Grow Tent Humidity Controller Kit: Arduino Uno, DHT11, Relay
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Grow Tent Humidity Controller Kit: Arduino Uno, DHT11, Relay — a beginner-level kit.
Grow Tent Humidity Controller Kit: Arduino Uno, DHT11, Relay
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A grow tent humidity controller: a DHT11 inside the tent tells an Arduino Uno when humidity drops below your target, and a relay runs a mister or humidifier until it's back up. Green LEDs mean in range; red means too dry or too damp.
What's in the box
- Arduino Uno R3
- DHT11
- 5V Relay Module
- 5mm Green LED × 2
- 5mm Red LED × 2
- 1N4007 Diode × 5
- 10kΩ Resistors × 5
- 220Ω Resistors × 5
- 400-pt Breadboard
- M-M Wires × 20
- 9V Battery Snap
Power: 9V battery, not included. A 9V battery won't last long with relays on; a USB or DC adapter suits it better. The mister is not included.
Skill level: Beginner (2-3 hours, no soldering).
Frequently asked questions
Why a DHT11?
It's fine for humidity control in this range; a DHT22 is more precise.
Can it switch mains devices?
The relay can, but mains wiring needs a qualified person.
What if your greenhouse could automatically mist the plants when humidity drops? With this kit, you’ll build a real‑time climate monitor using an Arduino Uno, DHT11 sensor, and relay module. It reads humidity inside the grow tent, triggers a misting fan when humidity falls below a set level, and lights up an LED to show the zone’s status—exactly like systems used in commercial polyhouses across India.
What You'll Build
By the end of this 2-3 hour build, you’ll have a working humidity controller that can be placed inside any greenhouse or indoor grow setup. The DHT11 continuously senses moisture levels; when humidity falls below your programmed threshold, the relay activates a fan or mister. A green LED confirms stable conditions, while a red LED warns of dry air—giving you visual zone status at a glance.
What You'll Learn
- Wiring and coding a DHT11 humidity sensor with Arduino Uno
- Controlling a high‑power device (misting fan) through a relay module
- Setting threshold‑based automation logic in Arduino IDE
- Building LED indicators for real‑time system status
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | 1 |
| DHT11 | 1 |
| 5V Relay Module | 1 |
| 5mm Green LED | 2 |
| 5mm Red LED | 2 |
| 1N4007 Diode | 5 |
| 10kΩ Resistors | 5 |
| 220Ω Resistors | 5 |
| 400-pt Breadboard | 1 |
| M-M Wires | 20 |
| 9V Battery Snap | 1 |
Who This Kit Is For
This kit is ideal for CBSE students working on agriculture electronics projects, B.Tech ECE/EEE students exploring automation, and participants of Smart India Hackathon building Agri-tech prototypes. It also fits ATL Tinkering Labs and college workshops that want to teach sensor-driven control systems hands-on.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code inside to chat with our AI companion, trained on this exact Greenhouse Climate Monitor project. You can also send a WhatsApp message to our support team for personalized help.
Can I use this kit outdoors in a real greenhouse?
The sensors and electronics are not weatherproof, but the circuit can be placed inside a protective enclosure near the plants. The relay can switch a standard 5V or external fan—just keep the Arduino and breadboard dry.
Does the kit include a fan or misting unit?
No, the kit includes the control electronics only: sensor, relay, LEDs, and Arduino. You can connect any small DC misting fan or sprayer to the relay to complete the automation.
What coding experience is needed?
None—beginner-friendly. The AI companion provides ready-to-upload code and explains each line. You’ll only need a computer with the free Arduino IDE installed.
Greenhouse — DHT11 monitors humidity inside a growing tent. Relay triggers misting fan when humidity is below threshold. LED shows zone status.
What's in this kit
- Arduino Uno R3
- DHT11
- 5V Relay Module
- 5mm Green LED x2
- 5mm Red LED x2
- 1N4007 Diode x5
- 10kΩ Resistors x5
- 220Ω Resistors x5
- 400-pt Breadboard
- M-M Wires x20
- 9V Battery Snap
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items