AQ Light Kit with Arduino Nano + MQ135
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
AQ Light Kit with Arduino Nano + MQ135 — a beginner-level build.
Build a Colour-Coded Air Quality Indicator with Arduino Nano and MQ-135
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
An MQ-135 gas sensor and three LEDs turn changing air into a colour you can see at a glance: green, amber or red as the sensor's reading rises. It is a learning project for understanding how gas sensors respond, not a gas alarm or a safety device.
What You'll Build
You wire the MQ-135 module and three coloured LEDs with series resistors to an Arduino Nano on the breadboard. After the sensor warms up, you take a baseline reading in fresh air, then set two thresholds in the code. The sketch reads the analog value and lights the LED for the band the reading falls in.
What You'll Learn
- Reading an analog gas sensor with an Arduino Nano
- Why MQ sensors need a warm-up and a fresh-air baseline
- Using if-else bands to drive colour-coded LEDs
- Choosing series resistors for LEDs
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Nano (CH340 clone) | 1 |
| MQ-135 Air Quality Gas Sensor Module | 1 |
| 5mm LED Assorted Pack (Red, Green, Blue, Yellow, White) | 1 |
| Resistor Variety Pack - 10 Values, 1/4W Carbon Film | 1 |
| 400-point solderless breadboard | 1 |
| Dupont Jumper Wire Kit (M-M, M-F, F-F, 20cm, 22AWG) | 1 |
Who This Kit Is For
Beginners who want a first sensor project with a clear visual result, and science-project makers exploring how air changes with cooking, cleaning or ventilation.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
Does the MQ-135 give a reading in ppm?
Not directly. It gives a relative reading that changes with several gases, humidity and temperature. Use it to compare readings over time, not as a calibrated measurement.
Why does the sensor need to warm up?
Its heater must reach a stable temperature before readings settle. Let it run before setting your thresholds.
Can I use this as a gas leak alarm?
No. It is a learning project and not a safety device. Use a certified detector for gas safety.
Arduino Nano and MQ-135 air-quality indicator that lights a green, amber or red LED as the reading rises. A learning project, not a safety device.
What's in this kit
Do you deliver across India?
Yes. We ship AQ Light Kit with Arduino Nano + MQ135 across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Orders ship in 3-7 days.
What payment options are available for AQ Light Kit with Arduino Nano + MQ135?
We accept UPI, all major debit and credit cards, and Cash on Delivery (COD) available.
Built and shipped from Compoden, with UPI and cards, plus COD available.
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items