UNO R3 Starter Kit: Breadboard, LEDs, Resistors, Wires & Power
Starter Kit with UNO R3, Breadboard, LED, Resistor, Jumper Wires and Power
This complete starter kit includes everything you need to begin with microcontroller programming and electronics prototyping. The included UNO R3 board is compatible with Arduino IDE and widely used in educational and hobby projects. Ideal for learning basic circuits, coding, and building interactive devices.
Key Specifications
| Specification | Value |
|---|---|
| UNO R3 Board | 1 unit, ATmega328P, 5V logic |
| Breadboard | 830 tie-points, self-adhesive backing |
| LEDs | 5 each: Red, Green, Yellow (5mm) |
| Resistors | 20 pieces: 220Ω, 1kΩ, 10kΩ (1/4W) |
| Jumper Wires | 30 pieces, male-to-male, 20cm |
| Power Supply | 9V battery snap with DC barrel jack |
What You Can Build With This
- Blink an LED and control multiple lights
- Create a traffic light simulator with delays
- Build a simple temperature sensor using analog input
- Make a push-button controlled countdown timer
Compatibility
Fully compatible with Arduino IDE and all standard Arduino libraries. Works with Windows, macOS, and Linux. The UNO R3 board can interface with most 5V sensors, servo motors, and shields. Power it via USB or the included 9V battery connector.
Wiring Notes
Place the UNO board on the breadboard or use jumper wires to bridge connections. LEDs require a 220Ω resistor in series to prevent burnout. Ensure correct polarity: longer leg is anode. Use red wire for 5V, black for GND.
Why Buy from Compoden
Every component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.
Is this compatible with Arduino IDE?
Yes, the UNO R3 board works seamlessly with the official Arduino IDE. Just select “Arduino Uno” from the board manager and upload your code.
Do I need to solder anything?
No soldering required. All connections are made using the breadboard and jumper wires. Plug and play.
What projects can a complete beginner build?
You can start with blinking an LED, then move to button-controlled LEDs, a digital dice, or a small alarm system. Each project teaches basic coding and circuit design.
📦 Free Setup Handoff Document Included
Every Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items