Nursery Bluetooth Climate Reporter Kit: Uno, HC-05, DHT11
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Nursery Bluetooth Climate Reporter Kit: Uno, HC-05, DHT11 — a beginner-level kit.
Nursery Bluetooth Climate Reporter Kit: Uno, HC-05, DHT11
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A nursery Bluetooth reporter: an Arduino Uno reads temperature and humidity from a DHT11 and sends them every second through an HC-05 to a Bluetooth serial app on your Android phone, with two LEDs for too warm or too cool.
What's in the box
- Arduino Uno R3
- DHT11 Sensor
- HC-05 Bluetooth
- 5mm LED × 2
- 100Ω Resistors × 5
- 10kΩ Resistors × 5
- 400-pt Breadboard
- M-M Wires × 20
- 9V Battery Snap
Power: 9V battery, not included.
Skill level: Beginner (2-3 hours, no soldering).
Frequently asked questions
Is it a baby monitor?
No. It reports room climate only.
Does it work with iPhones?
The HC-05 uses Bluetooth Classic, which iPhones don't support for this.
With this kit, you’ll build your own wireless comfort monitor that streams live temperature and humidity readings to your phone every second—helping you keep the nursery safe and cosy through every nap, without tiptoeing in to check a thermometer.
What You'll Build
A compact, battery-powered sensor station on a breadboard that pairs an Arduino Uno with a DHT11 temperature-humidity sensor and an HC-05 Bluetooth module. Once assembled, it automatically sends real-time data to a Bluetooth serial terminal app on your smartphone. Place it discreetly in the nursery and monitor the room from your couch or kitchen—no Wi-Fi or cloud account required.
What You'll Learn
- How to interface a DHT11 digital sensor with Arduino and read calibrated temperature and humidity values.
- How to configure an HC-05 Bluetooth module as a wireless serial link for long-lasting data streaming.
- How to write Arduino code that continuously samples and transmits sensor data every second.
- How to use a smartphone terminal app to receive and visualise live data from a microcontroller project.
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | 1 |
| DHT11 Sensor | 1 |
| HC-05 Bluetooth | 1 |
| 5mm LED | 2 |
| 100Ω Resistors | 5 |
| 10kΩ Resistors | 5 |
| 400-pt Breadboard | 1 |
| M-M Wires | 20 |
| 9V Battery Snap | 1 |
Who This Kit Is For
B.Tech ECE students prototyping Bluetooth-based health monitoring systems will also find it a handy reference.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Simply scan the QR code on the box to access the AI companion, which has been trained on this exact project. You can also reach us on WhatsApp for human support if you need it.
Does a Bluetooth serial terminal app work on iPhone?
The standard app on the Play Store is Android-only, but iOS users can use any BLE Terminal app that supports HM-10 or similar modules. Our AI companion includes setup notes for iPhone users.
Is the DHT11 accurate enough for a nursery?
The DHT11 offers ±2°C temperature and ±5% humidity accuracy, which is sufficient for checking that the room stays within the recommended 20-24°C range. For higher precision, you can swap in a DHT22 (not included).
What's in this kit
- Arduino Uno R3
- DHT11 Sensor
- HC-05 Bluetooth
- 5mm LED x2
- 100Ω Resistors x5
- 10kΩ Resistors x5
- 400-pt Breadboard
- M-M Wires x20
- 9V Battery Snap
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items