Guides

How to Set Up the ESP8266 NodeMCU in the Arduin...

A practical guide to installing the ESP8266 board package and uploading your first sketch to a NodeMCU.

How to Set Up an STM32 Nucleo Board

A step-by-step guide to programming an STM32 Nucleo-64 board through its onboard ST-Link using the Arduino IDE.

How to Set Up an STM32 Blue Pill with ST-Link a...

A practical guide to flashing your first program onto an STM32 Blue Pill using an ST-Link V2 and the Arduino IDE.

Getting Started with the Raspberry Pi Pico (Mic...

A beginner-friendly guide to getting started with the Raspberry Pi Pico using MicroPython, from flashing firmware to running your first program in Thonny.

How to Set Up a Raspberry Pi: Imager, First Boo...

A clear walkthrough to set up a Raspberry Pi using Raspberry Pi Imager, including a headless SSH and Wi-Fi configuration and first boot.

How to Set Up an ESP32 in the Arduino IDE

A step-by-step guide to setting up an ESP32 in the Arduino IDE, including adding the boards URL and installing the CH340 driver.