{"product_id":"kit-drone-altimeter-kit-with-arduino-nano-plus-lora","title":"Drone Altimeter Kit with Arduino Nano + LoRa","description":"\u003ch1\u003eDrone Altimeter \u0026amp; LoRa Telemetry Kit with Arduino Nano — Simulate CubeSat Downlink\u003c\/h1\u003e\n\n\u003cp class=\"value-summary\"\u003eEvery part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.\u003c\/p\u003e\n\n\u003cdiv class=\"specs-strip\"\u003e\n  \u003cspan\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Advanced\u003c\/span\u003e\n  \u003cspan\u003e\u003cstrong\u003eBuild Time:\u003c\/strong\u003e 6-8 hrs\u003c\/span\u003e\n  \u003cspan\u003e\u003cstrong\u003eAge:\u003c\/strong\u003e 18-21\u003c\/span\u003e\n  \u003cspan\u003e\u003cstrong\u003eSkill:\u003c\/strong\u003e Drone telemetry \u0026amp; LoRa communication\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eConstruct a complete drone-mounted telemetry payload that transmits real‑time altitude, attitude, and temperature data over LoRa. The dual Arduino Nano system and RA-02 modules form a point‑to‑point link that packs sensor readings into structured packets — exactly like a CubeSat downlink. You’ll encode metadata, timestamp with an RTC, log to microSD, and visualise on OLED, mastering the same communication stack used in satellite missions.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You'll Build\u003c\/h2\u003e\n\u003cp\u003eAn airborne altimeter unit reads height from the BMP280, motion from the MPU6050, and time from the DS3231. A first Arduino Nano assembles a CCSDS‑style frame with sync, counter, sensor bytes, and CRC, then fires it over 433MHz via the RA-02. On the ground, a second Arduino running the same LoRa module captures each packet, parses the fields, drives a 0.96‑inch OLED, and writes a timestamped log to a microSD card — a complete ground station you can repurpose for other experiments.\u003c\/p\u003e\n\n\u003ch2\u003eWhat You'll Learn\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConfigure and link RA-02 LoRa modules for reliable 433MHz point‑to‑point data\u003c\/li\u003e\n  \u003cli\u003eFuse BMP280 pressure\/altitude and MPU6050 accelerometer\/gyro data into a stable flight attitude estimate\u003c\/li\u003e\n  \u003cli\u003eBuild binary telemetry packets with sync words, sequence numbers, CRC‑8 checksums, and sensor payloads\u003c\/li\u003e\n  \u003cli\u003eParse incoming frames on a ground unit to drive an OLED display and a microSD logger\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArduino Nano\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRA-02 LoRa Module\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBMP280 Barometric Sensor\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMPU6050 6‑Axis IMU\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDS3231 Real‑Time Clock\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMicroSD Card Module\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e433MHz Antenna\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e0.96‑inch OLED Display\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e100nF Capacitor\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePCB Prototype Board\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e3.7V LiPo Battery 1000mAh\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTP4056 Charging Module\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTemperature‑Controlled Soldering Iron\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSolder Wire (50g)\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhy Buy This Kit Instead of Sourcing Parts Separately\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFactor\u003c\/th\u003e\n\u003cth\u003eSourcing Separately\u003c\/th\u003e\n\u003cth\u003eCompoden Kit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatibility checks\u003c\/td\u003e\n\u003ctd\u003eYou verify every part\u003c\/td\u003e\n\u003ctd\u003ePre-tested as a system\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBuild support\u003c\/td\u003e\n\u003ctd\u003eForums and scattered tutorials\u003c\/td\u003e\n\u003ctd\u003eAI companion trained on this exact project\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTime to first working build\u003c\/td\u003e\n\u003ctd\u003eDays of debugging\u003c\/td\u003e\n\u003ctd\u003eHours, with step-by-step guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eShipping coordination\u003c\/td\u003e\n\u003ctd\u003eMultiple sellers, multiple delays\u003c\/td\u003e\n\u003ctd\u003eOne shipment from Bengaluru in 3-5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Kit Is For\u003c\/h2\u003e\n\u003cp\u003eDesigned for final‑year B.Tech ECE, EEE, or aerospace students building a drone communication payload, Smart India Hackathon teams tackling CubeSat‑style telemetry, and ATL Tinkering Lab mentors running advanced wireless experiments. If you are at an IIT, NIT, VIT, or BITS Pilani and need a ready‑to‑assemble LoRa link that mirrors real satellite formats, this kit gives you the complete sensor‑to‑ground station pipeline.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt and Backed by Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eWhat if I get stuck during the build?\u003c\/summary\u003e\u003cp\u003eYour AI companion walks you through each function and wiring step. If you still need help, message us on WhatsApp — a real engineer will guide you directly.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I fly this on an actual drone?\u003c\/summary\u003e\u003cp\u003eYes. The payload runs on a 3.7V LiPo and weighs only a few tens of grams. You must provide a drone with sufficient lift and a safe way to mount the unit securely.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow does this simulate CubeSat downlink?\u003c\/summary\u003e\u003cp\u003eThe firmware frames binary packets with sync bytes, packet ID, timestamp, sensor payload, and a CRC checksum — the same method used in CCSDS space telemetry. You will learn how mission‑critical data integrity is maintained from sensor to ground.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need prior LoRa experience?\u003c\/summary\u003e\u003cp\u003eThis kit assumes you can program an Arduino and understand basic electronics. The AI companion explains LoRa configuration and packet formatting in detail, so while prior wireless experience helps, it is not required.\u003c\/p\u003e\u003c\/details\u003e\n\n\u003cdiv class=\"kit-description\"\u003e\n  \u003cp\u003eDrone — RA-02 LoRa transmits structured telemetry packets simulating CubeSat downlink. Ground station decodes.\u003c\/p\u003e\n  \u003ch4\u003eWhat's in this kit\u003c\/h4\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003ca href=\"\/products\/nano-r3-ch340-development-board-arduino-compatible-no-cable\"\u003eArduino Nano\u003c\/a\u003e x2\u003c\/li\u003e\n    \u003cli\u003e\n\u003ca href=\"\/products\/ra-02-lora-module-433470mhz-sx1278-spi-for-arduino-iot\"\u003eRA-02 LoRa\u003c\/a\u003e x2\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/bmp280-barometric-pressure-temperature-sensor-module-compodenin\"\u003eBMP280\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/mpu6050-imu-module-6-axis-gyro-accelerometer-for-arduino\"\u003eMPU6050\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/ds3231-real-time-clock-module-i2c-rtc-with-battery-backup\"\u003eDS3231 RTC\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/microsd-card-reader-spi-module-for-arduino\"\u003eMicroSD Module\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\n\u003ca href=\"\/products\/433mhz-antenna-quarter-wave-helical-for-rf-modules\"\u003e433MHz Antenna\u003c\/a\u003e x2\u003c\/li\u003e\n    \u003cli\u003e\n\u003ca href=\"\/products\/096in-oled-display-128x64-i2cspi-for-arduino-raspberry-pi\"\u003e0.96in OLED\u003c\/a\u003e x2\u003c\/li\u003e\n    \u003cli\u003e\n\u003ca href=\"\/products\/capacitor-variety-pack-6-values-100nf-to-470uf-30-pieces\"\u003e100nF Caps\u003c\/a\u003e x10\u003c\/li\u003e\n    \u003cli\u003e\n\u003ca href=\"\/products\/esp-wroom-32-breakout-board-pcb-55x52mm\"\u003ePCB Prototype Board\u003c\/a\u003e x2\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/37v-30c-1000mah-lipo-battery-yy802542-for-drones\"\u003e3.7V LiPo 1000mAh\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/tp4056-1a-li-ion-charger-module-with-protection-micro-usb\"\u003eTP4056 Module\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/soldering-kit-25w-with-solder-wire-flux-paste-compoden\"\u003eSoldering Iron\u003c\/a\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003ca href=\"\/products\/soldering-kit-25w-with-solder-wire-flux-paste-compoden\"\u003eSolder Wire\u003c\/a\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is included in the Drone Altimeter Kit with Arduino Nano + LoRa?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Drone Altimeter Kit with Arduino Nano + LoRa includes all components needed: Arduino Nano, RA-02 LoRa, BMP280, MPU6050, DS3231 RTC and more. Everything is pre-tested for compatibility and shipped from Bengaluru, India.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What skill level is required for the Drone Altimeter Kit with Arduino Nano + LoRa?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"This kit is designed for Advanced level makers, suitable for ages 18-21. Drone — RA-02 LoRa transmits structured telemetry packets simulating CubeSat downlink. Ground station decodes. Estimated build time is 6-8 hrs.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I buy the Drone Altimeter Kit with Arduino Nano + LoRa online in India?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, the Drone Altimeter Kit with Arduino Nano + LoRa is available online at Compoden (compoden.in), India's AI-powered electronics and robotics store. Ships from Bengaluru in 1-5 business days across India.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"Product\",\n  \"name\": \"Drone Altimeter Kit with Arduino Nano + LoRa\",\n  \"description\": \"Drone — RA-02 LoRa transmits structured telemetry packets simulating CubeSat downlink. Ground station decodes.\",\n  \"sku\": \"CDN-KIT-3847\",\n  \"brand\": {\"@type\": \"Brand\", \"name\": \"Compoden\"},\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"url\": \"https:\/\/compoden.in\/products\/kit-drone-altimeter-kit-with-arduino-nano-plus-lora\",\n    \"priceCurrency\": \"INR\",\n    \"price\": \"5440\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"seller\": {\"@type\": \"Organization\", \"name\": \"Compoden\"}\n  },\n  \"category\": \"Communication \u0026 Networking\"\n}\n\u003c\/script\u003e\u003cp\u003e\u003cstrong\u003eChoose your assembly option:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering Kit\u003c\/strong\u003e — 25W soldering iron, 60\/40 solder wire, flux, and small perfboard for permanent assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreadboard Combo\u003c\/strong\u003e — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Compoden","offers":[{"title":"Clone \/ Soldering Kit","offer_id":53463922344301,"sku":"CDN-KIT-3847-CL-SLD","price":5960.0,"currency_code":"INR","in_stock":true},{"title":"Clone \/ Breadboard Combo","offer_id":53463922377069,"sku":"CDN-KIT-3847-CL-BB","price":5430.0,"currency_code":"INR","in_stock":true},{"title":"R3 Original \/ Soldering Kit","offer_id":53463922409837,"sku":"CDN-KIT-3847-R3-SLD","price":8390.0,"currency_code":"INR","in_stock":true},{"title":"R3 Original \/ Breadboard Combo","offer_id":53463922442605,"sku":"CDN-KIT-3847-R3-BB","price":7860.0,"currency_code":"INR","in_stock":true},{"title":"R4 WiFi \/ Soldering Kit","offer_id":53463922475373,"sku":"CDN-KIT-3847-R4-SLD","price":7710.0,"currency_code":"INR","in_stock":true},{"title":"R4 WiFi \/ Breadboard Combo","offer_id":53463922508141,"sku":"CDN-KIT-3847-R4-BB","price":7170.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/kit-drone-altimeter-kit-with-arduino-nano-plus-lora.png?v=1781949609","url":"https:\/\/compoden.com\/products\/kit-drone-altimeter-kit-with-arduino-nano-plus-lora","provider":"Compoden","version":"1.0","type":"link"}