u003c\/td\u003e\n\u003ctd\u003eI2C (up to 400kHz) \/ SPI (up to 1MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e2.4V to 3.6V (module includes 3.3V regulator)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGyroscope Range\u003c\/td\u003e\n\u003ctd\u003e±250, ±500, ±1000, ±2000°\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAccelerometer Range\u003c\/td\u003e\n\u003ctd\u003e±2, ±4, ±8, ±16 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMagnetometer Range\u003c\/td\u003e\n\u003ctd\u003e±4800 µT\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25.5mm x 15.2mm (approx.)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAutonomous drone flight controller with stabilization\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-self-balancing-robot\"\u003eSelf-balancing robot or segway-style platform\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-6dof-motion-capture-glove\"\u003eMotion capture glove for gesture-controlled interfaces\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003eCamera gimbal with real-time tilt and pan compensation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe MPU9250 works with any microcontroller supporting I2C or SPI, including Arduino Uno, Nano, Mega, ESP32, and Raspberry Pi. Its I2C address defaults to 0x68 (or 0x69 if AD0 is pulled high). The module runs at 3.3V logic but the on-board regulator allows powering from 5V pins; use level shifters if the host uses 5V logic to avoid damage.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eFor I2C connections, wire VCC to 3.3V (or 5V if using regulator), GND to ground, SCL to the controller's I2C clock, and SDA to data. I2C lines require 4.7kΩ pull-up resistors if not present on the module. To change the I2C address, connect AD0 to logic high. In SPI mode, connect NCS, SCL, SDA, and AD0\/SDO lines accordingly.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino Uno?\u003c\/summary\u003e\u003cp\u003eYes, the MPU9250 module works with Arduino Uno using I2C. Connect SCL to A5 and SDA to A4. Use the popular 'MPU9250' library by hideakitai or SparkFun's library for easy interfacing.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it come with headers soldered?\u003c\/summary\u003e\u003cp\u003eNo, the module is shipped with unsoldered header pins. Soldering is required to attach it to a breadboard or connect wires.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use the magnetometer indoors for accurate heading?\u003c\/summary\u003e\u003cp\u003eThe magnetometer can provide heading data indoors, but accuracy depends on calibration to account for hard and soft iron distortions. Use magnetometer calibration routines in your code for reliable results.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53444992008557,"sku":"CDN-0584","price":410.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_38665d9e-937b-451b-9941-60e96ab957c6.jpg?v=1781512691"},{"product_id":"rs2205-2300kv-brushless-motor-for-drones-ccw-compoden","title":"RS2205 2300KV Brushless Motor for Drones (CCW) | Compoden","description":"\u003ch1\u003eRS2205 2300KV Brushless High Speed Motor for Drone (CCW)\u003c\/h1\u003e\n\n\u003cp\u003eThe RS2205 2300KV brushless motor is designed for 5-inch propeller FPV drones and multirotors. This CCW (counter-clockwise) threaded version pairs with a CW counterpart for balanced thrust. With a 2300KV rating, it delivers high RPM on 3S–4S LiPo batteries, making it suitable for racing and freestyle builds.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStator Size\u003c\/td\u003e\n\u003ctd\u003e2205 (22mm diameter, 5mm height)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating\u003c\/td\u003e\n\u003ctd\u003e2300 RPM\/V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~25g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Thrust\u003c\/td\u003e\n\u003ctd\u003e900g (4S, 5045 prop)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e2S–4S LiPo (7.4V–14.8V)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePropeller Shaft\u003c\/td\u003e\n\u003ctd\u003eM5 thread, CCW\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e5-inch FPV racing quadcopter\u003c\/li\u003e\n  \u003cli\u003eFreestyle drone with GoPro mount\u003c\/li\u003e\n  \u003cli\u003eLightweight cinewhoop with ducted props\u003c\/li\u003e\n  \u003cli\u003eHigh-speed RC airplane (tractor configuration)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eWorks with standard 20A–30A BLHeli_S or BLHeli_32 ESCs. Pairs with 4-in-1 ESC boards and flight controllers like BetaFPV F4 or Kakute F7. Mounting pattern is 16x16mm or 19x19mm (M3 screws). Use with 5x4.5 bullnose or 5x4.3 tri‑blade props.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSolder the three motor wires to the ESC pads in any order; swap any two wires to reverse spin direction. Ensure joints are clean and insulated. Use 14AWG silicone wire for high‑current 4S setups. No pull‑ups needed.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We’ve spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3–5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino?\u003c\/summary\u003e\u003cp\u003eNo direct connection — you need a brushless ESC that accepts a PWM signal, which any Arduino can generate on its digital pins. Power the ESC separately.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat propellers fit this motor?\u003c\/summary\u003e\u003cp\u003eStandard 5‑inch props with a 5mm shaft hole, such as 5045 bullnose, 5043 tri‑blade, or 5×4.5×3. Ensure the propeller nut matches the CCW thread.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it include mounting screws?\u003c\/summary\u003e\u003cp\u003eYes, M3×6mm hex screws are included for mounting to a frame. Verify your frame’s motor mount pattern accepts 16×16mm or 19×19mm spacing.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445029691757,"sku":"CDN-0801","price":780.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_80ad0cbf-0b1d-42de-aef5-f451c271032a.jpg?v=1781512954"},{"product_id":"litewing-optical-flow-tof-sensor-for-drone-height-hold","title":"LiteWing Optical Flow \u0026 ToF Sensor for Drone Height Hold","description":"\u003ch1\u003eLiteWing Drone Positioning Module – Optical Flow \u0026amp; ToF Sensor for Height Hold \u0026amp; Position Hold\u003c\/h1\u003e\n\n\u003cp\u003eThe LiteWing Drone Positioning Module integrates optical flow and Time-of-Flight (ToF) sensors to provide precise altitude and position hold for multirotor drones. It works with popular flight controllers like Pixhawk and Arduino-based systems. Ideal for autonomous hovering, indoor navigation, and stable aerial photography.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor Type\u003c\/td\u003e\n\u003ctd\u003eOptical Flow \u0026amp; ToF\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eUART (3.3V TTL)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e4.5V–5.5V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCurrent Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;100mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eToF Range\u003c\/td\u003e\n\u003ctd\u003e0.1m–2m (indoors)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e28mm x 28mm x 7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIndoor drone with autonomous position and height hold\u003c\/li\u003e\n  \u003cli\u003ePrecision landing system for UAVs\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-autonomous-drone-obstacle-avoidance\"\u003eObstacle avoidance drone using ToF distance sensing\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003eAutomated warehouse inventory drone with optical flow navigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis module interfaces via UART and is compatible with Pixhawk, APM, Arduino, and Raspberry Pi boards. It works at 3.3V logic level but can tolerate 5V input with a simple level shifter. Pair it with a GPS module for robust outdoor position hold.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect VCC to 5V, GND to ground, TX to flight controller RX, and RX to flight controller TX. Ensure the sensor has a clear downward-facing view. Use a logic level converter if your controller operates at 5V to avoid damage.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Pixhawk 4?\u003c\/summary\u003e\u003cp\u003eYes, connect to a free TELEM or SERIAL port and set the appropriate protocol in Mission Planner (e.g., LIDAR-Lite) for height hold.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it be used outdoors?\u003c\/summary\u003e\u003cp\u003eOptical flow requires textured surfaces and good lighting; it works best indoors. For outdoor use, combine with GPS for enhanced stability.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the maximum altitude for height hold?\u003c\/summary\u003e\u003cp\u003eThe ToF sensor measures distances up to 2 meters accurately, ideal for terrain following and low-altitude holds.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445030019437,"sku":"CDN-0804","price":2470.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_b916db65-1768-4da3-b19e-6e912ce3a2a6.jpg?v=1781512955"},{"product_id":"apm-28-flight-controller-board-with-built-in-compass-drone-uav","title":"APM 2.8 Flight Controller Board with Built-in Compass | Drone UAV","description":"\u003ch1\u003eAPM 2.8 Flight Controller Board with Built-in Compass for Drones and UAVs\u003c\/h1\u003e\u003cp\u003eThe APM 2.8 is a versatile open-source flight controller board designed for multirotor drones, quadcopters, and UAVs. It features an integrated compass (magnetometer), MPU-6000 6-axis gyroscope\/accelerometer, and a high-precision barometer. This board runs ArduPilot firmware, enabling autonomous flight modes, GPS waypoint navigation, and stabilisation.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003eATmega2560 + ATmega32U-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003eMPU-6000 (gyro\/accel), MS5611 (baro), HMC5883L (compass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e7–20V via power module or BEC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePWM Outputs\u003c\/td\u003e\n\u003ctd\u003e8 channels (up to 12 with PPM\/SBUS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~33g (board only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e70 x 47 x 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAutonomous quadcopter with GPS waypoint navigation\u003c\/li\u003e\n\u003cli\u003eFixed-wing UAV with stabilisation and return-to-home\u003c\/li\u003e\n\u003cli\u003eMulti-rotor drone for aerial photography\u003c\/li\u003e\n\u003cli\u003eRover or boat with ArduPilot autonomy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThe APM 2.8 works with ArduPilot firmware and is compatible with most RC receivers (PWM, PPM, SBUS). It pairs directly with GPS modules like uBlox NEO-6M\/7M for navigation. Common combos include FPV camera transmitters and OSD modules for live video overlay.\u003c\/p\u003e\u003ch2\u003eWiring Notes\u003c\/h2\u003e\u003cp\u003eConnect the power module to the PM port for voltage\/current sensing. I2C compass is on-board; ensure no external magnetometer conflicts when adding GPS. Use vibration damping mount for best gyro performance.\u003c\/p\u003e\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\u003cdetails\u003e\u003csummary\u003eIs this compatible with ArduPilot and Mission Planner?\u003c\/summary\u003e\u003cp\u003eYes, the APM 2.8 is fully compatible with ArduPilot (Copter, Plane, Rover) and can be configured using Mission Planner software via USB.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the built-in compass work, or do I need an external one?\u003c\/summary\u003e\u003cp\u003eThe on-board HMC5883L compass works well, but for heavy current setups, an external compass\/GPS module is recommended to avoid magnetic interference.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat is the maximum current rating for the output rails?\u003c\/summary\u003e\u003cp\u003eThe servo rail can supply up to 10A combined from a dedicated BEC; the board itself draws less than 500mA.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445030347117,"sku":"CDN-0803","price":4670.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_ba901d53-c65b-4058-8fda-517018231143.jpg?v=1781512957"},{"product_id":"5010-750kv-high-torque-brushless-motor-for-drone","title":"5010 750KV High Torque Brushless Motor for Drone","description":"\u003ch1\u003e5010 750KV High Torque Brushless Motor for Drone\u003c\/h1\u003e\n\u003cp\u003eThe 5010 750KV brushless motor delivers high torque for heavy-lift multirotors and drones. It operates efficiently at lower RPMs, making it ideal for carrying payloads or maintaining stable flight with larger propellers. With a 750KV rating, it balances power and efficiency for 4S to 6S battery setups.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor Model\u003c\/td\u003e\n\u003ctd\u003e5010\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating\u003c\/td\u003e\n\u003ctd\u003e750KV\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStator Size\u003c\/td\u003e\n\u003ctd\u003e50mm x 10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Thrust\u003c\/td\u003e\n\u003ctd\u003e1500g (12x4.5 prop, 4S)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNo-load Current\u003c\/td\u003e\n\u003ctd\u003e0.5A @10V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Continuous Current\u003c\/td\u003e\n\u003ctd\u003e25A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInternal Resistance\u003c\/td\u003e\n\u003ctd\u003e0.09Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e95g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHeavy-lift quadcopter for aerial photography\u003c\/li\u003e\n  \u003cli\u003eHexacopter for agricultural spraying\u003c\/li\u003e\n  \u003cli\u003eMultirotor with payload release for delivery\u003c\/li\u003e\n  \u003cli\u003eDIY camera gimbal drone platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eCompatible with flight controllers like Pixhawk, SP Racing F3, and Naze32 when paired with ESCs rated 30A or higher. Works with 4S-6S LiPo batteries. Pairs well with 10-12 inch carbon fiber propellers.\u003c\/p\u003e\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect the three motor wires to the ESC matching phases. Use 14-16 AWG wire for high current and secure solder joints. Mount firmly on the frame using M3 screws.\u003c\/p\u003e\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with ArduPilot?\u003c\/summary\u003e\u003cp\u003eYes, the 5010 motor works with ArduPilot-based flight controllers when paired with appropriate ESCs. Ensure the ESC can handle the motor's current draw.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat propeller size is recommended?\u003c\/summary\u003e\u003cp\u003eFor 4S batteries, 12x4.5 to 13x5.5 propellers provide a good balance. On 6S, use 10x4.5 to 11x5.5 to avoid overheating.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use this for a fixed-wing aircraft?\u003c\/summary\u003e\u003cp\u003eWhile designed for multirotors, it can work in large fixed-wing models needing high torque. Ensure adequate airflow for cooling.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445031002477,"sku":"CDN-0805","price":1920.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/download_1.jpg?v=1781522447"},{"product_id":"xyq-2-diy-wooden-drone-quadcopter-kit-build-your-own-drone","title":"XYQ 2 DIY Wooden Drone Quadcopter Kit – Build Your Own Drone","description":"\u003ch1\u003eXYQ 2 DIY Drone Quadcopter Wooden Assembly Kit – 4-Channel RC Drone\u003c\/h1\u003e\u003cp\u003eThe XYQ 2 is a DIY quadcopter kit with a laser-cut wooden frame, designed for hobbyists who want to build and fly their own drone. It includes four coreless motors, matching propellers, a flight controller with gyro stabilization, and all necessary hardware. Assembly takes about 30 minutes and requires basic soldering skills.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrame Material\u003c\/td\u003e\n\u003ctd\u003eLaser-cut plywood (wooden)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Type\u003c\/td\u003e\n\u003ctd\u003e4 × 7mm coreless brushed motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePropeller Size\u003c\/td\u003e\n\u003ctd\u003e65mm diameter (2CW, 2CCW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlight Controller\u003c\/td\u003e\n\u003ctd\u003e6-axis gyro stabilization (MPU6050-based)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver\u003c\/td\u003e\n\u003ctd\u003eCompatible with PWM or PPM 2.4GHz receivers (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirement\u003c\/td\u003e\n\u003ctd\u003e3.7V 1S LiPo battery (JST connector, not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eA stable indoor\/outdoor quadcopter for line-of-sight flying\u003c\/li\u003e\n\u003cli\u003eA platform to learn drone PID tuning and flight dynamics\u003c\/li\u003e\n\u003cli\u003eAn FPV drone by adding a micro camera and video transmitter\u003c\/li\u003e\n\u003cli\u003eA custom mini drone with alternative frame modifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis kit works with any PWM or PPM RC receiver that outputs standard servo signals. It pairs well with FlySky, FrSky, or Spektrum transmitters using compatible receivers. The flight controller runs on 3.7V; ensure your receiver and other components also support this voltage.\u003c\/p\u003e\u003ch2\u003eWiring Notes\u003c\/h2\u003e\u003cp\u003eSolder the motor wires to the flight controller pads marked M1–M4, ensuring correct polarity. Connect the receiver channels to the board using the provided jumper wires. The board includes a built-in voltage regulator, so connect a 1S battery directly to the power pins.\u003c\/p\u003e\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\u003cdetails\u003e\u003csummary\u003eIs this compatible with Spektrum DSMX transmitters?\u003c\/summary\u003e\u003cp\u003eYes, as long as you use a compatible Spektrum receiver that outputs PWM or PPM signals. The flight controller accepts standard RC signals.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes the kit include a battery or charger?\u003c\/summary\u003e\u003cp\u003eNo, the kit does not include a battery or charger. You will need a 3.7V 1S LiPo battery with a JST connector and a suitable charger.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat skill level is required for assembly?\u003c\/summary\u003e\u003cp\u003eBasic soldering experience is recommended. The wooden frame slots together without glue, but motor and receiver connections require soldering.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445031133549,"sku":"CDN-0807","price":2980.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_44a30ae6-e481-4c15-a1ca-4eb2ae724fe9.jpg?v=1781512962"},{"product_id":"antennahome-ahfpv12g-13ghz-y-type-sma-j-fpv-drone-antenna","title":"AntennaHome AHFPV1.2G 1.3GHz Y-Type SMA-J FPV Drone Antenna","description":"\u003ch1\u003eAntennaHome AHFPV1.2G 1.3GHz Y-Type SMA-J FPV Drone Antenna\u003c\/h1\u003e\n\n\u003cp\u003eThis Y-type antenna pair is designed for 1.1–1.3 GHz FPV drone and ground station use, delivering reliable video transmission over long distances. Each arm houses a resonant dipole element, and the dual SMA‑J connectors plug directly into diversity receivers to reduce signal dropout. With linear polarization and compact build, it's a go‑to upgrade for pilots seeking clear, interference‑free FPV feeds.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFrequency Range\u003c\/td\u003e\n\u003ctd\u003e1.1 – 1.3 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eSMA‑J (female socket)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAntenna Type\u003c\/td\u003e\n\u003ctd\u003eY‑Type diversity (dual dipole)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePeak Gain\u003c\/td\u003e\n\u003ctd\u003e2 dBi\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVSWR\u003c\/td\u003e\n\u003ctd\u003e≤1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eLong‑range FPV drone or fixed‑wing setup with 1.3 GHz video transmitter\u003c\/li\u003e\n  \u003cli\u003eDual‑antenna diversity ground station for improved signal reception\u003c\/li\u003e\n  \u003cli\u003eWireless video relay for remote monitoring or inspection robots\u003c\/li\u003e\n  \u003cli\u003eCustom FPV goggles upgrade with external 1.3 GHz receiver module\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eWorks with any 1.2–1.3 GHz FPV video transmitter (VTx) and receiver that has SMA‑J female ports, such as the Partom 1.2G or Lawmate series. Typically paired with diversity receivers that accept two antenna inputs. Ensure your receiver matches 50 Ω impedance to avoid signal mismatch.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSimply screw the SMA‑J connectors onto the SMA male ports of your receiver or VTx. For diversity receivers, attach both antennas; for single‑antenna setups, use only one. Avoid sharp bends in the flexible arms and orient them vertically for optimal omnidirectional coverage.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with standard 5.8 GHz FPV systems?\u003c\/summary\u003e\u003cp\u003eNo, this antenna is tuned exclusively for 1.1–1.3 GHz. Using it on 5.8 GHz will yield extremely poor range and may damage your transmitter due to impedance mismatch.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use this antenna directly with my Fat Shark goggles?\u003c\/summary\u003e\u003cp\u003eOnly if you attach a 1.3 GHz receiver module that has SMA‑J ports. Stock Fat Shark modules operate on 5.8 GHz and are not compatible without modification.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the Y‑type configuration require any special orientation?\u003c\/summary\u003e\u003cp\u003eFor best diversity gain, position the two antenna arms at roughly 90° to each other, forming an L‑shape. This captures both vertical and horizontally polarized signals, reducing multi‑path fading.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445031493997,"sku":"CDN-0808","price":320.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_66cf8343-eea7-47f4-83db-0009cfef2d8a.jpg?v=1781512963"},{"product_id":"66mm-drone-propeller-blades-set-cw-ccw-pair","title":"66mm Drone Propeller Blades Set – CW \u0026 CCW Pair","description":"\u003ch1\u003e66mm Drone Propeller Blades Set – CW \u0026amp; CCW Pair\u003c\/h1\u003e\u003cp\u003eThe 66mm Drone Propeller Blades Set includes two clockwise (CW) and two counter-clockwise (CCW) propellers designed for micro quadcopters. These lightweight polycarbonate blades provide balanced thrust for stable, responsive flight in DIY and hobbyist drone projects.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e66mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePitch\u003c\/td\u003e\n\u003ctd\u003eStandard 1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub Diameter\u003c\/td\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eCW \/ CCW pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~1.5g per propeller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBuild a pocket-size FPV quadcopter\u003c\/li\u003e\n\u003cli\u003eAssemble a lightweight indoor toy drone\u003c\/li\u003e\n\u003cli\u003eCreate a STEM educational drone kit\u003c\/li\u003e\n\u003cli\u003eConstruct a micro racing drone for competition\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThese propellers fit brushed or brushless motors with a 1.5mm shaft diameter, commonly found on 7mm or 8.5mm coreless motors. They pair well with 1S (3.7V) and 2S (7.4V) batteries and are suited for flight controllers like BetaFPV or Happymodel boards.\u003c\/p\u003e\u003ch2\u003eWiring Notes\u003c\/h2\u003e\u003cp\u003eFor proper mounting, ensure CW propellers are on motors spinning clockwise and CCW on counter-clockwise motors. Use a propeller removal tool to avoid shaft damage, and always check tightness before flight.\u003c\/p\u003e\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\u003cdetails\u003e\u003csummary\u003eIs this compatible with 8.5mm motors?\u003c\/summary\u003e\u003cp\u003eYes, the 1.5mm hub fits standard 8.5mm motor shafts. Ensure your motors have mounting holes for propellers.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow durable are these propeller blades?\u003c\/summary\u003e\u003cp\u003eMade from flexible polycarbonate, they withstand minor crashes but may break on high impact. Keep spares handy.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow many propellers are in a set?\u003c\/summary\u003e\u003cp\u003eThe set includes 4 propellers: 2 clockwise (CW) and 2 counter-clockwise (CCW), enough for one quadcopter.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445033197933,"sku":"CDN-0809","price":180.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_aff41498-23c9-4b62-a5bd-3dabed80d319.jpg?v=1781512970"},{"product_id":"612-magnetic-micro-coreless-drone-motor-15000kv-for-quadcopters","title":"612 Magnetic Micro Coreless Drone Motor 15000KV for Quadcopters","description":"\u003ch1\u003e612 Magnetic Micro Coreless Drone Motor – 6x12mm, 15000KV\u003c\/h1\u003e\n\n\u003cp\u003eThis 612 coreless brushed motor is designed for micro quadcopters and tiny whoop-class drones. With a 6mm diameter and 12mm length, it delivers high RPM in a compact form factor, making it ideal for lightweight FPV builds. Its neodymium magnets and balanced rotor deliver reliable thrust for agile indoor and outdoor flight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor Type\u003c\/td\u003e\n\u003ctd\u003eCoreless Brushed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e12mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating\u003c\/td\u003e\n\u003ctd\u003e15000KV\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e3.7V–4.2V (1S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e1.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.6g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e65mm or 75mm brushed micro quadcopter\u003c\/li\u003e\n  \u003cli\u003eFPV tiny whoop for indoor racing\u003c\/li\u003e\n  \u003cli\u003eDIY micro fixed-wing or ornithopter\u003c\/li\u003e\n  \u003cli\u003eCustom micro robot propulsion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThese motors pair with 1S brushed flight controllers such as BetaFPV Lite, Silverware, or Eachine F4 Brushed boards. They fit frames designed for 6mm motor mounts and work with 31mm to 40mm propellers having a 1.0mm press-fit hub. Common propellers include 31mm 3-blade and 4-blade types.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eEach motor has two bare wires—polarity is not fixed. Connect them to the brushed motor pads on your flight controller. Swapping the two wires will reverse motor rotation. Ensure your FC supports brushed motors with appropriate MOSFETs to handle the current draw.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with BetaFPV flight controllers?\u003c\/summary\u003e\u003cp\u003eYes, the 612 motor works with any 1S brushed flight controller designed for 6mm motor mounts, including BetaFPV Lite and Silverware boards.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat propellers fit this motor?\u003c\/summary\u003e\u003cp\u003eUse 31mm or 40mm propellers with a 1.0mm shaft press-fit. Common choices are 31mm 3-blade or 4-blade props for micro quadcopters.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use a 2S battery with these motors?\u003c\/summary\u003e\u003cp\u003eNo, these motors are rated for 1S only (3.7–4.2V). A 2S battery will exceed the voltage limit and instantly burn out the motor.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445034017133,"sku":"CDN-0810","price":35.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_9287fe38-eeb9-446b-982f-60a1e5798baa.jpg?v=1781512976"},{"product_id":"720-coreless-drone-motor-with-fan-blade-micro-drone-replacement","title":"720 Coreless Drone Motor with Fan Blade - Micro Drone Replacement","description":"\u003ch1\u003e720 Coreless Drone Motor with Fan Blade – High RPM Micro Motor\u003c\/h1\u003e\n\u003cp\u003eThe 720 magnetic micro coreless drone motor is a compact, high-speed motor designed for micro drones and small unmanned aerial vehicles. It comes with an integrated fan blade that provides efficient thrust and active cooling during operation. With its lightweight coreless design and fast response, this motor is a reliable choice for custom drone builds, tiny whoop replacements, and hobby robotics.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor Diameter\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor Length\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Voltage\u003c\/td\u003e\n\u003ctd\u003e3.7 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNo-Load Speed\u003c\/td\u003e\n\u003ctd\u003e30,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNo-Load Current\u003c\/td\u003e\n\u003ctd\u003e0.8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (with fan)\u003c\/td\u003e\n\u003ctd\u003eApprox. 3.2 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReplace a worn motor on micro drones like Tiny Whoop or Eachine models\u003c\/li\u003e\n  \u003cli\u003eConstruct a DIY micro quadcopter with a custom 3D-printed frame\u003c\/li\u003e\n  \u003cli\u003eBuild a miniature hovercraft or airboat for school science projects\u003c\/li\u003e\n  \u003cli\u003eCreate a portable mini fan for USB-powered cooling on electronics setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis motor operates on 1S LiPo batteries (3.7 V nominal) and works seamlessly with common micro flight controllers such as BetaFPV, Crazybee, and Silverware boards. It can be driven by MOSFET-based motor drivers like the DRV8833 or directly by a transistor circuit when using a PWM signal from a microcontroller. Always ensure your power source can deliver at least 1 A per motor to avoid voltage dips.\u003c\/p\u003e\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eThe motor has two wires; polarity determines rotation direction. For drone use, connect each motor to a dedicated ESC or MOSFET driver output. When testing, start with a lower PWM duty cycle to avoid sudden current surges. If the fan blade is detachable, press-fit it gently onto the shaft until flush – excessive force may damage the coreless construction.\u003c\/p\u003e\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino-based drone projects?\u003c\/summary\u003e\u003cp\u003eYes, this motor works well with Arduino and common motor drivers like L293D or L9110S when supplied with a 3.7V battery. Use PWM for speed control and a separate power rail to avoid brownouts on the Arduino.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the fan blade be replaced or removed?\u003c\/summary\u003e\u003cp\u003eThe fan blade is press-fitted onto the 0.8 mm shaft and can be gently pulled off if needed. Replacement blades of similar hub size are available from our store; ensure a snug fit to prevent slipping at high RPM.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill this motor survive a crash?\u003c\/summary\u003e\u003cp\u003eCoreless motors are relatively durable but can be damaged by direct impact to the can or shaft. With the fan blade acting as a shield, the risk is reduced. If a motor stops spinning after a crash, check for bent shaft or debris inside the housing.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445034148205,"sku":"CDN-0816","price":55.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_e5e53425-c1c9-412d-981a-f407de47ec87.jpg?v=1781512977"},{"product_id":"816-magnetic-micro-coreless-drone-motor-cw-for-drones","title":"816 Magnetic Micro Coreless Drone Motor CW for Drones","description":"\u003ch1\u003e816 Magnetic Coreless Drone Motor CW (Clockwise)\u003c\/h1\u003e\n\n\u003cp\u003eIntroducing the 816 magnetic micro coreless drone motor, a compact and high-performance motor designed for clockwise rotation. Perfect for micro quadcopters and mini drone builds, this motor delivers reliable thrust in a lightweight form factor. Whether you're repairing a drone or building a custom setup, it's an essential component for smooth flight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e816 Coreless Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eClockwise (CW)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (D x L)\u003c\/td\u003e\n\u003ctd\u003e8mm x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e3.7V (1S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating\u003c\/td\u003e\n\u003ctd\u003e15000 RPM\/V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.8g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e1.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Current\u003c\/td\u003e\n\u003ctd\u003e1.2A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWire Length\u003c\/td\u003e\n\u003ctd\u003e30mm (silicone)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro racing quadcopter with 65mm frame\u003c\/li\u003e\n  \u003cli\u003eTiny whoop-style indoor drone using 40mm props\u003c\/li\u003e\n  \u003cli\u003eCustom micro drone with 3D-printed frame\u003c\/li\u003e\n  \u003cli\u003eMiniature fixed-wing aircraft engine replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis 816 CW motor works with most micro drone flight controllers designed for brushed motors, such as those using 1S batteries. It pairs well with 40mm or 45mm propellers and is commonly used with boards like the BetaFPV F4 1S AIO or similar silverware-based controllers. Ensure your ESC outputs are configured for clockwise rotation.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect the red wire to positive and black to negative on a 1S brushed motor output. No external ESC is required; the motor is driven directly by a MOSFET on the flight controller. Keep wire length short to minimize voltage drop, and avoid pulling excessively on the motor wires.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with a 2S battery?\u003c\/summary\u003e\u003cp\u003eNo, this motor is rated for 3.7V (1S). Using a 2S battery (7.4V) will likely burn out the motor quickly.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use this motor with a 65mm micro drone frame?\u003c\/summary\u003e\u003cp\u003eYes, the 8mm diameter fits standard 65mm frame motor mounts, and with 40mm props it provides ample thrust for indoor flying.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat's the difference between CW and CCW?\u003c\/summary\u003e\u003cp\u003eCW motors have the red and black wires arranged for clockwise rotation when powered directly. They are used in pairs with CCW motors for stable drone flight.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445034410349,"sku":"CDN-0817","price":60.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_f510808b-fe36-405a-b11e-f9975b6366c3.jpg?v=1781512980"},{"product_id":"716-micro-coreless-drone-motor-with-55mm-propeller","title":"716 Micro Coreless Drone Motor with 55mm Propeller","description":"\u003ch1\u003e716 Magnetic Micro Coreless Drone Motor with 55mm Propeller\u003c\/h1\u003e\n\n\u003cp\u003eThe 716 magnetic micro coreless brushed motor is designed for micro drones, tiny whoops, and mini RC aircraft. With a 55mm propeller included, this motor delivers high RPM and efficient thrust on 1S LiPo power, making it ideal for lightweight builds. Its coreless design reduces weight while maintaining reliable performance for indoor and outdoor flight.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor Model\u003c\/td\u003e\n\u003ctd\u003e716 Brushed Coreless\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Voltage\u003c\/td\u003e\n\u003ctd\u003e3.7V DC (1S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating\u003c\/td\u003e\n\u003ctd\u003eApprox. 50,000 RPM\/V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePropeller Size\u003c\/td\u003e\n\u003ctd\u003e55mm (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (Motor + Prop)\u003c\/td\u003e\n\u003ctd\u003e5.2g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro FPV quadcopter (e.g., Tiny Whoop style)\u003c\/li\u003e\n  \u003cli\u003eMini RC airplane or glider\u003c\/li\u003e\n  \u003cli\u003eDIY micro drone with custom frame\u003c\/li\u003e\n  \u003cli\u003eLightweight robotics propulsion system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis motor works with micro flight controllers and brushed ESCs commonly used in micro drones, such as those from BetaFPV, Eachine, or generic multirotor boards. It pairs directly with 1S LiPo batteries (3.7V) and standard micro JST connectors. Ensure your flight controller supports brushed motor outputs.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSolder the motor wires to the brushed motor output pads on your flight controller, observing correct polarity. Typical maximum continuous current is around 2A; avoid stalling the motor or exceeding 4V to prevent damage. No pull-up resistors are needed—direct PWM control suffices.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino?\u003c\/summary\u003e\u003cp\u003eYes, you can drive this motor using a brushed motor driver board like the L293D or a MOSFET circuit with Arduino PWM pins, but note it's designed for 3.7V operation—do not exceed the voltage.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat battery do I need?\u003c\/summary\u003e\u003cp\u003eA 1S LiPo battery with a capacity between 150mAh and 300mAh is recommended for typical micro drone use, providing a good balance of flight time and weight.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use this motor without the included propeller?\u003c\/summary\u003e\u003cp\u003eYes, you can use any propeller with a 1mm bore that fits the shaft, but ensure it is appropriately sized (around 55mm) to avoid overloading the motor.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445034639725,"sku":"CDN-0820","price":60.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_926eedd8-c206-49e3-bcf0-d70d31707088.jpg?v=1781512981"},{"product_id":"816-magnetic-micro-coreless-drone-motor-ccw-anticlockwise-8x16mm","title":"816 Magnetic Micro Coreless Drone Motor CCW (Anticlockwise) – 8x16mm","description":"\u003ch1\u003e816 Magnetic Micro Coreless Drone Motor CCW (Anticlockwise) – 8x16mm\u003c\/h1\u003e\n\n\u003cp\u003eThe 816 Magnetic Micro Coreless Drone Motor CCW is a compact, high-speed motor designed for micro drones and quadcopters. Measuring just 8mm in diameter and 16mm in length, this anticlockwise rotation motor delivers the precise control needed for stable flight. Its coreless design ensures fast acceleration and responsiveness, making it ideal for DIY drone builds and replacements.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8mm x 16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eCCW (Anticlockwise)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e3.0-3.7V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRPM at 3.7V\u003c\/td\u003e\n\u003ctd\u003e~30,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~2g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBuild a micro quadcopter for FPV racing or indoor flying\u003c\/li\u003e\n  \u003cli\u003eAssemble a tiny whoop-style drone for aerial acrobatics\u003c\/li\u003e\n  \u003cli\u003eCreate a micro RC plane with differential thrust control\u003c\/li\u003e\n  \u003cli\u003eDesign a mini robotic project requiring compact, high-speed propulsion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis motor is compatible with all standard micro drone flight controllers that support brushed motors, such as those with MOSFET outputs. It operates at 3.0-3.7V, making it ideal for 1S LiPo battery setups. Commonly paired with 45mm propellers and micro receiver boards like the CC2500 or A7105.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSolder the red wire to the positive motor output and black to negative for anticlockwise rotation. Ensure the motor driver can handle the current draw (around 1A). No additional components required; direct connection suffices.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Betaflight-based flight controllers?\u003c\/summary\u003e\u003cp\u003eYes, if your flight controller has brushed motor outputs, you can connect this motor directly. For Betaflight, ensure the motor output is configured for brushed PWM.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use this motor for a 2S setup?\u003c\/summary\u003e\u003cp\u003eNo, this motor is rated for 1S voltage (3.0-3.7V). Using 2S (7.4V) will likely damage the motor due to excessive current and RPM.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the difference between CW and CCW motors?\u003c\/summary\u003e\u003cp\u003eCCW motors rotate anticlockwise when connected correctly. They are paired with CW motors on a quadcopter to cancel torque. Often, CCW motors have a different thread direction on the shaft for propeller nuts.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445035295085,"sku":"CDN-0818","price":60.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_e61f649b-f6ee-4134-8705-99089c0b6a57.jpg?v=1781512988"},{"product_id":"37v-30c-800mah-lithium-polymer-battery-yy802535-for-drones","title":"3.7V 30C 800mAh Lithium-Polymer Battery YY802535 for Drones","description":"\u003ch1\u003e3.7V 30C 800mAh Lithium-Polymer Rechargeable Battery (YY802535) for Drones\u003c\/h1\u003e\n\n\u003cp\u003eThe 3.7V 30C 800mAh Lithium-Polymer (LiPo) battery is a compact, high-discharge power source designed for micro drones, FPV quads, and DIY electronics. With a continuous discharge rating of 30C, it can deliver up to 24 amps, ensuring responsive throttle and stable flight. This YY802535 cell is lightweight, rechargeable, and equipped with a standard JST connector for easy integration.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNominal Voltage\u003c\/td\u003e\n\u003ctd\u003e3.7V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e800mAh\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDischarge Rating (C)\u003c\/td\u003e\n\u003ctd\u003e30C continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eContinuous Current\u003c\/td\u003e\n\u003ctd\u003e24A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (LxWxH)\u003c\/td\u003e\n\u003ctd\u003e~35 x 25 x 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~22g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro FPV racing drone\u003c\/li\u003e\n  \u003cli\u003eHobby-grade quadcopter (\u0026lt; 100mm frame)\u003c\/li\u003e\n  \u003cli\u003eRemote-controlled airplane or glider\u003c\/li\u003e\n  \u003cli\u003eDIY portable electronics project (e.g., LED panel, IoT tracker)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis 3.7V LiPo is compatible with small flight controllers and ESC stacks that accept 1S input, such as BetaFPV, Happymodel, or custom Arduino-based drone controllers. It works with most micro brushed or brushless motor setups under 24A total draw. Ideal for 65mm-85mm whoop frames and toothpick builds.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect the red wire to positive (VCC) and black to ground. The JST connector is polarized; ensure correct orientation. Never exceed the 24A continuous current limit, and always monitor battery voltage to prevent over-discharge below 3.0V.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with BetaFPV 65S?\u003c\/summary\u003e\u003cp\u003eYes, the JST connector and 1S voltage match the BetaFPV 65S whoop. Ensure the battery physically fits the frame mount.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat charger should I use?\u003c\/summary\u003e\u003cp\u003eA basic 1S LiPo charger with JST compatibility, such as the ISDT Q6 Nano or a simple USB charger, works. Set to 4.2V and charge at 0.8A (1C) or lower.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow long does it last in flight?\u003c\/summary\u003e\u003cp\u003eWith normal flying, expect 3-5 minutes on a typical micro quadcopter. Flight time varies with throttle usage, weight, and motor KV.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445035655533,"sku":"CDN-0826","price":350.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_95ac4829-1ca7-4376-8649-5d4b6da6dd9a.jpg?v=1781512995"},{"product_id":"a2212-10t13t-1000kv-brushless-drone-motor","title":"A2212 10T\/13T 1000KV Brushless Drone Motor","description":"\u003ch1\u003eA2212 1000KV Brushless Outrunner Motor for Drones\u003c\/h1\u003e\n\u003cp\u003eThe A2212 1000KV brushless DC motor is a reliable outrunner designed for multirotor and fixed-wing hobby aircraft. With a KV rating of 1000 RPM per volt, it strikes a balance between torque and speed, making it ideal for 8- to 10-inch propellers on 3S LiPo batteries. Its compact 22 mm stator diameter and 12 mm height keep weight low while maintaining efficiency.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating\u003c\/td\u003e\n\u003ctd\u003e1000 RPM\/V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStator Size\u003c\/td\u003e\n\u003ctd\u003e22 x 12 mm (A2212)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Continuous Current\u003c\/td\u003e\n\u003ctd\u003e12 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended Propeller\u003c\/td\u003e\n\u003ctd\u003e10x4.5 on 3S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e7.4 – 12.6 V (2S – 3S)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e3.17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 50 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWinding Turns\u003c\/td\u003e\n\u003ctd\u003e10T \/ 13T variants (this is 10T)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eF450 or similar quadcopter frame with 10-inch props\u003c\/li\u003e\n  \u003cli\u003eTricopter with a tilt mechanism for yaw control\u003c\/li\u003e\n  \u003cli\u003eFixed-wing drone like the FT Explorer or simple delta wing\u003c\/li\u003e\n  \u003cli\u003eCustom camera gimbal with direct-drive motor control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis motor mates with common 30 A SimonK or BLHeli ESCs using 3.5 mm bullet connectors. It works with any flight controller that outputs standard PWM signals, including Betaflight, ArduPilot, and KK2 boards. A 3S battery with at least 2200 mAh capacity and 30C discharge is recommended for stable flight.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eThe three motor wires connect in any order to the three ESC output pads; swapping any two reverses rotation. Ensure the bullet connectors are fully seated and insulated. No pull-up resistors are needed, but keep the ESC power and signal wires away from the motor bell to avoid interference.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino-based flight controllers?\u003c\/summary\u003e\u003cp\u003eYes, it works with any Arduino-compatible board that generates PWM signals, such as MultiWii or custom builds using the Servo library. Just ensure the ESC is properly calibrated.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use a 4S battery with this motor?\u003c\/summary\u003e\u003cp\u003eWhile physically possible, it is not recommended. On 4S, the motor will draw excessive current and overheat with 10-inch props. Use only 2S–3S within the rated voltage range.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the motor come with mounting screws and a propeller adapter?\u003c\/summary\u003e\u003cp\u003eThe motor includes an X-shaped mounting bracket and a collet-style prop adapter for 5 mm shafts. M3 screws for mounting are not included; use standard frame hardware.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445035753837,"sku":"CDN-0830","price":390.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_3fa65e6a-6b8d-41af-a8bb-75c19d65479d.jpg?v=1781512997"},{"product_id":"1045-drone-propeller-set-cwccw-pair-for-multirotors","title":"1045 Drone Propeller Set - CW\/CCW Pair for Multirotors","description":"\u003ch1\u003e1045 Drone Propeller Blade Set - CW and CCW Pair\u003c\/h1\u003e\n\n\u003cp\u003eThis set includes one clockwise (CW) and one counter-clockwise (CCW) 1045 propeller, essential for quadcopters and multirotors. Made from durable reinforced nylon, these 10-inch propellers balance thrust and efficiency for stable, responsive flight. Ideal as spare replacements or for DIY drone projects requiring reliable performance.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e10 inches (254 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePitch\u003c\/td\u003e\n\u003ctd\u003e4.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eReinforced Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e1x CW, 1x CCW\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHub Bore\u003c\/td\u003e\n\u003ctd\u003e5 mm (standard shaft size)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox 15 g per propeller\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDIY quadcopter with stable hovering and agile manoeuvres\u003c\/li\u003e\n  \u003cli\u003eHexacopter or octocopter for increased payload capacity\u003c\/li\u003e\n  \u003cli\u003eAerial photography drone with vibration-dampened mounts\u003c\/li\u003e\n  \u003cli\u003eEducational drone kit for hands-on STEM learning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThese 1045 propellers pair well with brushless motors in the 800–1000 KV range, such as 2212 or 2205 sizes, running on 3S–4S LiPo batteries. They fit standard 5 mm motor shafts and work with common flight controllers like Betaflight, ArduPilot, and Pixhawk. Not intended for high-RPM racing drones; best for steady flight builds.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eMount the CW propeller on a clockwise-spinning motor and the CCW on a counter-clockwise motor—check motor direction before tightening. Secure with a nylock nut or spinner, and use prop adapters if the shaft diameter differs. Avoid over-tightening to prevent hub stress cracks.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with DJI drones?\u003c\/summary\u003e\u003cp\u003eNo, these propellers are designed for DIY multirotors using standard brushless motors. DJI drones typically use proprietary, self-tightening propellers specific to each model.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the difference between CW and CCW propellers?\u003c\/summary\u003e\u003cp\u003eCW propellers spin clockwise to generate lift, while CCW propellers spin counter-clockwise. Using one of each on a quadcopter cancels out torque for stable flight.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo these propellers come with nuts or adapters?\u003c\/summary\u003e\u003cp\u003eThe set includes only the two propellers. Motor shaft nuts or prop adapters are sold separately, commonly in 5 mm nylock or spinner styles.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445035852141,"sku":"CDN-0831","price":60.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_e66b6028-c196-43a4-b925-0e2e95fbba4d.jpg?v=1781512998"},{"product_id":"6x15mm-coreless-drone-motor-50000rpm-37-42v-pack-of-2","title":"6x15mm Coreless Drone Motor - 50000RPM 3.7-4.2V Pack of 2","description":"\u003ch1\u003e6x15mm Coreless Drone Motor (3.7V-4.2V, 50000RPM) - 2 Pieces\u003c\/h1\u003e\n\n\u003cp\u003eThis is a compact 6mm diameter, 15mm long coreless brushed motor designed for micro drones and DIY projects. It delivers up to 50000 RPM at 3.7V to 4.2V, making it ideal for tiny whoop-style quadcopters, micro planes, and other lightweight builds. The pack includes two motors, each weighing only about 1.5 grams, ready to wire into your next creation.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor Type\u003c\/td\u003e\n\u003ctd\u003eCoreless Brushed DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6mm diameter x 15mm length\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Voltage\u003c\/td\u003e\n\u003ctd\u003e3.7V - 4.2V (1S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNo-load Speed\u003c\/td\u003e\n\u003ctd\u003e50000 RPM at 3.7V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e1.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight per Motor\u003c\/td\u003e\n\u003ctd\u003e~1.5g (with wires)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDIY micro quadcopter (65mm frame class)\u003c\/li\u003e\n  \u003cli\u003eRC airplane for indoor flying\u003c\/li\u003e\n  \u003cli\u003eMiniature motorized robot or rover\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-vibration-motor-haptic-patterns\"\u003eVibration motor for haptic feedback projects\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThese motors work with common 1S brushed flight controllers like BetaFPV Lite, Eachine Brushed, or any board with PWM-driven motor pads. They pair perfectly with 31mm or 40mm propellers and 200-300mAh LiPo batteries. Voltage should not exceed 4.2V; no additional driver is needed for simple on\/off control.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSolder the two wires directly to motor outputs—polarity determines rotation direction. For constant-speed use, a transistor or MOSFET is recommended with a microcontroller, as these motors can draw up to 2A at stall. Always secure propellers firmly to prevent fly-offs.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino Uno?\u003c\/summary\u003e\u003cp\u003eYes, but you must use a motor driver (e.g., L293D or a MOSFET) and a separate 3.7V power supply. Direct connection to Arduino pins may damage the board.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat propellers should I use?\u003c\/summary\u003e\u003cp\u003e31mm or 40mm props with a 1mm bore are recommended. For quadcopters, use four pairs of clockwise and counter-clockwise props for stable flight.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I run these at a lower voltage?\u003c\/summary\u003e\u003cp\u003eThey will spin slower below 3.7V. Minimum operating voltage is around 2.5V, but performance drops significantly. Avoid exceeding 4.2V to prevent burnout.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445036245357,"sku":"CDN-0832","price":70.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_64e0fb21-fc4c-4a0f-b7c5-c4ff80a0dea4.jpg?v=1781513001"},{"product_id":"55mm-drone-propeller-blades-cw-ccw-pair-compoden","title":"55mm Drone Propeller Blades CW CCW Pair - Compoden","description":"\u003ch1\u003e55mm Drone Propeller Blades (CW, CCW Pair) for Mini Drones\u003c\/h1\u003e\n\n\u003cp\u003eThese 55mm drone propeller blades are designed for small quadcopters and mini drones. Sold as a pair with one clockwise (CW) and one counter-clockwise (CCW) rotation, they provide balanced thrust for stable flight. Made from durable plastic, they are lightweight and resistant to minor crashes.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e55mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eCW \u0026amp; CCW Pair\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Hole Diameter\u003c\/td\u003e\n\u003ctd\u003e1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eDurable Plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 2g each\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack (subject to availability)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMicro quadcopter for indoor flying\u003c\/li\u003e\n  \u003cli\u003eDIY drone with brushed motors\u003c\/li\u003e\n  \u003cli\u003eReplacement propellers for Hubsan or Syma style mini drones\u003c\/li\u003e\n  \u003cli\u003eTiny whoop alternative with custom frame\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThese propellers fit motors with a 1.5mm shaft, commonly found on 7x16mm, 8x20mm, or 8.5x20mm coreless motors. They are suitable for mini drones like the Hubsan X4, Syma X5C, and similar micro quadcopters. They also pair well with 3.7V brushed motor setups.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eEnsure the CW propeller is mounted on the motor spinning clockwise and the CCW on the motor spinning counter-clockwise. Press firmly onto the motor shaft—no adhesives needed. For brushed motors, check motor rotation before final mounting.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino-based drones?\u003c\/summary\u003e\u003cp\u003eYes, if your drone uses motors with a 1.5mm shaft. The propellers are standard for small brushed motor drones commonly controlled by Arduino flight controllers.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo these come in other colors?\u003c\/summary\u003e\u003cp\u003eTypically, they are black. Color availability may vary; contact us if color is critical.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use these on a 5-inch drone?\u003c\/summary\u003e\u003cp\u003eNo, these are 55mm (about 2.2 inches) and designed for micro drones. For 5-inch props, see our larger propeller selection.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445036900717,"sku":"CDN-0833","price":40.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_7472df4d-4322-4adf-a77b-6fa932cb4d57.jpg?v=1781513005"},{"product_id":"30a-esc-electronic-speed-controller-for-brushless-motors","title":"30A ESC Electronic Speed Controller for Brushless Motors","description":"\u003ch1\u003e30A Brushless ESC Speed Controller (2-4S LiPo, 5V BEC)\u003c\/h1\u003e\u003cp\u003eThe 30A ESC is an electronic speed controller designed for brushless motors in drones, RC planes, and multirotors. It delivers stable throttle response and efficient power management, supporting 2-4S LiPo batteries. Its onboard 5V\/3A BEC powers your flight controller and receiver directly.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous Current\u003c\/td\u003e\n\u003ctd\u003e30A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst Current (10s)\u003c\/td\u003e\n\u003ctd\u003e40A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e2-4S LiPo (7.4-14.8V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBEC Output\u003c\/td\u003e\n\u003ctd\u003e5V \/ 3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFirmware\u003c\/td\u003e\n\u003ctd\u003eSimonK \/ BLHeli compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e25g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e250mm FPV racing quadcopter\u003c\/li\u003e\n\u003cli\u003eDIY RC airplane with brushless motor\u003c\/li\u003e\n\u003cli\u003eSmall camera gimbal stabilizer\u003c\/li\u003e\n\u003cli\u003eArduino-based motor test bench\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cp\u003eThis ESC works with brushless motors drawing up to 30A and is compatible with most flight controllers like Naze32, KK2, or Arduino-based boards. The 5V BEC can power standard receivers and microcontrollers; ensure your motor’s KV rating matches 2-4S voltage.\u003c\/p\u003e\u003ch2\u003eWiring Notes\u003c\/h2\u003e\u003cp\u003eConnect the three motor wires to the ESC outputs (order doesn’t matter for direction), battery leads to a 2-4S LiPo, and the servo plug to your flight controller’s motor output pin. No external pull-up resistors are needed.\u003c\/p\u003e\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino?\u003c\/summary\u003e\u003cp\u003eYes, you can control it via a servo library with a standard 5V signal from any Arduino PWM pin.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I flash BLHeli firmware?\u003c\/summary\u003e\u003cp\u003eMany 30A ESCs support BLHeli bootloader via the signal wire; check the manufacturer's documentation for flashing procedure.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat gauge wire should I use?\u003c\/summary\u003e\u003cp\u003e16-18 AWG silicone wire is recommended for the battery leads to handle up to 30A continuously.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445076844909,"sku":"CDN-0918","price":830.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/download_538a952e-045a-477c-a258-008b59aabf26.jpg?v=1781522140"},{"product_id":"3s-lipo-2200mah-111v-high-discharge-battery-for-drones-rc-projects","title":"3S LiPo 2200mAh 11.1V High Discharge Battery for Drones \u0026 RC Projects","description":"\u003ch1\u003e3S LiPo 2200mAh 11.1V Battery Pack — Reliable Power for Drones and RC Models\u003c\/h1\u003e\n\n\u003cp\u003eThis is a 3-cell (3S) lithium polymer battery pack with a nominal voltage of 11.1V and a capacity of 2200mAh. It delivers high discharge rates for demanding applications like multirotor drones, RC aircraft, and ground vehicles. The XT60 connector ensures secure, low-resistance connections for consistent performance.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e3S1P\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNominal Voltage\u003c\/td\u003e\n\u003ctd\u003e11.1V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e2200mAh\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eContinuous Discharge\u003c\/td\u003e\n\u003ctd\u003e25C (55A)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eXT60\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (approx.)\u003c\/td\u003e\n\u003ctd\u003e105 x 35 x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFPV racing or freestyle drone\u003c\/li\u003e\n  \u003cli\u003eRC car or truck with high-torque motor\u003c\/li\u003e\n  \u003cli\u003eAutonomous robot with motor drivers and sensors\u003c\/li\u003e\n  \u003cli\u003ePortable 12V supply for Arduino or Raspberry Pi projects (with regulator)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis 3S LiPo works with most drones and RC vehicles designed for 11.1V systems. It pairs well with flight controllers like Pixhawk or Naze32, and with ESCs rated for 3S. The XT60 connector is a standard in hobby-grade electronics. For development boards, use a step-down regulator to avoid overvoltage.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eAlways connect the XT60 plug with correct polarity — red to positive, black to ground. Use a balance charger that supports 3S LiPo batteries and connect both the main discharge lead and the balance lead. Never discharge below 3.0V per cell to prevent damage.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with DJI drones?\u003c\/summary\u003e\u003cp\u003eThis is a standard 3S LiPo, but DJI drones often use proprietary smart batteries. Check your drone's manual for voltage and connector compatibility before use.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat charger should I use?\u003c\/summary\u003e\u003cp\u003eYou need a balance charger capable of charging 3S LiPo batteries, such as the IMAX B6 or similar. Always charge at 1C (2.2A for this pack) in a fire-safe location.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow long does it last on a single charge?\u003c\/summary\u003e\u003cp\u003eFlight or run time depends on the load. For a typical 250-size drone drawing 10A, expect around 10-12 minutes. Always land when voltage per cell reaches 3.5V under load.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445082743149,"sku":"CDN-0944","price":1530.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_be7c3748-ed65-40be-9f0f-eec3167f33fe.jpg?v=1781513201"},{"product_id":"emax-mt2213-935kv-brushless-motor-1045-prop-set-ccw-red-cap","title":"Emax MT2213 935kV Brushless Motor 1045 Prop Set CCW Red Cap","description":"\u003ch1\u003eEmax MT2213 935kV Brushless Drone Motor with 1045 Propeller Set CCW - Red Cap\u003c\/h1\u003e\n\u003cp\u003eThe Emax MT2213 is a 935KV brushless outrunner motor designed for quadcopters and fixed-wing drones. It delivers efficient thrust with 1045 propellers on 3S or 4S LiPo packs. The CCW thread and red anodized cap make it easy to identify and match with a CW counterpart.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor Model\u003c\/td\u003e\n\u003ctd\u003eMT2213\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating\u003c\/td\u003e\n\u003ctd\u003e935 RPM\/V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStator Size\u003c\/td\u003e\n\u003ctd\u003e22mm x 13mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e12N14P\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Thrust (3S, 1045)\u003c\/td\u003e\n\u003ctd\u003e~750g per motor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (Motor Only)\u003c\/td\u003e\n\u003ctd\u003e~56g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eQuadcopter with a 450mm frame and 3S battery\u003c\/li\u003e\n  \u003cli\u003eFPV freestyle quad on 4S with 1045 props\u003c\/li\u003e\n  \u003cli\u003eFixed-wing UAV in pusher configuration\u003c\/li\u003e\n  \u003cli\u003eTricopter with a yaw mechanism for stable flight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003ePairs well with 30A SimonK or BLHeli ESCs and flight controllers like Pixhawk, Naze32, or CC3D. The 1045 propellers included suit frames with at least 250mm diagonal motor spacing. Use 3S 2200–4000mAh or 4S 1500–2200mAh batteries. The 16x19mm mounting pattern fits most carbon fiber and glass fiber arms.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSolder the three motor wires to your ESC in any order; swap any two to reverse direction. Ensure the propeller nut tightens counterclockwise to match the CCW thread. Keep peak current below 12A per motor.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with 4S LiPo batteries?\u003c\/summary\u003e\u003cp\u003eYes, the MT2213 can handle 4S with 1045 props, but throttle management is recommended to stay below the 12A continuous rating and prevent overheating.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes this motor come with propellers?\u003c\/summary\u003e\u003cp\u003eYes, the set includes two CCW 1045 propellers with the matching red cap.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat frame size is this motor designed for?\u003c\/summary\u003e\u003cp\u003eThe 2213 stator is best suited for 450mm class quadcopter frames. It is too large and heavy for 250mm racing frames.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445130420589,"sku":"CDN-0806","price":1390.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_af4e7c19-ee79-459c-96bc-295bd1fee75d.jpg?v=1781513487"},{"product_id":"720-magnetic-coreless-drone-motor-set-2cw2ccw-high-speed-mini","title":"720 Magnetic Coreless Drone Motor Set (2CW+2CCW) High-Speed Mini","description":"\u003ch1\u003e720 Magnetic Micro Coreless Drone Motors Set (2 CW + 2 CCW)\u003c\/h1\u003e\n\u003cp\u003eThe 720 magnetic micro coreless drone motor set delivers four high‑speed motors in a matched pair configuration: two clockwise (CW) and two counter‑clockwise (CCW). These 7 mm diameter, 20 mm long coreless motors are built for mini quadcopters and tiny whoop‑style builds where low weight and fast throttle response matter. Neodymium magnets inside each shell produce consistent torque on a single LiPo cell, so you can build a responsive micro drone without complex gearing.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor diameter\u003c\/td\u003e\n\u003ctd\u003e7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor length\u003c\/td\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003e2 CW, 2 CCW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated voltage\u003c\/td\u003e\n\u003ctd\u003e3.7 V (1S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft diameter\u003c\/td\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight per motor\u003c\/td\u003e\n\u003ctd\u003e~3 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA 65 mm‑class tiny whoop with a 1S brushed flight controller and 31 mm props\u003c\/li\u003e\n\u003cli\u003eA lightweight indoor micro quadcopter that fits into the palm of your hand\u003c\/li\u003e\n\u003cli\u003eA simple thrust‑vectored paper plane with differential motor control\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/kit-line-follower-robot\"\u003eA miniature vibration robot or a two‑motor line follower using the CW\/CCW pair alone\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThese motors pair directly with 1S brushed flight controllers such as BetaFPV Lite, Eachine Beecore, or generic F3\/F4 brushed boards. They accept propellers with a 1 mm shaft hole; typical choices are 31 mm 2‑blade or 40 mm 2‑blade propellers. Because each motor draws around 2 A at full throttle, use a battery capable of 10 A continuous discharge – a 300‑450 mAh 1S LiPo works well.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSolder the motor wires directly to the flight controller’s ESC pads. CW motors often have red and blue leads, while CCW motors have black and white leads. Always verify rotation by briefly powering up before final assembly; swap any two wires of a brushed motor to reverse its direction.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with the BetaFPV Lite brushed flight controller?\u003c\/summary\u003e\u003cp\u003eYes. The 720 motors work with any 1S brushed board that uses standard FET‑driven motor outputs, including the BetaFPV Lite series. Just solder the wires to the motor pads and confirm the correct rotation direction.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat battery should I use with these motors?\u003c\/summary\u003e\u003cp\u003eA 1S LiPo battery rated 3.7 V with 300–450 mAh capacity and at least 30C discharge (to handle 2 A per motor) is recommended. JST‑PH or Molex connectors are typical for this class of micro drone.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need to program rotation direction, or is it fixed?\u003c\/summary\u003e\u003cp\u003eThe rotation direction is physically determined by the motor’s internal construction; CW and CCW units are pre‑marked. You cannot change direction through software, so use the correct motor in each arm position. If a motor spins the wrong way, swap it with the opposite rotation type.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445130584429,"sku":"CDN-0813","price":440.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_8b4cc631-43bd-4405-b626-2cb1baebf1e8.jpg?v=1781513490"},{"product_id":"a22126t-2200kv-bldc-drone-motor-for-quadcopters","title":"A2212\/6T 2200kV BLDC Drone Motor for Quadcopters","description":"\u003ch1\u003eA2212\/6T 2200kV BLDC Drone Motor\u003c\/h1\u003e\n\u003cp\u003eThe A2212\/6T is a 2200kV brushless DC motor engineered for mini quadcopters and racing drones. Its high RPM per volt delivers fast throttle response with 5-inch propellers and 3-4S LiPo batteries, making it a go‑to for lightweight, agile builds.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating (RPM\/V)\u003c\/td\u003e\n\u003ctd\u003e2200\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Current (A)\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter (mm)\u003c\/td\u003e\n\u003ctd\u003e3.17\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight (g)\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended Prop Size\u003c\/td\u003e\n\u003ctd\u003e5‑6 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e250‑size mini racing quadcopter\u003c\/li\u003e\n  \u003cli\u003eFPV freestyle build with 5‑inch props\u003c\/li\u003e\n  \u003cli\u003eLightweight 3D‑printed quadcopter frame\u003c\/li\u003e\n  \u003cli\u003eHigh‑speed line‑of‑sight acro drone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003ePairs with 30A ESCs and standard flight controllers like Betaflight. The 16x19mm mounting pattern suits most 220‑250mm carbon fibre frames. Runs on 2‑4S LiPo; always match ESC amp rating to battery cell count.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSolder the three motor leads to the ESC output pads in any order. Swap any two wires to reverse rotation. Keep ESC signal ground connected and use a 30A‑rated ESC to avoid overheating at full throttle.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with 5‑inch three‑blade props?\u003c\/summary\u003e\u003cp\u003eYes, the 2200kV motor is optimized for 5‑inch two‑ or three‑blade props on 3‑4S, producing ample thrust without overheating.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use a 4S battery with this motor?\u003c\/summary\u003e\u003cp\u003e4S is supported, but ensure your ESC is rated for 30A or more and monitor motor temperature during the first flights.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat mounting screws are included?\u003c\/summary\u003e\u003cp\u003eThe motor includes a prop adapter; M3 mounting screws for the frame are provided. Verify frame thickness to choose appropriate screw length.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445132091757,"sku":"CDN-0819","price":470.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_6e6fdf3d-88e8-4ac5-88b5-f9912236eff7.jpg?v=1781513493"},{"product_id":"bluesky-mini-5v-3a-ubec-for-rc-drones-and-ptz-gimbals","title":"Bluesky Mini 5V 3A UBEC for RC Drones and PTZ Gimbals","description":"\u003ch1\u003eBluesky Mini 5V 3A UBEC\u003c\/h1\u003e\n\u003cp\u003eThis UBEC steps down higher voltages from 2S–6S LiPo batteries to a clean 5V direct current. Designed for RC drones, PTZ gimbals, and small robotic assemblies where space and weight matter, it delivers 3 A continuously without brownout, keeping flight controllers, servos, and cameras stable.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e6V – 26V DC (2S–6S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e5V ±0.2V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eContinuous Current\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePeak Current\u003c\/td\u003e\n\u003ctd\u003e5A (short burst)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRegulator Type\u003c\/td\u003e\n\u003ctd\u003eSynchronous buck (switching)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e25mm × 15mm × 5mm (approx.)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFPV drone clean power hub – eliminate servo jitter and video noise\u003c\/li\u003e\n  \u003cli\u003e3‑axis brushless gimbal controller supply from a single flight battery\u003c\/li\u003e\n  \u003cli\u003eRaspberry Pi companion computer for drone autonomy projects\u003c\/li\u003e\n  \u003cli\u003eBench‑top servo tester powered directly from a LiPo pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe 5 V output works with standard RC receivers, Pixhawk, APM flight controllers, and most 5 V servos. It pairs naturally with any 2S–6S LiPo pack or 12 V–24 V DC source. The switching regulator stays cool, unlike linear BECs, so it runs reliably alongside ESCs and high‑drain components.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eRed wire is input positive, black is ground. Connect the battery side to your flight pack via a JST or bullet connector. Output leads supply 5 V to your load; keep the total continuous draw below 3 A and use adequate wire gauge for the length. Avoid paralleling multiple UBECs unless you add isolation diodes.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with DJI FPV air units?\u003c\/summary\u003e\u003cp\u003eThe 5 V output can power accessories that accept 5 V, but the DJI air unit itself requires a higher voltage (7.4‑17.6 V). Use this UBEC only for auxiliary 5 V gear.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it to power an Arduino flight controller directly?\u003c\/summary\u003e\u003cp\u003eYes. The stable 5 V output matches the Vin pin requirements of Arduino boards. Just ensure the total load (Arduino + sensors + peripherals) does not exceed 3 A.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat happens if I exceed the input voltage?\u003c\/summary\u003e\u003cp\u003eInputs above 26 V may damage the regulator. Always confirm your battery’s maximum voltage and allow a margin if using a fully charged 6S LiPo (25.2 V).\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445135860077,"sku":"CDN-0827","price":240.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_847468b1-d8a2-426b-beb8-6814442eb563.jpg?v=1781513504"},{"product_id":"998-pro-max-4k-foldable-mini-drone-wifi-fpv-quadcopter","title":"998 PRO MAX 4K Foldable Mini Drone | WiFi FPV Quadcopter","description":"\u003ch1\u003e998 PRO MAX 4K Foldable Mini Drone\u003c\/h1\u003e\n\u003cp\u003eThe 998 PRO MAX is a foldable mini quadcopter with a 4K wide-angle camera and real-time WiFi FPV streaming. Designed for stable indoor and outdoor flight, it captures high-definition aerial footage and fits in your pocket. The integrated altitude hold and one-key return make it easy to fly for beginners and enthusiasts alike.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCamera Resolution\u003c\/td\u003e\n\u003ctd\u003e4K (3840×2160) wide-angle lens\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFPV Transmission\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz WiFi, real-time to app\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFlight Time\u003c\/td\u003e\n\u003ctd\u003e10–12 minutes per charge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003e3.7V 500mAh Li-Po (modular, USB rechargeable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoldable Size\u003c\/td\u003e\n\u003ctd\u003e130 × 75 × 50 mm (unfolded: 240 mm diagonal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eControl Range\u003c\/td\u003e\n\u003ctd\u003eUp to 80 metres (app\/remote)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCapture cinematic 4K aerial footage for travel vlogs and social media\u003c\/li\u003e\n  \u003cli\u003eCreate real-time FPV monitoring for small events or field inspections\u003c\/li\u003e\n  \u003cli\u003eFold and carry as a pocket drone for spontaneous outdoor adventures\u003c\/li\u003e\n  \u003cli\u003eUse as a training platform to learn multirotor flight dynamics and manual control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe drone works with Android 5.0+ and iOS 10.0+ smartphones via the KY FPV or similar WiFi app. It includes a 2.4 GHz remote controller and supports standard 3.7V 500–600 mAh Li-Po batteries with JST connector. The camera module pairs with any direct-sync WiFi video receiver on phone or tablet.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eSlide the battery into the rear bay and connect the JST plug to the drone’s power port. Ensure the camera ribbon cable is fully seated—loose contacts cause video dropouts or flicker in FPV feed.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with DJI accessories?\u003c\/summary\u003e\u003cp\u003eNo, the 998 PRO MAX uses proprietary battery and propeller mounts and is not designed to work with DJI chargers, batteries, or gimbals.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow long does the battery take to charge?\u003c\/summary\u003e\u003cp\u003eUsing the included USB cable, a full charge takes about 60 minutes. The LED on the charger turns off when complete.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it support microSD cards?\u003c\/summary\u003e\u003cp\u003eThe drone records directly to your phone via the app. There is no microSD slot on the drone itself; video files are saved to the phone’s local storage.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445136023917,"sku":"CDN-0828","price":2310.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_eec7b5c7-aeb7-49a5-bd36-c6b352e4b262.jpg?v=1781513508"},{"product_id":"74v-lipo-2000mah-battery-2s-20c-for-drones-diy","title":"7.4V LiPo 2000mAh Battery - 2S 20C for Drones \u0026 DIY","description":"\u003ch1\u003e7.4V LiPo 2000mAh Battery\u003c\/h1\u003e\n\u003cp\u003eThe 7.4V LiPo 2000mAh battery is a 2-cell lithium polymer pack providing a nominal 7.4V output. It is commonly used to power RC cars, quadcopters, and mobile robots that need sustained high current. Its 2000mAh capacity and 20C discharge rate ensure reliable performance for demanding DIY builds.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNominal Voltage\u003c\/td\u003e\n\u003ctd\u003e7.4V (2S)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e2000mAh\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDischarge Rate\u003c\/td\u003e\n\u003ctd\u003e20C continuous \/ 40C burst\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eXT60 discharge, JST-XH balance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e~70×35×20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~120 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRC car power system with 540 brushed motor\u003c\/li\u003e\n  \u003cli\u003eDIY FPV drone or quadcopter battery pack\u003c\/li\u003e\n  \u003cli\u003eAutonomous mobile robot driven by L298N motor driver\u003c\/li\u003e\n  \u003cli\u003ePortable power bank for 5V IoT boards via step-down regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis LiPo works with any 7.4V-rated ESC, brushed motor controller, or high-power circuit. To run 5V boards like Arduino UNO or ESP32, connect a 5V buck converter between the XT60 plug and the board. It pairs well with L298N, L293D, or BTS7960 motor drivers and common RC ESCs.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eThe XT60 connector has red (positive) and black (negative) wires; ensure correct polarity. Maximum continuous current is 40 A (2000mAh × 20C), so use 14-16 AWG wire for the load path. Always charge through the JST-XH balance connector with a proper LiPo balance charger.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino?\u003c\/summary\u003e\u003cp\u003eYes, but you must use a step-down voltage regulator (buck converter) to drop the 7.4V to 5V. Connect the regulator input to the XT60 discharge plug and the output to Arduino’s Vin or 5V pin.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat charger do I need?\u003c\/summary\u003e\u003cp\u003eUse a LiPo balance charger that supports 2S (7.4V) cells. The JST-XH plug connects to the charger’s balance port. A separate charger is required; this listing includes only the battery pack.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use this for a Raspberry Pi?\u003c\/summary\u003e\u003cp\u003eYes, with a 5V\/3A step-down converter. The battery can supply enough current for a Pi and a small display, but total runtime depends on the load (approximately 1–2 hours with typical peripherals).\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445157257581,"sku":"CDN-0948","price":1180.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_b61c6e88-592e-4c68-ad13-24dcb5cb6270.jpg?v=1781513552"},{"product_id":"f450-drone-frame-kit-450mm-quadcopter-frame-for-diy-drones","title":"F450 Drone Frame Kit – 450mm Quadcopter Frame for DIY Drones","description":"\u003ch1\u003eF450 Drone Frame Kit – 450mm Quadcopter Frame for DIY Drones\u003c\/h1\u003e\n\n\u003cp class=\"product-lede\"\u003eThe F450 drone frame kit from Compoden features a durable 450mm glass fiber quadcopter frame, perfect for building custom drones with Arduino, ESP32, and Raspberry Pi flight controllers.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable class=\"specs-table\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWheelbase\u003c\/td\u003e\n\u003ctd\u003e450 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGlass fiber composite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArm Thickness\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFlight Controller Mounting\u003c\/td\u003e\n\u003ctd\u003e30.5 × 30.5 mm standard holes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIntegrated PCB\u003c\/td\u003e\n\u003ctd\u003eYes (35 × 35 mm solder pads)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor Mount Hole Spacing\u003c\/td\u003e\n\u003ctd\u003e16 × 19 mm (fits 2212 motors)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFrame Weight (without electronics)\u003c\/td\u003e\n\u003ctd\u003e~280 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum Propeller Size\u003c\/td\u003e\n\u003ctd\u003e10 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDIY Quadcopter with MPU6050:\u003c\/strong\u003e Build a basic stabilized quadcopter using Arduino Uno and a gyroscope sensor for manual or auto-level flight.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWi‑Fi Surveillance Drone:\u003c\/strong\u003e Stream live video from an ESP32‑CAM module mounted on the frame and control the drone via a smartphone app.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutonomous Object Tracker:\u003c\/strong\u003e Use a Raspberry Pi with OpenCV on this frame to detect and follow moving objects in real time.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAgricultural Sprayer Prototype:\u003c\/strong\u003e Design a drone for CBSE Class 11‑12 or ATL Tinkering Lab that simulates crop spraying with a small pump and relay.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwarm Drone Coordination:\u003c\/strong\u003e Develop a B.Tech final‑year project using multiple F450 frames with LoRa modules for synchronized tasks like search‑and‑rescue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable class=\"compat-table\"\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePlatform\u003c\/th\u003e\n\u003cth\u003eCompatible\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003cth\u003eLibrary \/ Method\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArduino Uno R3\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eGPIO D3,D9,D10,D11 (ESCs); I2C (gyro)\u003c\/td\u003e\n\u003ctd\u003eMultiWii\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArduino Nano\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eGPIO D3,D9,D10,D11; I2C\u003c\/td\u003e\n\u003ctd\u003eMultiWii\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArduino Mega 2560\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eGPIO 2‑13 (ESCs, receiver); I2C\u003c\/td\u003e\n\u003ctd\u003eMultiWii\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eESP8266 NodeMCU\u003c\/td\u003e\n\u003ctd\u003eYes (limited I\/O)\u003c\/td\u003e\n\u003ctd\u003eGPIO D1,D2,D5,D6; I2C\u003c\/td\u003e\n\u003ctd\u003eCustom (Arduino framework)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eESP32 Dev Board\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eGPIO 32,33,25,26 (ESCs)\u003c\/td\u003e\n\u003ctd\u003eESP‑Drone \/ Betaflight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRaspberry Pi Pico\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eGPIO 0,1,2,3 (PWM)\u003c\/td\u003e\n\u003ctd\u003eCustom MicroPython\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRaspberry Pi 4 \/ 5\u003c\/td\u003e\n\u003ctd\u003eYes (companion computer)\u003c\/td\u003e\n\u003ctd\u003eUART to external flight controller\u003c\/td\u003e\n\u003ctd\u003eDroneKit, MAVLink\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWiring and Interface Notes\u003c\/h2\u003e\n\u003cp\u003eThe F450 frame includes a built‑in power distribution board (PDB) with solder pads for four ESCs and a battery connector. Use 20 A SimonK ESCs and a 3S 2200 mAh LiPo battery for balanced flight with 2212 motors. Secure the flight controller on the 30.5 mm standoffs and route the motor wires cleanly through the hollow arms to avoid interference.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"faq\"\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch3\u003eWhat type of battery and ESCs should I use with this frame?\u003c\/h3\u003e\n    \u003cp\u003eA 3S 2200‑3000 mAh LiPo battery paired with 20 A ESCs (SimonK firmware) is recommended for stable performance with 2212 1000 KV motors.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv class=\"faq-item\"\u003e\n    \u003ch3\u003eCan this frame fly with a Raspberry Pi as the only controller?\u003c\/h3\u003e\n    \u003cp\u003eWhile it’s possible, the Raspberry Pi lacks real‑time motor control; it’s better to use a dedicated flight controller (like KK2.1) connected via UART.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@graph\": [\n    {\n      \"@type\": \"Product\",\n      \"@id\": \"https:\/\/compoden.in\/products\/f450-drone-frame-kit-450mm-quadcopter-frame-for-diy-drones#product\",\n      \"name\": \"F450 Drone Frame Kit – 450mm Quadcopter Frame for DIY Drones\",\n      \"description\": \"Buy F450 450mm quadcopter frame kit for DIY drone builds. Includes integrated PCB, 450mm wheelbase. Ideal for Arduino, ESP32, Pi projects. In stock at Compoden.\",\n      \"sku\": \"CDN-0977\",\n      \"mpn\": \"CDN-0977\",\n      \"brand\": {\"@type\": \"Brand\", \"name\": \"Compoden\"},\n      \"offers\": {\n        \"@type\": \"Offer\",\n        \"priceCurrency\": \"INR\",\n        \"price\": \"PRICE_PLACEHOLDER\",\n        \"availability\": \"https:\/\/schema.org\/InStock\",\n        \"seller\": {\"@type\": \"Organization\", \"name\": \"Compoden\", \"url\": \"https:\/\/compoden.in\"}\n      }\n    },\n    {\n      \"@type\": \"FAQPage\",\n      \"@id\": \"https:\/\/compoden.in\/products\/f450-drone-frame-kit-450mm-quadcopter-frame-for-diy-drones#faq\",\n      \"mainEntity\": [\n        {\"@type\": \"Question\", \"name\": \"What type of battery and ESCs should I use with this frame?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 3S 2200‑3000 mAh LiPo battery paired with 20 A ESCs (SimonK firmware) is recommended for stable performance with 2212 1000 KV motors.\"}},\n        {\"@type\": \"Question\", \"name\": \"Can this frame fly with a Raspberry Pi as the only controller?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"While it’s possible, the Raspberry Pi lacks real‑time motor control; it’s better to use a dedicated flight controller (like KK2.1) connected via UART.\"}}\n      ]\n    }\n  ]\n}\n\u003c\/script\u003e","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53454858551661,"sku":"CDN-0977","price":830.0,"currency_code":"INR","in_stock":true}]}],"url":"https:\/\/compoden.com\/collections\/drone-parts.oembed?page=2","provider":"Compoden","version":"1.0","type":"link"}