{"title":"Servo Motors","description":"\u003cp\u003eA servo turns to an exact angle and holds it, which makes it the motor for robot arms, grippers, steering, pan-tilt camera mounts and lids that open on cue.\u003c\/p\u003e\n\u003cp\u003eA hobby servo has three wires (power, ground and signal) and is controlled by a PWM pulse from your board. The Arduino Servo library, or an ESP32 servo library, handles the timing, so you simply write an angle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSG90-class micro servos\u003c\/strong\u003e are small, light and plastic-geared, ideal for light loads and learning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMG996R-class servos\u003c\/strong\u003e have metal gears and much more torque, for arms and heavier mechanisms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to choose:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePick by the torque your mechanism needs, then by size and gear material.\u003c\/li\u003e\n\u003cli\u003eFor continuous spinning, use a DC or gear motor instead. For exact steps, use a stepper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eServos draw surges of current when they move. One micro servo can run from a board for a quick test, but several servos need their own 5V supply with ground shared to the Arduino or ESP32. Otherwise the board resets or the servos jitter.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eSG90 or MG996R?\u003c\/h3\u003e\n\u003cp\u003eThe SG90 for light loads and learning. The MG996R's metal gears and higher torque suit arms and heavier mechanisms.\u003c\/p\u003e\n\u003ch3\u003eWhy does my servo jitter?\u003c\/h3\u003e\n\u003cp\u003eUsually power. Give servos their own 5V supply and share ground with the board.\u003c\/p\u003e\n\u003ch3\u003eServo, stepper or DC motor?\u003c\/h3\u003e\n\u003cp\u003eServo for exact angles, stepper for exact steps, DC for continuous spin.\u003c\/p\u003e\n\u003ch3\u003eHow many servos can an Arduino run?\u003c\/h3\u003e\n\u003cp\u003eThe signal pins are no problem. The limit is power, so use a separate supply for more than one.\u003c\/p\u003e\n\u003ch2\u003eGuides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/guides\/servo-vs-stepper-vs-dc-motor-which-for-which-project\"\u003eServo vs Stepper vs DC Motor: Which Motor for Which Project?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/guides\/servo-sg90-vs-mg996r-plastic-vs-metal-gear\"\u003eServo SG90 vs MG996R: Plastic vs Metal-Gear Servos\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/guides\/how-to-build-a-4-dof-robotic-arm\"\u003eHow to Build a 4-DOF Robotic Arm\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"SG90 or MG996R?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The SG90 for light loads and learning. The MG996R's metal gears and higher torque suit arms and heavier mechanisms.\"}}, {\"@type\": \"Question\", \"name\": \"Why does my servo jitter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Usually power. Give servos their own 5V supply and share ground with the board.\"}}, {\"@type\": \"Question\", \"name\": \"Servo, stepper or DC motor?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Servo for exact angles, stepper for exact steps, DC for continuous spin.\"}}, {\"@type\": \"Question\", \"name\": \"How many servos can an Arduino run?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The signal pins are no problem. The limit is power, so use a separate supply for more than one.\"}}]}\u003c\/script\u003e\n\u003ch2\u003eReference pages on soldr.ai\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/soldr.ai\/docs\/components\/sg90\"\u003eSG90 micro servo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/soldr.ai\/docs\/components\/mg90s\"\u003eMG90S metal gear micro servo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/soldr.ai\/docs\/components\/waveshare-st3025-bus-servo\"\u003eWaveshare ST3025 bus servo (40 kg-cm)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/soldr.ai\/docs\/components\/waveshare-bus-servo-20kg\"\u003eWaveshare 20 kg-cm bus servo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/soldr.ai\/docs\/components\/mg996r-servo\"\u003eMG996R servo\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMore guides on soldr.ai\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/soldr.ai\/blog\/servo-esp32-power-wiring\"\u003eServo power wiring on an ESP32\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDescribe your build on \u003ca href=\"https:\/\/app.soldr.ai\"\u003eSoldr\u003c\/a\u003e and it picks the parts, writes and compiles the code, and shows how to wire them. Sign in and get 100 credits free.\u003c\/p\u003e","products":[{"product_id":"sg90-servo-motor-9g-micro-servo-for-robotics-arduino","title":"SG90 Servo Motor – 9g Micro Servo for Robotics \u0026 Arduino","description":"\u003ch1\u003eSG90 9g Micro Servo Motor – 180° Rotation, 1.2kg·cm Torque\u003c\/h1\u003e\n\u003cp\u003eThe SG90 is a compact, lightweight servo motor weighing just 9 grams, designed for precise angular control in small-scale robotics and hobby electronics. It offers a rotation range of 0 to 180 degrees with a stall torque of 1.2 kg·cm at 4.8V, making it a go‑to actuator for Arduino and Raspberry Pi projects. Its reliable plastic gears and standard 3‑pin connector ensure easy integration with most microcontroller platforms.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e4.8 – 6.0 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStall Torque (4.8V)\u003c\/td\u003e\n\u003ctd\u003e1.2 kg·cm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Speed (4.8V, no load)\u003c\/td\u003e\n\u003ctd\u003e0.12 sec \/ 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRotation Angle\u003c\/td\u003e\n\u003ctd\u003e0 – 180°\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e9 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (L×W×H)\u003c\/td\u003e\n\u003ctd\u003e23.1 × 12.2 × 28.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMiniature robotic arm with 3–4 servos for precise joint movement\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-servo-pan-tilt-mount\"\u003ePan‑tilt camera mount for object tracking using OpenCV\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/automatic-pet-feeder-kit-ai-object-detection-and-4-dof-servo-arm\"\u003eAutomatic pet feeder with timed dispensing lid\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/arduino-solar-tracker-kit-with-ldr-sensors-and-servos-track-the-sun\"\u003eSolar tracker that follows the sun for small photovoltaic panels\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe SG90 works seamlessly with any microcontroller that supports PWM output, such as Arduino Uno, Nano, Raspberry Pi (with external power), ESP32, and STM32. Its logic signal is 5V‑tolerant, and the servo can be powered directly from a 5V rail if current draw is limited. For multiple servos, pair with a dedicated servo driver like PCA9685 or an external 5–6V supply.\u003c\/p\u003e\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect the brown wire to GND, red to 5V (or 4.8–6V external supply), and the orange\/yellow signal wire to any PWM‑capable GPIO pin. Use a 100–470 µF decoupling capacitor across the power rails if you notice jitter. Never power more than two servos directly from an Arduino’s 5V regulator – use a separate battery or DC adapter.\u003c\/p\u003e\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-7 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino?\u003c\/summary\u003e\u003cp\u003eYes, the SG90 works directly with the Arduino Servo library. Just connect the signal wire to a PWM pin (e.g., D9) and upload a sweep sketch.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the torque at 6V?\u003c\/summary\u003e\u003cp\u003eAt 6V input, the stall torque increases to approximately 1.8 kg·cm, providing a noticeable boost for heavier loads.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan this servo rotate 360°?\u003c\/summary\u003e\u003cp\u003eOut of the box, the SG90 is limited to 180° by a mechanical stop. Continuous rotation requires internal modification (removing the potentiometer stop and disconnecting the feedback potentiometer).\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445045125485,"sku":"CDN-0852","price":99.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/sg90-servo-motor-9g-micro-servo-for-robotics-arduino-8306005.jpg?v=1790779807"},{"product_id":"mg996r-servo-high-torque-metal-gear-digital-servo","title":"MG996R Servo - High Torque Metal Gear Digital Servo","description":"\u003ch1\u003eMG996R Servo - High Torque Metal Gear Digital Servo\u003c\/h1\u003e\n\n\u003cp\u003eThe MG996R is a high-torque digital servo motor with metal gears, delivering up to 11 kg·cm of torque at 6V. It is widely used in robotics, RC vehicles, and automated systems requiring precise angular control. Its robust construction ensures durability under demanding loads.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e4.8V - 6.6V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStall Torque (4.8V)\u003c\/td\u003e\n\u003ctd\u003e9.4 kg·cm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStall Torque (6V)\u003c\/td\u003e\n\u003ctd\u003e11 kg·cm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Speed (4.8V)\u003c\/td\u003e\n\u003ctd\u003e0.17 sec\/60°\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Speed (6V)\u003c\/td\u003e\n\u003ctd\u003e0.14 sec\/60°\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e55 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e40.7 x 19.7 x 42.9 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGear Material\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRotation Range\u003c\/td\u003e\n\u003ctd\u003e0° - 180°\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRobotic arm with multiple joints for precise manipulation\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-servo-pan-tilt-mount\"\u003ePan-tilt camera mount for real-time tracking\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003eSteering mechanism for an RC car or boat\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-servo-door-lock\"\u003eAutomated door lock system with angle control\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis servo works with any microcontroller or board that outputs a PWM signal, including Arduino Uno, Mega, Nano, Raspberry Pi, ESP32, and STM32. It expects a standard 50 Hz servo signal (500-2500 µs pulse). For heavy loads, provide an external 5-6V power supply, as the servo can draw up to 2.5A at stall.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect the signal wire (usually yellow\/orange) to a PWM-capable pin, the power wire (red) to an external 5-6V supply, and the ground (brown\/black) to common ground with your microcontroller. Avoid powering directly from a board's 5V pin—a separate supply prevents voltage drops and resets.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-7 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino Uno?\u003c\/summary\u003e\u003cp\u003eYes, connect the signal wire to any PWM pin (e.g., D9) and use the Servo library. Provide an external 5V supply for the servo to avoid overloading the Arduino's regulator.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat power supply do I need?\u003c\/summary\u003e\u003cp\u003eA 5V 2A DC adapter or bench supply is recommended, especially when using multiple servos. At stall, the MG996R can draw 2.5A, so ensure your supply can handle peak current.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it rotate continuously?\u003c\/summary\u003e\u003cp\u003eNo, the MG996R has a fixed 180° range. For continuous rotation, consider a modified servo or a stepper motor. This servo is designed for precise angular positioning.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445049418093,"sku":"CDN-0861","price":710.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/mg996r-servo-high-torque-metal-gear-digital-servo-2925385.jpg?v=1790779748"},{"product_id":"mg90s-metal-gear-micro-servo-18kg-cm-torque","title":"MG90S Metal Gear Micro Servo - 1.8kg-cm Torque","description":"\u003ch1\u003eMG90S Metal Gear Micro Servo – 1.8kg-cm Torque\u003c\/h1\u003e\n\n\u003cp\u003eThe MG90S is a micro servo motor with metal gears, offering improved durability over the common SG90. It operates at 4.8-6V, delivering up to 1.8 kg-cm of torque, making it suitable for small robotics, RC vehicles, and animatronics. This servo features a compact design and smooth rotation, ideal for applications where size and weight are constraints.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e4.8V – 6.0V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStall Torque (4.8V)\u003c\/td\u003e\n\u003ctd\u003e1.8 kg-cm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSpeed (4.8V, no load)\u003c\/td\u003e\n\u003ctd\u003e0.10 sec \/ 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGear Material\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e13.4 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e22.8 x 12.2 x 28.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eArduino-based robotic arm with precise grip control\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-servo-pan-tilt-mount\"\u003ePan-tilt camera mount for object tracking\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003eRC airplane control surfaces (rudder, elevator, aileron)\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/automatic-pet-feeder-kit-ai-object-detection-and-4-dof-servo-arm\"\u003eAutomatic pet feeder flap mechanism\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis servo works with any microcontroller or servo driver that outputs a standard PWM signal, including Arduino Uno, ESP32, and Raspberry Pi (with external power). It's commonly paired with the PCA9685 servo driver for multi-servo projects. Draws peak current around 700mA at stall, so an external 5V supply is recommended when using multiple servos.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect the brown wire to ground, red to 4.8-6V power, and orange to the PWM signal pin. Avoid powering it directly from the Arduino 5V pin for more than one servo; use a separate power source. A 100μF capacitor across the power lines helps reduce voltage spikes.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-7 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino Uno?\u003c\/summary\u003e\u003cp\u003eYes, it uses the standard Servo library. Just connect the signal wire to any digital pin and power externally if using multiple servos.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it rotate 360 degrees?\u003c\/summary\u003e\u003cp\u003eNo, this is a standard 180-degree positional servo. For continuous rotation, you would need a different model or modification.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it include mounting screws and horns?\u003c\/summary\u003e\u003cp\u003eYes, each servo comes with a set of plastic horns and mounting screws.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445060919661,"sku":"CDN-0889","price":150.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/mg90s-metal-gear-micro-servo-18kg-cm-torque-5600587.jpg?v=1790779747"},{"product_id":"towerpro-mg945-digital-high-speed-servo-motor-360-degree","title":"TowerPro MG945 Digital High Speed Servo Motor 360 Degree","description":"\u003ch1\u003eTowerPro MG945 Digital High Speed Servo Motor 360 Degree\u003c\/h1\u003e\n\nThe TowerPro MG945 is a digital high-speed servo motor designed for continuous 360-degree rotation. It delivers robust torque and rapid response, making it a reliable choice for robotics, automation, and motion control projects.\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 4.8V – 7.2V\u003c\/li\u003e\n\u003cli\u003eStall Torque: 12 kg·cm at 6V\u003c\/li\u003e\n\u003cli\u003eOperating Speed: 0.17 sec\/60° at 6V\u003c\/li\u003e\n\u003cli\u003eRotation Range: 360° continuous\u003c\/li\u003e\n\u003cli\u003eMotor Type: Digital coreless\u003c\/li\u003e\n\u003cli\u003eGear Type: Metal gears\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.8 x 20.1 x 38 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 55 g\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin (signal, VCC, GND)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Mega, Nano)\u003c\/li\u003e\n\u003cli\u003eESP32 and ESP8266\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi (via PWM or servo driver)\u003c\/li\u003e\n\u003cli\u003eSTM32 microcontrollers\u003c\/li\u003e\n\u003cli\u003ePCA9685 servo driver boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eContinuous rotation robotic arms and grippers\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mounts for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eAutomated conveyor belt or wheel systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\nEvery TowerPro MG945 comes with access to our AI build companion, delivered via QR code, email, or WhatsApp, to help you wire and program this servo into a working project. With 10 years of experience supplying makers and institutions across India, we ensure you get genuine parts and reliable support. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between this 360-degree servo and a standard servo?\u003c\/summary\u003e\nA standard servo rotates 0–180 degrees, while this MG945 rotates continuously in both directions. It is ideal for applications requiring full rotation, such as wheels or conveyor belts.\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for TowerPro MG945 Servo Motor?\u003c\/summary\u003e\nYou can pay using UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order. All options are available across India.\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\nWe ship TowerPro MG945 Servo Motor across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eCan I use this servo with an Arduino?\u003c\/summary\u003e\nYes, it works directly with Arduino boards using the Servo library. Connect the signal wire to a PWM-capable pin, VCC to 5V, and GND to ground.\n\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492650180973,"sku":"CDN-2306","price":518.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg945-digital-high-speed-servo-motor-360-degree-1169436.jpg?v=1785259512"},{"product_id":"waveshare-20kg-cm-bus-servo-motor-106prm-high-speed-large-torque-with-360-degrees-high-precision-magnetic-encoder","title":"Waveshare ST3215-HS 20kg.cm Bus Servo Motor, 106 RPM, 360° Magnetic Encoder","description":"\u003ch1\u003eWaveshare 20kg.cm Bus Servo Motor, 106RPM High Speed, Large Torque, With 360 Degrees High Precision Magnetic Encoder\u003c\/h1\u003e\n\nThe Waveshare 20kg.cm Bus Servo Motor delivers 106 RPM speed and 20 kg·cm torque, featuring a 360-degree high-precision magnetic encoder for continuous feedback. This industrial-grade servo is built for professional roboticists, automation engineers, and control system designers who need reliable, high-torque actuation in demanding projects.\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTorque: up to 20 kg·cm (at 12V)\u003c\/li\u003e\n\u003cli\u003eSpeed: 106 RPM, 0.094 s\/60° (at 12V)\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 6–12.6V (2S or 3S Li-ion\/LiPo)\u003c\/li\u003e\n\u003cli\u003eControl interface: Bus (serial protocol)\u003c\/li\u003e\n\u003cli\u003eFeedback: 360° high-precision magnetic encoder\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 20 x 40.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 60 g\u003c\/li\u003e\n\u003cli\u003eGear material: Metal\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20°C to 60°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Mega, Due)\u003c\/li\u003e\n\u003cli\u003eESP32 \/ ESP8266\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi (via UART)\u003c\/li\u003e\n\u003cli\u003eSTM32\u003c\/li\u003e\n\u003cli\u003eWaveshare servo controller boards\u003c\/li\u003e\n\u003cli\u003eAny microcontroller with serial communication capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arm joints requiring high torque and precise position feedback\u003c\/li\u003e\n\u003cli\u003eAutomated turntables or pan-tilt mechanisms for camera tracking\u003c\/li\u003e\n\u003cli\u003eIndustrial conveyor belt diverters or pick-and-place actuators\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt and Backed by Compoden\u003c\/h3\u003e\n\u003cp\u003eEvery Waveshare servo motor from Compoden includes free access to our AI build companion — delivered via QR code, email, or WhatsApp — that helps you wire, configure, and program this motor into a working project. With 10 years of experience supplying makers and institutions across India, we ensure you get genuine parts and reliable support. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the communication protocol for this servo motor?\u003c\/summary\u003e\n\u003cp\u003eThis servo uses a bus serial protocol (typically half-duplex UART) for daisy-chaining multiple motors on a single line. Refer to the Waveshare datasheet for exact command set and baud rate.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for Waveshare 20kg.cm Bus Servo Motor?\u003c\/summary\u003e\n\u003cp\u003eYou can pay via UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order. All payment methods are available across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship Waveshare 20kg.cm Bus Servo Motor across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Standard delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53492650213741,"sku":"CDN-2324","price":3512.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/waveshare-20kgcm-bus-servo-motor-106prm-high-speed-large-torque-with-360-degrees-high-precision-magnetic-encoder-8566019.jpg?v=1785259512"},{"product_id":"waveshare-40kg-cm-metal-serial-bus-servo-high-precision-and-large-torque-with-programmable-360-degrees-magnetic-encoder-and-brushless-motor","title":"Waveshare 40kg.cm Metal Serial Bus Servo, High Precision And Large Torque, With Programmable 360 Degrees Magnetic Encoder and Brushless Motor","description":"\u003ch1\u003eWaveshare 40kg.cm Metal Serial Bus Servo\u003c\/h1\u003e\n\u003cp\u003eThis Waveshare 40kg.cm Metal Serial Bus Servo delivers high precision and large torque for demanding robotics projects. It features a programmable 360-degree magnetic encoder and a brushless motor, making it ideal for engineers, makers, and institutions building advanced motion systems.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTorque: 40 kg.cm\u003c\/li\u003e\n\u003cli\u003eMotor type: Brushless\u003c\/li\u003e\n\u003cli\u003eEncoder: Programmable 360-degree magnetic encoder\u003c\/li\u003e\n\u003cli\u003eInterface: Serial bus (TTL)\u003c\/li\u003e\n\u003cli\u003eControl: Position, speed, and current control\u003c\/li\u003e\n\u003cli\u003eFeedback: Real-time position, speed, and temperature\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 7–12 V\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 20 x 40.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 67 g\u003c\/li\u003e\n\u003cli\u003eGear material: Metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Mega, Due)\u003c\/li\u003e\n\u003cli\u003eESP32\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi (via UART)\u003c\/li\u003e\n\u003cli\u003eSTM32\u003c\/li\u003e\n\u003cli\u003eAny microcontroller with TTL serial interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arms and manipulators requiring precise joint control\u003c\/li\u003e\n\u003cli\u003eHumanoid or bipedal walking robots\u003c\/li\u003e\n\u003cli\u003eAutomated pan-tilt systems for cameras or sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery Waveshare servo comes with access to our AI build companion — delivered via QR, email, or WhatsApp — that helps you wire, configure, and program this servo into a working project. With 10 years of experience supplying makers and institutions across India, we ensure you get the support you need. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the operating voltage for this servo?\u003c\/summary\u003e\n\u003cp\u003eThe Waveshare 40kg.cm Metal Serial Bus Servo operates on 7–12 V DC.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for the Waveshare 40kg.cm Metal Serial Bus Servo?\u003c\/summary\u003e\n\u003cp\u003eYou can pay using UPI, debit\/credit cards, or Cash on Delivery (COD) if checkout offers it for your order. These options are available across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship the Waveshare 40kg.cm Metal Serial Bus Servo across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":53492650475885,"sku":"CDN-2325","price":10817.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/waveshare-40kgcm-metal-serial-bus-servo-high-precision-and-large-torque-with-programmable-360-degrees-magnetic-encoder-and-brushless-motor-7359621.jpg?v=1785259512"},{"product_id":"towerpro-mg995-plastic-gear-servo-motor-with-cnc-aluminum-steering-servo-horn-arm","title":"TowerPro MG995 Plastic Gear Servo Motor with CNC Aluminum Steering Servo Horn Arm","description":"\u003ch1\u003eTowerPro MG995 Plastic Gear Servo Motor with CNC Aluminum Steering Servo Horn Arm\u003c\/h1\u003e\n\nThe TowerPro MG995 is a high-torque plastic gear servo motor that delivers reliable 180° rotation for robotics and automation projects. It comes with a CNC aluminum steering servo horn arm for added durability and precision. This motor is ideal for hobbyists, students, and engineers building motion-controlled systems.\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.8V – 7.2V\u003c\/li\u003e\n\u003cli\u003eStall torque: 10 kg-cm at 6V\u003c\/li\u003e\n\u003cli\u003eOperating speed: 0.20 sec\/60° at 4.8V, 0.16 sec\/60° at 6V\u003c\/li\u003e\n\u003cli\u003eRotation range: 180°\u003c\/li\u003e\n\u003cli\u003eGear type: Plastic\u003c\/li\u003e\n\u003cli\u003eIncluded accessory: CNC aluminum steering servo horn arm\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.7 x 19.7 x 42.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 55 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Mega, Nano)\u003c\/li\u003e\n\u003cli\u003eESP32\u003c\/li\u003e\n\u003cli\u003eESP8266\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eSTM32\u003c\/li\u003e\n\u003cli\u003ePIC microcontrollers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arm with precise joint movement\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mount for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eRemote-controlled vehicle steering mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eWith 10 years of experience supplying makers and institutions across India, Compoden ensures every component is ready for your project. When you buy this servo, you get access to an AI build companion delivered via QR, email, or WhatsApp that helps you wire and program it into a working build. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the operating voltage range of the MG995 servo?\u003c\/summary\u003e\n\u003cp\u003eThe MG995 operates between 4.8V and 7.2V. At 6V, it delivers 10 kg-cm of stall torque.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for the TowerPro MG995 servo?\u003c\/summary\u003e\n\u003cp\u003eYou can pay using UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take and where do you ship?\u003c\/summary\u003e\n\u003cp\u003eWe ship the TowerPro MG995 servo across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492650508653,"sku":"CDN-2311","price":388.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg995-plastic-gear-servo-motor-with-cnc-aluminum-steering-servo-horn-arm-8468937.jpg?v=1785259512"},{"product_id":"towerpro-mg996r-digital-high-torque-servo-motor-360-rotation","title":"TowerPro MG996R Digital High Torque Servo Motor (360° Rotation)","description":"\u003ch1\u003eTowerPro MG996R Digital High Torque Servo Motor (360° Rotation)\u003c\/h1\u003e\n\nThe TowerPro MG996R is a digital high-torque servo motor capable of continuous 360° rotation. It is designed for robotics, automation, and mechanical projects requiring precise and powerful rotational movement.\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.8V – 7.2V\u003c\/li\u003e\n\u003cli\u003eStall torque: 10 kg·cm (4.8V) \/ 12 kg·cm (6V)\u003c\/li\u003e\n\u003cli\u003eOperating speed: 0.20 sec\/60° (4.8V) \/ 0.17 sec\/60° (6V)\u003c\/li\u003e\n\u003cli\u003eRotation: 360° continuous\u003c\/li\u003e\n\u003cli\u003eMotor type: Digital coreless\u003c\/li\u003e\n\u003cli\u003eGear type: Metal gears\u003c\/li\u003e\n\u003cli\u003ePulse width range: 500–2500 µs\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.7 x 19.7 x 42.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 55 g\u003c\/li\u003e\n\u003cli\u003eWire length: 30 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Mega, Nano, etc.)\u003c\/li\u003e\n\u003cli\u003eESP32\u003c\/li\u003e\n\u003cli\u003eESP8266\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi\u003c\/li\u003e\n\u003cli\u003eSTM32\u003c\/li\u003e\n\u003cli\u003ePIC microcontrollers\u003c\/li\u003e\n\u003cli\u003eServo controller boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arms and grippers requiring continuous rotation\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mounts for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eAutomated door openers or conveyor belt systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eCompoden has been supplying electronics components to makers, schools, and engineering institutions across India for over 10 years. Every purchase includes access to our AI build companion — delivered via QR, email, or WhatsApp — that helps you wire and program this servo into a working project. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between the MG996R and standard servos?\u003c\/summary\u003e\n\u003cp\u003eThe MG996R is a digital servo with metal gears and higher torque compared to analog plastic-gear servos. It also supports continuous 360° rotation, unlike standard servos limited to 180°.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for the TowerPro MG996R?\u003c\/summary\u003e\n\u003cp\u003eYou can pay via UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order. All payment methods are available across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take and where do you ship?\u003c\/summary\u003e\n\u003cp\u003eWe ship the TowerPro MG996R across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492650672493,"sku":"CDN-2313","price":467.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg996r-digital-high-torque-servo-motor-360-rotation-4859070.png?v=1785259512"},{"product_id":"towerpro-mg995-servo-high-speed-digital-metal-gear-servo-motor-with-cnc-aluminum-steering-servo-horn-arm","title":"TowerPro MG995 Servo High-Speed Digital Metal Gear Servo Motor with CNC Aluminum Steering Servo Horn Arm- Good Quality","description":"\u003ch1\u003eTowerPro MG995 Servo High-Speed Digital Metal Gear Servo Motor with CNC Aluminum Steering Servo Horn Arm\u003c\/h1\u003e\n\nThe TowerPro MG995 is a high-speed digital servo motor with metal gears and a CNC aluminum steering horn arm. It delivers reliable torque and precise control for demanding robotics and RC applications.\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.8V – 7.2V\u003c\/li\u003e\n\u003cli\u003eStall torque: 10 kg·cm at 4.8V, 12 kg·cm at 6V\u003c\/li\u003e\n\u003cli\u003eOperating speed: 0.20 sec\/60° at 4.8V, 0.16 sec\/60° at 6V\u003c\/li\u003e\n\u003cli\u003eControl system: Digital, PWM (pulse width modulation)\u003c\/li\u003e\n\u003cli\u003eGear type: Metal gears\u003c\/li\u003e\n\u003cli\u003eHorn arm: CNC aluminum steering horn included\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.7 x 19.7 x 42.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 55 g\u003c\/li\u003e\n\u003cli\u003eWire length: 30 cm\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin female (signal, VCC, GND)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Mega, Nano, etc.)\u003c\/li\u003e\n\u003cli\u003eESP32, ESP8266\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi (via GPIO or PWM hat)\u003c\/li\u003e\n\u003cli\u003eSTM32, PIC, AVR microcontrollers\u003c\/li\u003e\n\u003cli\u003eRC receivers and servo controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arm or gripper with precise joint movement\u003c\/li\u003e\n\u003cli\u003eRC car or boat steering mechanism\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mount for surveillance or tracking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery TowerPro MG995 servo comes with access to our AI build companion — delivered via QR, email, or WhatsApp — that helps you wire and program this part into a working project. With 10 years of experience supplying makers and institutions across India, we ensure you get genuine components and reliable support. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the operating voltage of the TowerPro MG995 servo?\u003c\/summary\u003e\n\u003cp\u003eThe MG995 operates between 4.8V and 7.2V. At 6V, it delivers 12 kg·cm torque and 0.16 sec\/60° speed.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for TowerPro MG995 Servo?\u003c\/summary\u003e\n\u003cp\u003eYou can pay via UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order. All options are available across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take and where do you ship?\u003c\/summary\u003e\n\u003cp\u003eWe ship TowerPro MG995 Servo across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492650705261,"sku":"CDN-2312","price":503.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg995-servo-high-speed-digital-metal-gear-servo-motor-with-cnc-aluminum-steering-servo-horn-arm-good-quality-6326575.jpg?v=1785259512"},{"product_id":"towerpro-mg995-metal-gear-servo-motor-360-continuous-rotation","title":"TowerPro MG995 Metal Gear Servo Motor (360° Continuous Rotation)","description":"\u003ch1\u003eTowerPro MG995 Metal Gear Servo Motor (360° Continuous Rotation)\u003c\/h1\u003e\n\n\u003cp\u003eThe TowerPro MG995 is a high-torque metal gear servo motor modified for 360° continuous rotation. It is designed for robotics and automation projects where full rotational motion is required, rather than standard position control. This servo is suitable for makers, students, and engineers building wheeled robots, pan-tilt mechanisms, or winch systems.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.8V – 7.2V\u003c\/li\u003e\n\u003cli\u003eStall torque: 10 kg·cm (at 6V)\u003c\/li\u003e\n\u003cli\u003eOperating speed: 0.20 sec\/60° (at 6V, no load)\u003c\/li\u003e\n\u003cli\u003eRotation: 360° continuous (modified0°)\u003c\/li\u003e\n\u003cli\u003eGear type: Metal gears (all metal)\u003c\/li\u003e\n\u003cli\u003eMotor type: Coreless DC motor\u003c\/li\u003e\n\u003cli\u003eControl signal: PWM (standard servo protocol, 50 Hz)\u003c\/li\u003e\n\u003cli\u003ePulse width range: 500–2500 µs (typical for continuous rotation)\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.7 x 19.7 x 42.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 55 g\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin female header (signal, VCC, GND)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Mega, Nano, etc.)\u003c\/li\u003e\n\u003cli\u003eESP32 and ESP8266\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi (via GPIO or PWM hat)\u003c\/li\u003e\n\u003cli\u003eSTM32 boards\u003c\/li\u003e\n\u003cli\u003ePWM servo controllers (PCA9685, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDifferential-drive robot chassis for line-following or obstacle avoidance\u003c\/li\u003e\n\u003cli\u003eContinuous pan-tilt camera mount for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eWinch or reel mechanism for cable management or lifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery TowerPro MG995 servo comes with access to our AI build companion, delivered via QR code, email, or WhatsApp, to help you wire and program this part into a working project. With 10 years of experience supplying makers, schools, and engineering institutions across India, we ensure you get genuine parts and reliable support. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between this 360° servo and a standard servo?\u003c\/summary\u003e\n\u003cp\u003eThis MG995 has been modified for continuous rotation. It does not hold a fixed angular position like a standard servo. Instead, it rotates continuously in either direction based on the PWM signal. Use it for wheels or winches, not for precise angle control.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I control the direction and speed of this servo?\u003c\/summary\u003e\n\u003cp\u003eSend a 50 Hz PWM signal. A pulse width of ~1500 µs stops the motor. Pulses shorter than 1500 µs rotate one direction, longer pulses rotate the opposite direction. The further from 1500 µs, the faster the rotation. Use the Servo library on Arduino or similar on other platforms.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for TowerPro MG995?\u003c\/summary\u003e\n\u003cp\u003eWe accept UPI, credit\/debit cards, and Cash on Delivery (COD) if checkout offers it for your order.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship TowerPro MG995 across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492654506349,"sku":"CDN-2308","price":461.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg995-metal-gear-servo-motor-360-continuous-rotation-7333619.jpg?v=1785259511"},{"product_id":"towerpro-mg995-metal-gear-servo-motor-90-rotation","title":"TowerPro MG995 Metal Gear Servo Motor (90° Rotation)-Good Quality","description":"\u003ch1\u003eTowerPro MG995 Metal Gear Servo Motor (90° Rotation)\u003c\/h1\u003e\n\nThe TowerPro MG995 is a high-torque metal gear servo motor with 90° rotation, designed for precise angular control in robotics, RC vehicles, and automation projects. Ideal for makers, hobbyists, and engineering students requiring reliable, durable actuation.\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.8V – 7.2V\u003c\/li\u003e\n\u003cli\u003eStall torque: 8.5 kg·cm at 6V\u003c\/li\u003e\n\u003cli\u003eRotation range: 90° (limited)\u003c\/li\u003e\n\u003cli\u003eGear type: Metal gears\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.7 x 19.7 x 42.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 55 g\u003c\/li\u003e\n\u003cli\u003eWire length: 30 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino Uno, Mega, Nano\u003c\/li\u003e\n\u003cli\u003eESP32, ESP8266\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi (via PWM)\u003c\/li\u003e\n\u003cli\u003eSTM32\u003c\/li\u003e\n\u003cli\u003eRC receivers and servo controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arm joints with precise 90° positioning\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mounts for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eRC car steering or boat rudder control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery TowerPro MG995 servo includes free access to our AI build companion — delivered via QR, email, or WhatsApp — to help you wire and program it into a working project. With 10 years of experience supplying makers and institutions across India, Compoden ensures you get genuine parts and reliable support. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the operating voltage range of the MG995?\u003c\/summary\u003e\n\u003cp\u003eThe MG995 operates between 4.8V and 7.2V. At 6V, it delivers 8.5 kg·cm of stall torque.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for the TowerPro MG995 Servo Motor?\u003c\/summary\u003e\n\u003cp\u003eYou can pay via UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship the TowerPro MG995 across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492654539117,"sku":"CDN-2309","price":427.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg995-metal-gear-servo-motor-90-rotation-good-quality-5256635.jpg?v=1785259511"},{"product_id":"towerpro-mg90s-mini-digital-servo-motor-180-rotation","title":"TowerPro MG90S Mini Digital Servo Motor (180° Rotation)-Standard Quality","description":"\u003ch1\u003eTowerPro MG90S Mini Digital Servo Motor (180° Rotation) - Standard Quality\u003c\/h1\u003e\n\u003cp\u003eThe TowerPro MG90S is a compact, high-performance mini digital servo motor with 180° rotation. It is designed for precision control in small-scale robotics, RC vehicles, and automation projects where space and weight are limited.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.8V to 6.0V\u003c\/li\u003e\n\u003cli\u003eStall torque: 1.8 kg·cm at 4.8V, 2.2 kg·cm at 6.0V\u003c\/li\u003e\n\u003cli\u003eOperating speed: 0.10 sec\/60° at 4.8V, 0.08 sec\/60° at 6.0V\u003c\/li\u003e\n\u003cli\u003eRotation angle: 180°\u003c\/li\u003e\n\u003cli\u003eGear type: Metal gears\u003c\/li\u003e\n\u003cli\u003eMotor type: Coreless DC motor\u003c\/li\u003e\n\u003cli\u003eDimensions: 23 x 12.2 x 29 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 13.6 g\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin (signal, VCC, GND)\u003c\/li\u003e\n\u003cli\u003ePulse width range: 500 to 2500 µs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cp\u003eArduino Uno, Nano, Mega, ESP32, ESP8266, Raspberry Pi (via GPIO), STM32, and any microcontroller or RC receiver supporting standard servo PWM signals.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arm joints for small pick-and-place or educational robots\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mount for surveillance or tracking systems\u003c\/li\u003e\n\u003cli\u003eSteering mechanism for mini RC cars or boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery TowerPro MG90S servo motor ships with access to our AI build companion, delivered via QR code, email, or WhatsApp, to help you wire and program it into a working project. With over 10 years of experience supplying makers and institutions across India, we ensure reliable components for your builds. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between MG90S and SG90 servo motors?\u003c\/summary\u003e\n\u003cp\u003eThe MG90S uses metal gears for higher torque and durability, while the SG90 uses plastic gears. The MG90S is better suited for applications requiring more strength and resistance to wear.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for TowerPro MG90S Mini Digital Servo Motor?\u003c\/summary\u003e\n\u003cp\u003eYou can pay using UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order. All payment methods are available across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship TowerPro MG90S Mini Digital Servo Motor across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eBuy TowerPro MG90S Mini Digital Servo Motor Online in India with UPI and cards, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492654702957,"sku":"CDN-2305","price":206.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg90s-mini-digital-servo-motor-180-rotation-standard-quality-5865420.jpg?v=1785259511"},{"product_id":"towerpro-mg995-metal-gear-servo-motor-180-rotation","title":"TowerPro MG995 Metal Gear Servo Motor (180° Rotation)-Good Quality","description":"\u003ch1\u003eTowerPro MG995 Metal Gear Servo Motor (180° Rotation)\u003c\/h1\u003e\n\u003cp\u003eThe TowerPro MG995 is a high-torque metal gear servo motor offering 180° rotation. It is designed for demanding applications in robotics, RC vehicles, and automation projects where durability and precision are required.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 4.8V – 7.2V\u003c\/li\u003e\n\u003cli\u003eStall Torque: 10 kg·cm (at 6V)\u003c\/li\u003e\n\u003cli\u003eOperating Speed: 0.20 sec\/60° (at 4.8V), 0.16 sec\/60° (at 6V)\u003c\/li\u003e\n\u003cli\u003eRotation Range: 180°\u003c\/li\u003e\n\u003cli\u003eGear Type: Metal gears\u003c\/li\u003e\n\u003cli\u003eMotor Type: Coreless\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.7 x 19.7 x 42.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 55 g\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin (Signal, VCC, GND)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Mega, Nano, etc.)\u003c\/li\u003e\n\u003cli\u003eESP32 and ESP8266\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi (via GPIO or PWM controller)\u003c\/li\u003e\n\u003cli\u003eSTM32 microcontrollers\u003c\/li\u003e\n\u003cli\u003eRC receivers and servo controllers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arm or gripper for pick-and-place tasks\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mount for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eSteering mechanism for RC cars or boats\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery TowerPro MG995 servo you buy from Compoden comes with access to our AI build companion — delivered via QR code, email, or WhatsApp — that helps you wire and program this part into a working project. With 10 years of experience supplying makers and institutions across India, we ensure you get genuine components and reliable support. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the operating voltage of the TowerPro MG995?\u003c\/summary\u003e\n\u003cp\u003eThe MG995 operates between 4.8V and 7.2V. At 6V, it delivers 10 kg·cm of torque.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for the TowerPro MG995?\u003c\/summary\u003e\n\u003cp\u003eYou can pay using UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order. All options are available across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship the TowerPro MG995 across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eBuy TowerPro MG995 Metal Gear Servo Motor online in India with UPI and cards, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492654932333,"sku":"CDN-2307","price":458.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg995-metal-gear-servo-motor-180-rotation-good-quality-8208316.jpg?v=1785259511"},{"product_id":"towerpro-sg90-continuous-rotation-360-degree-servo-motor","title":"TowerPro SG90 Continuous Rotation 360 Degree Servo Motor","description":"\u003ch1\u003eTowerPro SG90 Continuous Rotation 360 Degree Servo Motor\u003c\/h1\u003e\n\n\u003cp\u003eThe TowerPro SG90 Continuous Rotation 360 Degree Servo Motor is a modified version of the standard SG90 servo, designed for continuous rotation instead of limited-angle movement. It is ideal for robotics projects requiring wheel drive, tank treads, or endless rotation mechanisms.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 4.8V to 6V\u003c\/li\u003e\n\u003cli\u003eStall Torque: 1.8 kg-cm at 4.8V\u003c\/li\u003e\n\u003cli\u003eSpeed: 0.1 sec\/60° at 4.8V (no load)\u003c\/li\u003e\n\u003cli\u003eRotation: Continuous 360 degrees (modified for endless rotation)\u003c\/li\u003e\n\u003cli\u003eControl Signal: Standard PWM (50 Hz, 1-2 ms pulse width)\u003c\/li\u003e\n\u003cli\u003eWeight: 9 grams\u003c\/li\u003e\n\u003cli\u003eDimensions: 23 x 12.2 x 29 mm\u003c\/li\u003e\n\u003cli\u003eGear Type: Plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cp\u003eArduino Uno, Arduino Nano, Arduino Mega, ESP32, ESP8266, Raspberry Pi (via PWM or servo driver), STM32, and any microcontroller generating a 50 Hz PWM signal.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobot drive base — use two continuous rotation servos for differential steering\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mount — continuous rotation allows 360-degree scanning\u003c\/li\u003e\n\u003cli\u003eConveyor belt or winch mechanism — endless rotation for linear motion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery TowerPro SG90 Continuous Rotation Servo Motor comes with access to our AI build companion, delivered via QR code, email, or WhatsApp. It helps you wire and program this motor into a working project step-by-step. With 10 years of experience supplying makers and institutions across India, Compoden ensures you get genuine parts and reliable support.\u003c\/p\u003e\n\u003cp\u003ePay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between a standard SG90 and a continuous rotation SG90?\u003c\/summary\u003e\n\u003cp\u003eA standard SG90 rotates only 0–180 degrees. The continuous rotation version has been modified to spin endlessly in either direction, controlled by the PWM pulse width (1 ms = full speed one way, 1.5 ms = stop, 2 ms = full speed opposite).\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for the TowerPro SG90 Continuous Rotation Servo Motor?\u003c\/summary\u003e\n\u003cp\u003eYou can pay via UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order. All options are available across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship the TowerPro SG90 Continuous Rotation Servo Motor across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492654965101,"sku":"CDN-2314","price":188.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-sg90-continuous-rotation-360-degree-servo-motor-8019410.jpg?v=1785259511"},{"product_id":"towerpro-mg995-plastic-gear-servo-motor-180-rotation","title":"TowerPro MG995 Plastic Gear Servo Motor (180° Rotation)-Standard Quality","description":"\u003ch1\u003eTowerPro MG995 Plastic Gear Servo Motor (180° Rotation) - Standard Quality\u003c\/h1\u003e\n\u003cp\u003eThe TowerPro MG995 is a standard-quality plastic gear servo motor offering 180° rotation. It is designed for hobby robotics, RC models, and educational projects where moderate torque and reliable positioning are needed.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 4.8V - 6V\u003c\/li\u003e\n\u003cli\u003eStall Torque: 8.5 kg·cm (at 6V)\u003c\/li\u003e\n\u003cli\u003eRotation Angle: 180°\u003c\/li\u003e\n\u003cli\u003eGear Type: Plastic\u003c\/li\u003e\n\u003cli\u003eSpeed: 0.20 sec\/60° (at 4.8V)\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.7 x 19.7 x 42.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 55 g\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin (Signal, VCC, GND)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cp\u003eArduino Uno, Arduino Mega, ESP32, ESP8266, Raspberry Pi, STM32, and most servo controllers.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arms and grippers for pick-and-place tasks\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mounts for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eRC car steering and throttle control systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEach TowerPro MG995 servo motor comes with access to our AI build companion, delivered via QR code, email, or WhatsApp, to help you wire and program it into a working project. With 10 years of experience supplying makers and institutions across India, we ensure reliable components for your builds. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between plastic and metal gear servos?\u003c\/summary\u003e\n\u003cp\u003ePlastic gear servos like the MG995 are lighter and quieter, but less durable under high torque or shock loads. They are ideal for lightweight hobby projects.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for TowerPro MG995 servo motor?\u003c\/summary\u003e\n\u003cp\u003eWe accept UPI, debit\/credit cards, and Cash on Delivery (COD) if checkout offers it for your order.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship TowerPro MG995 servo motor across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492655194477,"sku":"CDN-2310","price":337.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-mg995-plastic-gear-servo-motor-180-rotation-standard-quality-8276797.jpg?v=1785259511"},{"product_id":"towerpro-sg90-servo-motor-180-rotation","title":"TowerPro SG90 Servo Motor (180° Rotation)-Good Quality","description":"\u003ch1\u003eTowerPro SG90 Servo Motor (180° Rotation) – Good Quality\u003c\/h1\u003e\n\nThe TowerPro SG90 is a compact micro servo motor that rotates 180 degrees, ideal for precise angular positioning in small-scale robotics and automation projects. This good-quality variant is a reliable choice for makers, students, and hobbyists building with microcontrollers.\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.8V – 6V DC\u003c\/li\u003e\n\u003cli\u003eStall torque: 1.8 kg·cm (at 4.8V)\u003c\/li\u003e\n\u003cli\u003eRotation range: 0° – 180°\u003c\/li\u003e\n\u003cli\u003eControl signal: PWM (50 Hz, 1–2 ms pulse width)\u003c\/li\u003e\n\u003cli\u003eDead band width: 10 µs\u003c\/li\u003e\n\u003cli\u003eOperating speed: 0.1 sec \/ 60° (at 4.8V)\u003c\/li\u003e\n\u003cli\u003eDimensions: 23 x 12.2 x 29 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 grams\u003c\/li\u003e\n\u003cli\u003eGear type: Plastic\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin female header (signal, VCC, GND)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino (Uno, Nano, Mega, Leonardo)\u003c\/li\u003e\n\u003cli\u003eESP32 and ESP8266 boards\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi (via GPIO with PWM)\u003c\/li\u003e\n\u003cli\u003eSTM32 microcontrollers\u003c\/li\u003e\n\u003cli\u003ePIC and AVR development boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arm joints for pick-and-place mechanisms\u003c\/li\u003e\n\u003cli\u003ePan-and-tilt camera mounts for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eAnimated props or model aircraft control surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery TowerPro SG90 servo motor you buy from Compoden comes with access to our AI build companion — delivered via QR code, email, or WhatsApp — that guides you through wiring and programming this servo into a working project. With 10 years of experience supplying electronics to makers, schools, and engineering institutions across India, we ensure you get a good-quality component that performs as expected. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the difference between the SG90 and MG90S servo motors?\u003c\/summary\u003e\nThe SG90 uses plastic gears, while the MG90S uses metal gears. The SG90 is lighter and sufficient for light-duty projects; the MG90S is more durable for higher-torque applications.\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for TowerPro SG90 Servo Motor?\u003c\/summary\u003e\nWe accept UPI, all major credit and debit cards, and Cash on Delivery (COD) if checkout offers it for your order.\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take for this servo motor?\u003c\/summary\u003e\nWe ship the TowerPro SG90 Servo Motor across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/details\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492655260013,"sku":"CDN-2316","price":247.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-sg90-servo-motor-180-rotation-good-quality-9103769.jpg?v=1785259510"},{"product_id":"towerpro-sg90-mini-servo-180-degree-rotation","title":"TowerPro SG90 Mini Servo – 180 degree Rotation – Standard Quality","description":"\u003ch1\u003eTowerPro SG90 Mini Servo – 180 Degree Rotation – Standard Quality\u003c\/h1\u003e\n\u003cp\u003eThe TowerPro SG90 Mini Servo is a compact, standard-quality servo motor that rotates 180 degrees. It is ideal for hobbyists, students, and makers building small-scale robotics and automation projects.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating voltage: 4.8V – 6V\u003c\/li\u003e\n\u003cli\u003eRotation angle: 0° to 180°\u003c\/li\u003e\n\u003cli\u003eStall torque: 1.8 kg·cm (at 4.8V)\u003c\/li\u003e\n\u003cli\u003eOperating speed: 0.1 sec\/60° (at 4.8V)\u003c\/li\u003e\n\u003cli\u003eControl signal: PWM (50 Hz, 1–2 ms pulse width)\u003c\/li\u003e\n\u003cli\u003eDimensions: 23 x 12.2 x 29 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 g\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin (signal, VCC, GND)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible with\u003c\/h2\u003e\n\u003cp\u003eArduino Uno, Nano, Mega, ESP32, ESP8266, Raspberry Pi (via GPIO), STM32, and any microcontroller with PWM output.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you can build with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobotic arm or gripper for small pick-and-place tasks\u003c\/li\u003e\n\u003cli\u003ePan-tilt camera mount for surveillance or tracking\u003c\/li\u003e\n\u003cli\u003eAnimatronic prop or model car steering mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery TowerPro SG90 Mini Servo comes with access to our AI build companion — delivered via QR code, email, or WhatsApp — that helps you wire and program this servo into a working project. With 10 years of experience supplying makers and institutions across India, we ensure reliable components and support. Pay your way: UPI or cards anywhere in India, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is the operating voltage of the TowerPro SG90 Mini Servo?\u003c\/summary\u003e\n\u003cp\u003eIt operates between 4.8V and 6V. At 4.8V, it delivers 1.8 kg·cm of stall torque.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow do I control the servo angle?\u003c\/summary\u003e\n\u003cp\u003eSend a PWM signal at 50 Hz. A 1 ms pulse sets 0°, a 1.5 ms pulse sets 90°, and a 2 ms pulse sets 180°.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat payment options are available for the TowerPro SG90 Mini Servo?\u003c\/summary\u003e\n\u003cp\u003eYou can pay via UPI, credit\/debit cards, or Cash on Delivery (COD) if checkout offers it for your order. All options are available across India.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eHow long does delivery take?\u003c\/summary\u003e\n\u003cp\u003eWe ship the TowerPro SG90 Mini Servo across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Delivery takes 2-7 days after dispatch, depending on your location.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eBuy the TowerPro SG90 Mini Servo online in India with UPI and cards, plus COD if checkout offers it for your order.\u003c\/p\u003e\n\n","brand":"TowerPro","offers":[{"title":"Default Title","offer_id":53492658176365,"sku":"CDN-2315","price":130.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/towerpro-sg90-mini-servo-180-degree-rotation-standard-quality-1413471.jpg?v=1785259510"}],"url":"https:\/\/compoden.com\/collections\/servo-motors.oembed","provider":"Compoden","version":"1.0","type":"link"}