Humidity-Triggered Relay Kit: Arduino Uno, DHT11, Relay
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Humidity-Triggered Relay Kit: Arduino Uno, DHT11, Relay — a beginner-level kit.
Humidity-Triggered Relay Kit: Arduino Uno, DHT11, Relay
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Not for mains appliances. Don't wire it into a dryer or any mains device; the DHT11 can't survive the heat inside a dryer.
Kit at a glance
What you build: A humidity-triggered relay: a DHT11 tells an Arduino Uno the room's humidity, and a relay switches a low-voltage fan or light when it falls below your threshold. A first lesson in switching on a sensor reading.
What's in the box
- Arduino Uno R3
- DHT11
- 5V Relay Module
- 1N4007 Diode × 5
- 10kΩ Resistors × 5
- 400-pt Breadboard
- M-M Wires × 15
- 9V Battery Snap
What You'll Build
A humidity-triggered relay: a DHT11 tells an Arduino Uno the room's humidity, and a relay switches a low-voltage fan or light when it falls below your threshold. A first lesson in switching on a sensor reading.
What You'll Learn
- How to read real-time humidity data from a DHT11 sensor using Arduino Uno
- How to write conditional logic in Arduino IDE to automate decisions based on sensor values
- How to build circuits on a breadboard, including using protection diodes and pull-up resistors
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | 1 |
| DHT11 | 1 |
| 5V Relay Module | 1 |
| 1N4007 Diode | 5 |
| 10kΩ Resistors | 5 |
| 400-pt Breadboard | 1 |
| M-M Wires | 15 |
| 9V Battery Snap | 1 |
Who This Kit Is For
This beginner-friendly project is perfect for school students who want to submit an electronics project at a science fair or ATL Tinkering Lab. It also introduces automation at home. No prior soldering or coding experience is needed—the AI companion walks through every line of code.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code on the box to talk to the AI companion trained on this exact kit. You can also reach us on WhatsApp for direct support from our team—we respond.
Can I adjust the humidity threshold?
Yes, the Arduino code lets you set any threshold value. The AI companion will show you exactly where to change it, and the breadboard makes it easy to test before final placement.
What's in this kit
- Arduino Uno R3
- DHT11
- 5V Relay Module
- 1N4007 Diode x5
- 10kΩ Resistors x5
- 400-pt Breadboard
- M-M Wires x15
- 9V Battery Snap
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items