Starter Kit: UNO R3, Breadboard, LEDs, Resistors, Jumper Wires, Power
Starter Kit: UNO R3, Breadboard, LEDs, Resistors, Jumper Wires, Power
This starter kit includes an Arduino UNO R3 board, an 830-point breadboard, 10 LEDs, 20 resistors, 40 male-to-male jumper wires, and a power supply with USB cable and 9V battery snap. Designed for beginners, it provides everything needed to start building circuits and learning microcontroller programming. All components are compatible with the Arduino IDE and widely used in electronics projects.
Key Specifications
| Specification | Value |
|---|---|
| Microcontroller Board | Arduino UNO R3 (ATmega328P, 16 MHz, 32 KB Flash, 2 KB SRAM) |
| Breadboard | 830-point solderless breadboard with power rails |
| LEDs | 10x 5mm LEDs (red, green, yellow, blue, white) |
| Resistors | 20x 1/4W carbon film resistors (assorted values from 220 Ω to 10 kΩ) |
| Jumper Wires | 40x male-to-male, 20 cm length |
| Power Supply | USB cable (Type A to B) and 9V battery snap connector |
What You Can Build With This
- Blinking LED – learn digital output and timing
- Traffic light controller – sequence multiple LEDs
- Light-sensitive night lamp – use an LDR with analog input
- Simple alarm system – combine a buzzer and button
Compatibility
This kit is fully compatible with the Arduino IDE on Windows, macOS, and Linux. The UNO R3 works with most Arduino shields and sensors available on compoden.in. Operating voltage is 5V, and it can be powered via USB or a 7–12V external supply through the barrel jack or Vin pin.
Wiring Notes
Connect the UNO R3 to the breadboard using male-to-male jumper wires. Always use a 220 Ω resistor in series with each LED to limit current. The 9V battery snap can be plugged into the barrel jack to power the board when not using USB.
Why Buy from Compoden
Every component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.
Is this compatible with Arduino IDE?
Yes, it is fully compatible. Install the Arduino IDE, select board “Arduino/Genuino Uno,” and use the included USB cable to program.
What additional components might I need?
For advanced projects, you can add sensors, motors, or displays—many available separately on compoden.in.
Is it suitable for a complete beginner?
Absolutely. The kit includes all essentials to start learning electronics and programming, and many free tutorials are available online.
📦 Free Setup Handoff Document Included
Every Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items