Arduino Fire Sprinkler Kit: Mini Fire Suppression STEM Project
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Arduino Fire Sprinkler Kit: Mini Fire Suppression STEM Project — a beginner-level kit.
Arduino Fire Sprinkler Kit: Mini Fire Suppression STEM Project - Build a Fire Detection & Suppression System
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
You will wire a flame sensor that detects a candle flame, then triggers a relay to turn on a mini pump, spraying water to extinguish the fire. It shows the sense-then-act logic used in sprinkler systems. It is a learning prototype, not a certified safety device. Use only a candle-sized flame on a non-flammable surface, with an adult present.
What You'll Build
A working tabletop model that senses a flame and immediately activates a water pump to spray a fine mist, putting it out. The red LEDs flash as an alarm, and the silicone tube directs water exactly where needed. This hands-on demonstration mirrors the logic of industrial sprinklers in a miniature tabletop format.
What You'll Learn
- How flame sensors detect infrared light from fire
- How to use a relay module to control high-power devices safely
- Basic circuit connections on a breadboard with resistors and LEDs
- The logic behind automated safety systems and sensor-actuator loops
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Nano | x1 |
| Flame Sensor Module | x1 |
| 5V Relay Module | x1 |
| Mini Pump | x1 |
| Silicone Tube 30cm | x1 |
| LED Red | x2 |
| 220Ω Resistors | x3 |
| Half Breadboard | x1 |
| MiniUSB Cable | x1 |
| M-M Wires | x15 |
| Small Container | x1 |
Who This Kit Is For
Suits anyone exploring electronics and how sprinkler logic works, including ATL Tinkering Labs and school science exhibitions. This kit also fits school-level STEM clubs, robotics workshops, and makers eager to build a memorable working model they can demonstrate with pride.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project - accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code to access the AI companion that guides you step-by-step, and if you need a real person, our WhatsApp support replies.
Is the kit safe? Does it use real fire?
Yes, a small candle flame for the sensor to detect; the pump runs on 5V DC and sprays water. Keep water away from the Arduino and breadboard.
Can I reuse the parts for other projects later?
Absolutely. All components (Arduino Nano, relay, sensors, breadboard) are standard and can be reused for other Arduino experiments as your skills grow.
Does the kit include code and instructions?
Yes, the AI companion provides ready-to-upload Arduino code, wiring diagrams, and troubleshooting tips tailored to this exact kit, so no prior programming experience is needed.
Flame sensor triggers relay that runs a mini pump spraying water - fire detection and suppression demonstration.
What's in this kit
- Arduino Nano
- Flame Sensor Module
- 5V Relay Module
- Mini Pump
- Silicone Tube 30cm
- LED Red x2
- 220Ω Resistors x3
- Half Breadboard
- MiniUSB Cable
- M-M Wires x15
- Small Container
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items