5V 2A USB Power Bank 10000mAh for Portable Projects | Compoden
Use this 10000mAh power bank as the simplest portable 5V supply for USB-powered builds — ESP32, ESP8266, Raspberry Pi Zero, and any dev board that runs from its USB port. No regulator, no soldering: plug in a cable and the project is mobile. Commonly used for weather stations on a balcony, wearables demos, camera rigs, and long unattended sensor logging. Not suitable for boards needing more than 2A (Pi 4/5 under load), for 9–12V motor systems, or for very-low-drain sleep projects — many power banks auto-shut below ~50mA draw; check the build's sleep current. Key specs: 5V 2A USB-A output, 10000mAh (37Wh), micro-USB/USB-C input for recharging. Alternative: mains 5V adapters for permanent installs; 18650 shield modules for embedded battery power.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items