100x 10Ω 1/4W Resistors for MOSFET Gate Drive - Compoden
10Ω 1/4W Gate Resistors (100 Pieces)
This pack contains 100 through-hole resistors with a resistance of 10Ω and a power rating of 1/4W. Commonly used in MOSFET gate driving circuits, these resistors help control switching speed and reduce ringing. They are essential for any power electronics project requiring reliable MOSFET switching. With 100 pieces per pack, you'll have plenty for prototyping and production runs.
Key Specifications
| Specification | Value |
|---|---|
| Resistance | 10Ω |
| Power Rating | 1/4W (250mW) |
| Tolerance | ±5% |
| Package | Axial Through-Hole |
| Quantity | 100 Pieces |
| Temperature Coefficient | ±350 ppm/°C |
What You Can Build With This
- MOSFET gate driver circuit to minimize ringing and overshoot
- H-bridge motor driver for robotics and automation projects
- Protection circuit for microcontroller pins driving high-current MOSFETs
- Snubber network for suppressing voltage spikes in inductive load switching
Compatibility
These resistors work with any standard breadboard or PCB. Suitable for 3.3V and 5V logic level MOSFETs like the IRLZ44N or IRFZ44N. They can be paired with Arduino, ESP32, Raspberry Pi, or any common microcontroller platform.
Wiring Notes
Place the resistor as close as possible to the MOSFET gate pin to minimize trace inductance. For most gate drive applications, a value between 10Ω and 100Ω is recommended; 10Ω provides fast switching with some ringing control.
Why Buy from Compoden
Every component is sourced from verified suppliers and tested for compatibility before listing. We've spent 10 years building projects for makers, schools, and institutions across India. Ships from Bengaluru in 3-5 days. If defective on arrival, replace within 7 days.
Is this compatible with Arduino?
Yes, these 10Ω resistors can be connected between an Arduino digital output pin and a MOSFET gate to limit inrush current and protect the pin.
What is the power rating?
Each resistor is rated for 1/4 watt (250mW), suitable for low-power gate drive signals where gate current is minimal.
Can I use these for other purposes like LED current limiting?
While they can be used for current limiting, 10Ω is very low and may not be suitable for standard LEDs without additional resistors. Primarily designed for gate drive applications.
📦 Free Setup Handoff Document Included
Every Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.
Ask Soldr above what you can build with this — it knows every Compoden kit this part appears in.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items