Haptic Feedback Robotic Glove Kit with Arduino Nano + Sensor
Wireless Master-Slave Haptic Feedback Robotic Glove Kit with Arduino Nano & Flex Sensors
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
This kit lets you engineer a wearable glove that reads your finger curl in real time and transmits it via Bluetooth to a 5-DOF servo-powered prosthetic hand. Every flex of your fingers drives the mirrored motion of a remote claw, while a coin vibration motor pulses on your glove to simulate grasping force—turning a robotics concept into a fully tactile feedback system. It’s built for advanced makers exploring haptics, teleoperation, or human-robot interaction in their final-year projects.
What You'll Build
You’ll assemble a complete haptic teleoperation rig: a glove transmitting five flex sensor readings wirelessly over two HC-05 Bluetooth modules, and a receiver that converts those angles into precise servo commands for a prosthetic hand. The vibration motor on the glove responds proportionally to the current draw of the servos, so you feel a buzz when the robotic fingers encounter resistance—giving you a sense of touch even from a distance.
What You'll Learn
- Calibrating flex sensors to map finger curl to servo angles accurately
- Establishing Bluetooth master-slave communication between two Arduino Nano boards
- Implementing haptic feedback by converting servo load into vibration intensity
- Soldering and assembling reliable wearable circuits on prototype PCBs
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Nano | 2 |
| Flex Sensor 2.2in | 5 |
| SG90 Servo | 5 |
| HC-05 Bluetooth | 2 |
| Coin Vibration Motor | 1 |
| 47kΩ Resistors | 5 |
| 100nF Caps | 10 |
| PCB Prototype Board | 2 |
| Glove Base | 1 |
| 9V Battery Snap | 2 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
B.Tech (ECE, EEE, Mechatronics) students tackling haptics or teleoperation in their final year, Smart India Hackathon teams needing a plug-and-play feedback loop, and robotics enthusiasts who want a wireless force-feedback glove without building everything from scratch. If you’re working on human-robot interaction or a prosthetic control demo, this kit eliminates the sourcing and calibration headaches so you can focus on the system integration.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code on your kit box to access the AI companion trained on this exact project. It walks you through debugging, wiring verification, and code logic. If you still need clarification, WhatsApp a photo of your setup and we’ll respond within 24 hours.
Does this kit include everything I need to start building?
Yes. You get all electronic components, the glove base, a soldering iron, and solder wire. You’ll need a laptop with Arduino IDE, a wire stripper, and a multimeter for testing—standard tools in any electronics lab.
How do I pair the two HC-05 modules for wireless control?
The AI companion includes a dedicated module on AT-command configuration. You’ll set one as master and the other as slave, and the provided code handles data packet transmission and error checking automatically. Full pairing instructions are included.
Can I add pressure sensors to the prosthetic hand for real force feedback?
Absolutely. The PCB prototype boards expose spare digital and analog pins on both Arduino Nanos. The AI companion can suggest modifications to read force-sensing resistors and map them to vibration intensity, turning your build into a true bidirectional haptic system.
Five flex sensors mirror finger curl to servo prosthetic hand over Bluetooth. Vibration motor on force.
What's in this kit
- Arduino Nano x2
- Flex Sensor 2.2in x5
- SG90 Servo x5
- HC-05 Bluetooth x2
- Coin Vibration Motor
- 47kΩ Resistors x5
- 100nF Caps x10
- PCB Prototype Board x2
- Glove Base
- 9V Battery Snap x2
- Soldering Iron
- Solder Wire
Choose your assembly option:
- Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Other projects you can build
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items