ECE Lab Kit 30 Induction Heating Demo Kit
Induction Heating Lab Kit: ZVS Driver & Power Measurement Demo
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
Bring the theory of electromagnetic induction to life with a real ZVS-driven induction heater. You'll heat metal samples using a high-frequency oscillating magnetic field and then measure electrical power input versus temperature rise over time. This kit turns a complex lab demonstration into a quantitative experiment for ECE and EEE students.
What You'll Build
After assembling the ZVS driver module and work coil according to the AI companion's step-by-step guide, you'll create a functioning induction heating apparatus. You'll then use the included infrared thermometer and multimeter to record temperature profiles for different metal targets, correlating input power (voltage × current) with heating rate. The result is a complete data-acquisition setup suitable for lab reports or project presentations.
What You'll Learn
- Understand ZVS (Zero Voltage Switching) oscillator operation and resonant frequency
- Measure electrical power input (voltage, current) with a multimeter and calculate heating efficiency
- Plot temperature-time curves for different metals, analyzing specific heat capacity effects
- Apply safety protocols for high-current circuits and handling hot metal surfaces (using safety gloves)
Kit Contents
| Component | Quantity |
|---|---|
| ZVS Driver Module | 1 |
| Work Coil | 1 |
| Metal Target Samples | 3 |
| 30V 5A Power Supply Unit | 1 |
| Infrared Thermometer | 1 |
| Digital Multimeter | 1 |
| Safety Gloves | 1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
Designed for CBSE Class 12 Physics students tackling electromagnetic induction projects, B.Tech ECE/EEE undergraduates performing power electronics lab experiments, and participants in Smart India Hackathon or tech fests looking for a ready-to-run demonstration. It's also ideal for ATL Tinkering Labs where supervised high-current experiments are conducted.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
The AI companion, accessible via QR code, provides real-time guidance specific to the ZVS driver and measurement setup. You can also reach us on WhatsApp for human support within hours.
Can we measure efficiency for different metals and voltages?
Yes. The 30V adjustable PSU and three metal samples (steel, aluminum, brass) allow you to vary input voltage and record heating curves at multiple setpoints, enabling precise efficiency comparisons.
Is the kit safe for a classroom with multiple students?
The ZVS module operates at 30V DC, and safety gloves are included. Instructor supervision is still recommended for handling hot metal surfaces and during high-current runs, but the setup is inherently low-risk when used as directed.
Does this kit require any soldering?
No. The ZVS driver module and coil use screw terminals; only multimeter probes and PSU banana plugs need to be connected. Setup is completely solder-free and takes under 15 minutes.
ZVS driver circuit demonstrates induction heating of a metal target — measure input power vs heating rate.
What's in this kit
- ZVS Driver Module
- Work Coil
- Metal Target Samples x3
- 30V 5A PSU
- Infrared Thermometer
- Digital Multimeter
- Safety Gloves
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items