{"product_id":"kit-baby-room-comfort-monitor-kit-v19","title":"Baby Room Comfort Monitor Kit v19","description":"\u003ch1\u003eBaby Room Comfort Monitor Kit — Real-Time 60fps Display with Raspberry Pi Pico PIO\u003c\/h1\u003e\n\n\u003cp class=\"value-summary\"\u003eEvery part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.\u003c\/p\u003e\n\n\u003cdiv class=\"specs-strip\"\u003e\n  \u003cspan\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced\u003c\/span\u003e\n  \u003cspan\u003e\u003cstrong\u003eBuild Time:\u003c\/strong\u003e 5-6 hrs\u003c\/span\u003e\n  \u003cspan\u003e\u003cstrong\u003eAge:\u003c\/strong\u003e 18-21\u003c\/span\u003e\n  \u003cspan\u003e\u003cstrong\u003eSkill:\u003c\/strong\u003e PIO State Machine SPI\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eMonitor your infant’s room environment with a display that updates at full 60 frames per second — not the sluggish 10fps of conventional software drivers. By exploiting the Raspberry Pi Pico’s PIO peripheral to generate a hardware-accurate SPI bus at 62.5MHz, this kit pushes the ILI9341 TFT to its limits, rendering humidity, temperature, and motion data without perceptible lag. It’s a complete embedded systems project that turns a fragile, dependent baby-monitoring scenario into a responsive dashboard parents can trust.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You'll Build\u003c\/h2\u003e\n\u003cp\u003eYou assemble a compact comfort monitor that reads air temperature and humidity via the DHT22 and detects tilt or movement through the MPU6050 accelerometer\/gyroscope. All values stream onto a vivid 2.4‑inch color screen with instantaneous refresh, so you can see at a glance if the room is getting too warm, too damp, or if the baby’s cot has shifted. The entire circuit runs from a single Micro USB cable — mount it next to the crib or on the nursery wall.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You'll Learn\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eImplement hardware SPI with a PIO state machine on the Raspberry Pi Pico at 62.5MHz\u003c\/li\u003e\n  \u003cli\u003eDrive an ILI9341 TFT display using direct register writes for 60fps animation\u003c\/li\u003e\n  \u003cli\u003eRead one-wire DHT22 and I²C MPU6050 sensors in a real-time embedded loop\u003c\/li\u003e\n  \u003cli\u003eSolder surface-mount and through-hole components reliably on a PCB prototype board\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRaspberry Pi Pico\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2.4in TFT ILI9341\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDHT22\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMPU6050\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e4.7kΩ Resistors\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePCB Prototype Board\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMicro USB Cable\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSoldering Iron\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolder Wire\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Buy This Kit Instead of Sourcing Parts Separately\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFactor\u003c\/th\u003e\n\u003cth\u003eSourcing Separately\u003c\/th\u003e\n\u003cth\u003eCompoden Kit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatibility checks\u003c\/td\u003e\n\u003ctd\u003eYou verify every part\u003c\/td\u003e\n\u003ctd\u003ePre-tested as a system\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBuild support\u003c\/td\u003e\n\u003ctd\u003eForums and scattered tutorials\u003c\/td\u003e\n\u003ctd\u003eAI companion trained on this exact project\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTime to first working build\u003c\/td\u003e\n\u003ctd\u003eDays of debugging\u003c\/td\u003e\n\u003ctd\u003eHours, with step-by-step guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping coordination\u003c\/td\u003e\n\u003ctd\u003eMultiple sellers, multiple delays\u003c\/td\u003e\n\u003ctd\u003eOne shipment from Bengaluru in 3-5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Kit Is For\u003c\/h2\u003e\n\u003cp\u003eUndergraduate engineering students at IITs, NITs, VIT, or BITS Pilani who need a capstone embedded project; Smart India Hackathon teams prototyping infant health monitors; and ATL Tinkering Lab mentors who want an advanced soldering-and-PIO challenge. The build demands prior experience with C\/C++ and basic circuit assembly — it’s not a beginner-friendly kit.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat if I get stuck during the build?\u003c\/summary\u003e\u003cp\u003eOpen the AI companion through the QR code; it recognizes each step and offers immediate debug help. For hardware-level hangs, our WhatsApp support sees real-time photos and guides you through fixes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I achieve 60fps without the Pico’s PIO?\u003c\/summary\u003e\u003cp\u003eNo — standard software SPI on the Pico caps at about 10fps due to CPU overhead. The PIO state machine runs independently, generating the 62.5MHz clock needed to push full frames to the ILI9341 at 60Hz.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat if my DHT22 readings look inaccurate?\u003c\/summary\u003e\u003cp\u003eEnsure the 4.7kΩ pull‑up resistor is correctly placed between VCC and the data line. The AI companion includes a sensor verification routine that checks raw signals and suggests wiring fixes.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the soldering iron suitable for these tiny pads?\u003c\/summary\u003e\u003cp\u003eYes, the included iron has a fine chisel tip and temperature control suitable for both through-hole and small SMD pads on the ILI9341 breakout. We also include enough solder wire for the full project.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv class=\"kit-description\"\u003e\n  \u003cp\u003eInfant Care — Pico PIO state machine implements hardware SPI at 62.5MHz. Drives ILI9341 TFT at 60fps vs 10fps software.\u003c\/p\u003e\n  \u003ch4\u003eWhat's in this kit\u003c\/h4\u003e\n  \u003cul\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/raspberry-pi-pico-original-dual-core-arm-microcontroller-board\"\u003eRaspberry Pi Pico\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/elecrow-24inch-esp32-solo-miner-lcd-display\"\u003e2.4in TFT ILI9341\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/dht22-temperature-humidity-sensor-module-accurate-readings\"\u003eDHT22\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/mpu6050-imu-module-6-axis-gyro-accelerometer-for-arduino\"\u003eMPU6050\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\n\u003ca href=\"\/products\/resistor-variety-pack-100-pcs-10-values-14w-carbon-film\"\u003e4.7kΩ Resistors\u003c\/a\u003e x5\u003c\/li\u003e\n    \u003cli\u003e\n\u003ca href=\"\/products\/esp-wroom-32-breakout-board-pcb-55x52mm\"\u003ePCB Prototype Board\u003c\/a\u003e x2\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/microusb-cable-1m-charging-data-cord-for-arduino-android\"\u003eMicro USB Cable\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/soldering-kit-25w-with-solder-wire-flux-paste-compoden\"\u003eSoldering Iron\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/soldering-kit-25w-with-solder-wire-flux-paste-compoden\"\u003eSolder Wire\u003c\/a\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is included in the Baby Room Comfort Monitor Kit v19?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Baby Room Comfort Monitor Kit v19 includes all components needed: Raspberry Pi Pico, 2.4in TFT ILI9341, DHT22, MPU6050, 4.7kΩ Resistors and more. Everything is pre-tested for compatibility and shipped from Bengaluru, India.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What skill level is required for the Baby Room Comfort Monitor Kit v19?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This kit is designed for Advanced level makers, suitable for ages 18-21. Infant Care — Pico PIO state machine implements hardware SPI at 62.5MHz. Drives ILI9341 TFT at 60fps vs 10fps software. Estimated build time is 5-6 hrs.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I buy the Baby Room Comfort Monitor Kit v19 online in India?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, the Baby Room Comfort Monitor Kit v19 is available online at Compoden (compoden.in), India's AI-powered electronics and robotics store. Ships from Bengaluru in 1-5 business days across India.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"Product\",\n  \"name\": \"Baby Room Comfort Monitor Kit v19\",\n  \"description\": \"Infant Care — Pico PIO state machine implements hardware SPI at 62.5MHz. Drives ILI9341 TFT at 60fps vs 10fps software.\",\n  \"sku\": \"CDN-KIT-3986\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"Compoden\"},\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"url\": \"https:\/\/compoden.in\/products\/kit-baby-room-comfort-monitor-kit-v19\",\n    \"priceCurrency\": \"INR\",\n    \"price\": \"3810\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"seller\": {\"@type\": \"Organization\", \"name\": \"Compoden\"}\n  },\n  \"category\": \"Mini \u0026 Nano Form Factor\"\n}\n\u003c\/script\u003e\u003cp\u003e\u003cstrong\u003eChoose your assembly option:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering Kit\u003c\/strong\u003e — 25W soldering iron, 60\/40 solder wire, flux, and small perfboard for permanent assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreadboard Combo\u003c\/strong\u003e — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compoden","offers":[{"title":"Soldering Kit","offer_id":53463938433389,"sku":"CDN-KIT-3986-SLD","price":3120.0,"currency_code":"INR","in_stock":true},{"title":"Breadboard Combo","offer_id":53463938466157,"sku":"CDN-KIT-3986-BB","price":2580.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/kit-baby-room-comfort-monitor-kit-v19.png?v=1781949712","url":"https:\/\/compoden.com\/products\/kit-baby-room-comfort-monitor-kit-v19","provider":"Compoden","version":"1.0","type":"link"}