{"product_id":"a2212-10t13t-1000kv-brushless-drone-motor","title":"A2212 10T\/13T 1000KV Brushless Drone Motor","description":"\u003ch1\u003eA2212 1000KV Brushless Outrunner Motor for Drones\u003c\/h1\u003e\n\u003cp\u003eThe A2212 1000KV brushless DC motor is a reliable outrunner designed for multirotor and fixed-wing hobby aircraft. With a KV rating of 1000 RPM per volt, it strikes a balance between torque and speed, making it ideal for 8- to 10-inch propellers on 3S LiPo batteries. Its compact 22 mm stator diameter and 12 mm height keep weight low while maintaining efficiency.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eKV Rating\u003c\/td\u003e\n\u003ctd\u003e1000 RPM\/V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStator Size\u003c\/td\u003e\n\u003ctd\u003e22 x 12 mm (A2212)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Continuous Current\u003c\/td\u003e\n\u003ctd\u003e12 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended Propeller\u003c\/td\u003e\n\u003ctd\u003e10x4.5 on 3S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e7.4 – 12.6 V (2S – 3S)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShaft Diameter\u003c\/td\u003e\n\u003ctd\u003e3.17 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 50 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWinding Turns\u003c\/td\u003e\n\u003ctd\u003e10T \/ 13T variants (this is 10T)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eF450 or similar quadcopter frame with 10-inch props\u003c\/li\u003e\n  \u003cli\u003eTricopter with a tilt mechanism for yaw control\u003c\/li\u003e\n  \u003cli\u003eFixed-wing drone like the FT Explorer or simple delta wing\u003c\/li\u003e\n  \u003cli\u003eCustom camera gimbal with direct-drive motor control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThis motor mates with common 30 A SimonK or BLHeli ESCs using 3.5 mm bullet connectors. It works with any flight controller that outputs standard PWM signals, including Betaflight, ArduPilot, and KK2 boards. A 3S battery with at least 2200 mAh capacity and 30C discharge is recommended for stable flight.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eThe three motor wires connect in any order to the three ESC output pads; swapping any two reverses rotation. Ensure the bullet connectors are fully seated and insulated. No pull-up resistors are needed, but keep the ESC power and signal wires away from the motor bell to avoid interference.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino-based flight controllers?\u003c\/summary\u003e\u003cp\u003eYes, it works with any Arduino-compatible board that generates PWM signals, such as MultiWii or custom builds using the Servo library. Just ensure the ESC is properly calibrated.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use a 4S battery with this motor?\u003c\/summary\u003e\u003cp\u003eWhile physically possible, it is not recommended. On 4S, the motor will draw excessive current and overheat with 10-inch props. Use only 2S–3S within the rated voltage range.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the motor come with mounting screws and a propeller adapter?\u003c\/summary\u003e\u003cp\u003eThe motor includes an X-shaped mounting bracket and a collet-style prop adapter for 5 mm shafts. M3 screws for mounting are not included; use standard frame hardware.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445035753837,"sku":"CDN-0830","price":390.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_3fa65e6a-6b8d-41af-a8bb-75c19d65479d.jpg?v=1781512997","url":"https:\/\/compoden.com\/products\/a2212-10t13t-1000kv-brushless-drone-motor","provider":"Compoden","version":"1.0","type":"link"}