720 Magnetic Coreless Drone Motor Set (2CW+2CCW) High-Speed Mini
720 Magnetic Micro Coreless Drone Motors Set (2 CW + 2 CCW)
The 720 magnetic micro coreless drone motor set delivers four high‑speed motors in a matched pair configuration: two clockwise (CW) and two counter‑clockwise (CCW). These 7 mm diameter, 20 mm long coreless motors are built for mini quadcopters and tiny whoop‑style builds where low weight and fast throttle response matter. Neodymium magnets inside each shell produce consistent torque on a single LiPo cell, so you can build a responsive micro drone without complex gearing.
Key Specifications
| Specification | Value |
|---|---|
| Motor diameter | 7 mm |
| Motor length | 20 mm |
| Rotation | 2 CW, 2 CCW |
| Rated voltage | 3.7 V (1S LiPo) |
| Shaft diameter | 1 mm |
| Weight per motor | ~3 g |
What You Can Build With This
- A 65 mm‑class tiny whoop with a 1S brushed flight controller and 31 mm props
- A lightweight indoor micro quadcopter that fits into the palm of your hand
- A simple thrust‑vectored paper plane with differential motor control
- A miniature vibration robot or a two‑motor line follower using the CW/CCW pair alone
Compatibility
These motors pair directly with 1S brushed flight controllers such as BetaFPV Lite, Eachine Beecore, or generic F3/F4 brushed boards. They accept propellers with a 1 mm shaft hole; typical choices are 31 mm 2‑blade or 40 mm 2‑blade propellers. Because each motor draws around 2 A at full throttle, use a battery capable of 10 A continuous discharge – a 300‑450 mAh 1S LiPo works well.
Wiring Notes
Solder the motor wires directly to the flight controller’s ESC pads. CW motors often have red and blue leads, while CCW motors have black and white leads. Always verify rotation by briefly powering up before final assembly; swap any two wires of a brushed motor to reverse its direction.
Why Buy from Compoden
Every component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.
Is this compatible with the BetaFPV Lite brushed flight controller?
Yes. The 720 motors work with any 1S brushed board that uses standard FET‑driven motor outputs, including the BetaFPV Lite series. Just solder the wires to the motor pads and confirm the correct rotation direction.
What battery should I use with these motors?
A 1S LiPo battery rated 3.7 V with 300–450 mAh capacity and at least 30C discharge (to handle 2 A per motor) is recommended. JST‑PH or Molex connectors are typical for this class of micro drone.
Do I need to program rotation direction, or is it fixed?
The rotation direction is physically determined by the motor’s internal construction; CW and CCW units are pre‑marked. You cannot change direction through software, so use the correct motor in each arm position. If a motor spins the wrong way, swap it with the opposite rotation type.
📦 Free Setup Handoff Document Included
Every Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items