Home › 5mm LED – Single Piece (Red, Green, Yellow, Blue, White, Warm White)
No image available
In Stock

5mm LED – Single Piece (Red, Green, Yellow, Blue, White, Warm White)

SKU: CDN-3256-RED Brand: Compoden Category: Electronics > Electronic Components
Rs. 5.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 85414100
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

5mm LED – Single Piece

A single 5mm round through-hole LED, sold one piece at a time so you can buy exactly the colours your circuit needs. Choose red, green, yellow, blue, white or warm white. Two leads: the longer lead is the anode (+); the shorter lead, next to the flat on the rim, is the cathode (−). Price is per piece and includes GST.

Key Specifications

Specification Value
Package 5mm round (T-1 3/4), through-hole, 2 leads, 2.54 mm lead spacing
Colours Red, Green, Yellow, Blue, White, Warm White (choose a variant)
Forward current (typical) 20 mA maximum continuous; 10–15 mA recommended for indicators
Polarity Long lead = anode (+); short lead / flat side = cathode (−)

Per-Colour Specifications (typical)

Colour Lens (typical) Wavelength / colour (typical) Forward voltage at 20 mA (typical) Series resistor at 5 V Series resistor at 3.3 V
Red Diffused, red tint 620–635 nm 1.8–2.2 V 220 Ω (≈13 mA) 100 Ω (≈13 mA)
Yellow Diffused, yellow tint 585–590 nm 1.8–2.2 V 220 Ω (≈13 mA) 100 Ω (≈13 mA)
Green Diffused, green tint (yellow-green chip) 565–573 nm 1.9–2.4 V 220 Ω (≈13 mA) 100 Ω (≈12 mA)
Blue Water-clear 465–470 nm 3.0–3.4 V 150 Ω (≈12 mA) 33 Ω (dim; see note)
White Water-clear Cool white, about 6000–7000 K 3.0–3.4 V 150 Ω (≈12 mA) 33 Ω (dim; see note)
Warm White Water-clear Warm white, about 3000 K 3.0–3.4 V 150 Ω (≈12 mA) 33 Ω (dim; see note)

All figures are typical values for standard indicator LEDs of this size, taken from common manufacturer datasheets; they are not a datasheet for one specific batch. The green variant uses a yellow-green chip (about 565–573 nm, about 2 V). If you need a deep true green (about 520–525 nm, about 3 V), it behaves like the blue and white rows.

Usage Note: Which Resistor?

Always put a current-limiting resistor in series with the LED: R = (supply voltage − LED forward voltage) ÷ current. From a 5 V Arduino pin, use 220 Ω for red, yellow and green, and 150 Ω for blue, white and warm white (330 Ω / 220 Ω for a dimmer, lower-current indicator). From a 3.3 V pin (ESP32, Raspberry Pi Pico, Raspberry Pi), use 100 Ω for red, yellow and green. Blue, white and warm white need about 3.0–3.4 V themselves, so at 3.3 V they light only dimly or unevenly; for full brightness power them from 5 V with a 150 Ω resistor through a transistor (for example a 2N2222 or BC547) switched by the 3.3 V pin.

Wiring: GPIO pin → resistor → anode (long lead); cathode (short lead) → GND.

What You Can Build With This

  • Status and power indicators on Arduino, ESP32 and Raspberry Pi Pico projects.
  • Blink, traffic-light and binary-counter exercises.
  • Fault, alarm and low-battery indicators.
  • Replacing a single failed LED without buying a whole pack.
Is the price per piece?

Yes. Each unit you add to the cart is one LED. Add the quantity you need of each colour.

Do I need a resistor?

Yes. An LED connected straight to a 5 V or 3.3 V pin without a resistor draws too much current and can be damaged, along with the pin. Our single 1/4 W resistors (220 Ω, 330 Ω, 100 Ω) are sold separately.

What is the difference between diffused and water-clear?

A diffused (frosted, tinted) lens spreads the light evenly and is easy to look at directly. A water-clear lens gives a brighter, narrower beam.

Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →