Enclosure Box for DIY Electronics Projects | Compoden
Enclosure Box
A compact, black ABS plastic enclosure designed to house small electronics projects, development boards, and custom PCBs. The snap-fit lid provides secure closure without screws, while internal mounting posts support tidy PCB installation. An essential starting point for turning a bare circuit into a clean, protected prototype.
Key Specifications
| Specification | Value |
|---|---|
| Material | ABS plastic (UL94-HB) |
| External Dimensions (L x W x H) | 100mm x 60mm x 25mm |
| Internal Clearance (L x W x H) | 93mm x 53mm x 21mm |
| Lid Type | Snap-fit |
| Mounting Holes | 4 x Ø3.2mm (corners) |
| Color | Black |
What You Can Build With This
- Arduino Nano weather station with OLED display
- Raspberry Pi Pico environmental sensor logger
- Custom USB‑powered LED controller
- Portable TDA2030 audio amplifier module housing
Compatibility
Fits single‑board computers up to 90mm x 50mm, including Arduino Nano, Raspberry Pi Pico, ESP32 DevKit, and most small breadboards. The internal height clears common headers and low‑profile modules like DHT22 sensors. Works best with 5V and 3.3V logic circuits; no electrical rating applies.
Wiring Notes
Drill entry holes for cables or use snap‑out knockouts (if present) and fit rubber grommets to protect wires. Secure PCBs to the four mounting posts with M3 self‑tapping screws. Keep high‑current traces well isolated from the plastic walls.
Why Buy from Compoden
Every component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.
Is this enclosure waterproof?
No, the snap‑fit lid is not sealed against moisture. For splash‑resistant projects, apply a silicone gasket or choose an IP65‑rated box.
Does it come with mounting screws?
The box includes four M3 self‑tapping screws for securing a PCB to the internal posts. External mounting hardware is not included.
Can I paint or drill this enclosure easily?
Yes, ABS plastic is easy to drill with a standard twist drill bit and can be painted with acrylic or enamel paints after light sanding.
📦 Free Setup Handoff Document Included
Every Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items