Collection: Sensors

Sensors are how a project notices the world: temperature and humidity, motion and tilt, distance, light, soil moisture, liquid level, magnetic fields, touch, sound and electrical current. This collection brings together every sensor module we stock. The smaller collections, such as temperature and humidity, distance or current sensors, narrow it down by type.

Before you pick one, check three things. First, the interface: analog sensors give a voltage, while digital sensors talk over I2C, SPI, UART or a single-wire protocol. Second, the supply and logic voltage, because a 5 V module can damage a 3.3 V board's input. Third, the I2C address, since two modules with the same address cannot share a bus without help.

Many sensors here link to a reference page on soldr.ai with the pins, supply range and figures from the maker's datasheet, and with project ideas to try.

Reference pages on soldr.ai

Guides: I2C address conflicts.

Describe your build on Soldr and it picks the parts, writes and compiles the code, and shows how to wire them. Sign in and get 100 credits free.

Frequently asked questions

What is the difference between analog and digital sensors?

An analog sensor gives a voltage that the board reads with an analog input. A digital sensor sends its reading as data over I2C, SPI, UART or a single-wire protocol.

Can I connect two I2C sensors to one board?

Yes, if their addresses differ. Many modules let you change the address with a pin or a solder jumper; otherwise an I2C multiplexer can separate them.

Will a 5 V sensor work with an ESP32?

Its supply can often be 5 V, but its output must not drive a 3.3 V ESP32 input above 3.3 V. Use a divider or level shifter, or run the module from 3.3 V if its datasheet allows.

Dispatch in 3–7 days for in-stock orders · GST invoice with every order · 5,200+ products in stock · Ships across India · COD available