Resistor Variety Pack - 100 Pcs, 10 Values, 1/4W Carbon Film
Resistor Variety Pack - 100 Pieces (10 Values from 220Ω to 1MΩ)
This resistor pack contains 100 carbon film resistors: 10 pieces each of 220Ω, 330Ω, 470Ω, 1kΩ, 2.2kΩ, 4.7kΩ, 10kΩ, 47kΩ, 100kΩ, and 1MΩ. Designed for breadboard prototyping, these 1/4-watt resistors cover the most commonly needed values for electronics projects. The 5% tolerance and sturdy axial leads make them reliable for both hobbyist and educational use.
Key Specifications
| Specification | Value |
|---|---|
| Resistance Range | 220Ω, 330Ω, 470Ω, 1kΩ, 2.2kΩ, 4.7kΩ, 10kΩ, 47kΩ, 100kΩ, 1MΩ |
| Quantity | 100 pieces (10 per value) |
| Power Rating | 1/4 Watt (0.25W) |
| Tolerance | ±5% |
| Type | Carbon film |
| Lead Type | Axial (through-hole) |
What You Can Build With This
- LED current limiting resistors for safe operation on 5V and 3.3V circuits.
- Pull-up/pull-down networks for push buttons and digital inputs on microcontrollers.
- Voltage dividers for sensor interfacing and level shifting.
- Biasing resistors for transistor amplifiers and logic inverters.
Compatibility
These through-hole resistors fit standard 0.1-inch breadboards and prototyping boards. They work with any microcontroller or single-board computer that uses 5V or 3.3V logic, including Arduino Uno, Raspberry Pi, ESP32, and STM32 boards. The 1/4W rating handles most low-power signal circuits.
Wiring Notes
Insert the axial leads directly into a breadboard or solder them onto a perfboard. Keep leads trimmed close to the board to avoid shorts. No polarity—resistors work in either direction. For circuits drawing more than 0.25W, check Ohm's law to ensure you are not exceeding the power rating.
Why Buy from Compoden
Every component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.
Is this resistor pack suitable for Arduino projects?
Yes, the included values cover common needs like LED current limiting, pull-up/pull-down, and voltage dividers for Arduino inputs and outputs.
What is the tolerance of these resistors?
Each resistor has a ±5% tolerance, indicated by a gold fourth band. For most hobbyist applications, this is sufficiently accurate.
Can I use these with a Raspberry Pi?
Absolutely. The 1/4W through-hole resistors are ideal for 3.3V GPIO circuits on the Raspberry Pi, such as LED indicators or button interfaces.
📦 Free Setup Handoff Document Included
Every Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items