24V 5A SMPS
Use this 24V chassis SMPS for 3D printers, higher-torque stepper systems, 24V pneumatic valves, and industrial-style sensor rails. Commonly used as a printer PSU replacement and for NEMA23 stepper rigs behind proper drivers. Not suitable for beginners: the input terminals carry mains voltage. Wire the AC side with the cover on, earth the case, and check every downstream part accepts 24V — most hobby modules are 5V/12V and will not survive it. Key specs: 230V AC in, 24V DC out, 5A max (120W), screw terminals, metal chassis, adjustable trim pot. Alternative: the 24V 3A adapter for lighter loads with a barrel connector.
Representative photo of this enclosure style: SparkFun Electronics, CC BY 2.0, via Wikimedia Commons.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items