3-Cell 18650 Battery Holder (Series, 11.1V)
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Use this to hold three 18650 cells wired in series, giving an 11.1V pack from a single part instead of chaining single holders and soldering between them. Commonly used for 3S4P pack assembly, 12V portable builds and rover battery bays. Not suitable on its own as a protected pack — a holder is a mechanical part with no protection circuit, so pair it with a 3S BMS before charging or discharging. Key specs: 3 x 18650, series wiring, 11.1V nominal, solder tabs. Alternative: the single-cell holder if you are building a 1S project, or the 4-cell holder for a 4S pack.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items