{"product_id":"md-ps002-150kpa-pressure-sensor-module-compoden","title":"MD-PS002 150KPa Pressure Sensor Module | Compoden","description":"\u003ch1\u003eMD-PS002 150KPa Pressure Sensor Module\u003c\/h1\u003e\n\u003cp\u003eThe MD-PS002 is a compact pressure sensor module that measures gauge pressure up to 150 kPa (approx 21.7 PSI) using a high-accuracy piezoresistive transducer. It outputs a linear analog voltage proportional to the applied pressure, making it straightforward to integrate with microcontrollers and ADCs. This module is commonly used for air pressure monitoring, altitude measurement, and industrial control in non-corrosive gas environments.\u003c\/p\u003e\n\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePressure Range\u003c\/td\u003e\n\u003ctd\u003e0 to 150 kPa (gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e5V DC ±0.25V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003eAnalog 0.2–4.7V (ratiometric)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAccuracy\u003c\/td\u003e\n\u003ctd\u003e±2.5% Full Scale Span\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +125°C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;1 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat You Can Build With This\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDigital tire pressure gauge with LCD readout\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/kit-indoor-weather-station\"\u003eDIY weather station barometer and altimeter\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003eHVAC duct pressure monitoring system\u003c\/li\u003e\n  \u003cli\u003eIndustrial process control for air flow and leak detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe sensor operates on 5V logic and outputs a 0.2–4.7V analog signal, making it directly compatible with Arduino Uno, Mega, and any microcontroller having an ADC input. For 3.3V boards like Raspberry Pi or ESP8266, use an external ADC or a level shifter. It pairs well with data loggers, IoT platforms, and displays that accept analog voltage inputs.\u003c\/p\u003e\n\n\u003ch2\u003eWiring Notes\u003c\/h2\u003e\n\u003cp\u003eConnect VCC to a regulated 5V supply, GND to common ground, and OUT to an analog input pin. Keep wiring short to minimise noise, and do not exceed the rated pressure or apply liquid or corrosive media. Use a pull-down resistor if the ADC requires a known impedance, though the module includes an internal output driver.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Buy from Compoden\u003c\/h2\u003e\n\u003cp\u003eEvery component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eIs this compatible with Arduino?\u003c\/summary\u003e\u003cp\u003eYes, it outputs a 0.2–4.7V analog signal compatible with any 5V Arduino board's ADC input, like Uno, Mega, or Nano.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is the maximum pressure it can safely measure?\u003c\/summary\u003e\u003cp\u003eThe sensor is rated for 0–150 kPa gauge pressure. Exceeding 200 kPa may permanently damage the sensing element.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use this sensor to measure liquid pressure?\u003c\/summary\u003e\u003cp\u003eNo, the sensor is designed for clean, dry, non-corrosive gases only. Exposure to liquids or aggressive chemicals can corrode the diaphragm.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdiv class=\"compoden-handoff\" style=\"margin-top:24px;padding:16px;background:#f0f4ff;border-left:4px solid #2B4D8F;border-radius:4px;\"\u003e\n  \u003cp style=\"margin:0 0 6px 0;font-weight:600;color:#1A3560;\"\u003e📦 Free Setup Handoff Document Included\u003c\/p\u003e\n  \u003cp style=\"margin:0;font-size:0.95em;color:#333;\"\u003eEvery Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Compoden","offers":[{"title":"Default Title","offer_id":53445120295277,"sku":"CDN-0590","price":150.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0999\/3997\/5533\/files\/image_1_53859c9f-4c84-4d47-a233-a70cffdd1bfd.jpg?v=1781513410","url":"https:\/\/compoden.com\/products\/md-ps002-150kpa-pressure-sensor-module-compoden","provider":"Compoden","version":"1.0","type":"link"}