Pest Monitoring Camera Trap Kit - ESP32-CAM, LoRa
Build 3 Solar-Powered Pest Camera Traps That Identify Species and Sync Counts via LoRa
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
Deploy a network of three autonomous pest-monitoring camera traps across your farm. Each station uses a PIR motion sensor to detect insect or small animal movement, triggers a high-resolution image via the ESP32-CAM, and classifies the species locally with a pre-loaded model. Crop-specific pest counts are then transmitted over kilometre-scale LoRa links to a cloud dashboard-all sustained by solar power, so no cabling or frequent battery swaps are needed.
What You'll Build
You'll assemble and programme three weatherproof field units that operate independently for weeks. Each trap captures clear close-up photographs as pests pass through a focal area, counts individuals per species, and uploads daily totals. The aggregated dashboard gives you a real-time map of pest pressure across your orchard, farm, or polyhouse-actionable data without manual scouting.
What You'll Learn
- Configure ESP32-CAM to capture images on motion trigger using HC-SR501 PIR sensors
- Interface LoRa modules (RA-02) with Arduino Nano to transmit pest count data over kilometre-scale distances
- Design a solar charging circuit with TP4056 and 6V panels to sustain 18650 battery-powered nodes
- Assemble waterproof enclosures and prototype boards for reliable outdoor deployment
Kit Contents
| Component | Quantity |
|---|---|
| ESP32-CAM | 3 |
| Arduino Nano | 3 |
| RA-02 LoRa | 4 |
| HC-SR501 PIR | 3 |
| BH1750 | 3 |
| DS3231 RTC | 3 |
| MicroSD Module | 3 |
| 433MHz Antenna | 4 |
| Solar Panel 6V 1W | 3 |
| TP4056 Module | 3 |
| 18650 Cell | 3 |
| PCB Prototype Board | 4 |
| Waterproof Enclosures | 3 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
Tailored for B.Tech ECE and Agricultural Engineering students, ICAR researchers, Smart India Hackathon teams, and agri-tech startup founders building low-cost pest surveillance solutions. The step-by-step guidance assumes basic electronics and programming familiarity, making it a powerful tool for capstone projects and field trials across India.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project - accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code for the AI companion that walks you through every connection and code upload. For manual assistance, WhatsApp our support team - they've built this kit multiple times and can guide you over a short call or chat.
Can I add more trap nodes to the network?
Yes, the LoRa mesh supports up to 256 addresses. Order extra ESP32-CAM, sensor, and antenna sets (available separately), and the AI companion provides updated firmware configuration to integrate them.
Does the kit include image classification models?
The AI companion provides pre-trained TinyML models for five common pest species. You can retrain or extend the model using Edge Impulse or TensorFlow Lite, and the step-by-step guide shows you how.
How do I view the pest counts remotely?
Each node sends hourly totals via LoRa to a gateway (included in the kit). The gateway pushes data to a free cloud dashboard accessible on any browser. No recurring fees; the dashboard is part of the build.
Home Security - PIR + ESP32-CAM trap sensors photograph and count pests per species. LoRa uploads counts to cloud dashboard.
What's in this kit
- ESP32-CAM x3
- Arduino Nano x3
- RA-02 LoRa x4
- HC-SR501 PIR x3
- BH1750 x3
- DS3231 RTC x3
- MicroSD Module x3
- 433MHz Antenna x4
- Solar Panel 6V 1W x3
- TP4056 Module x3
- 18650 Cell x3
- PCB Prototype Board x4
- Waterproof Enclosures x3
- Soldering Iron
- Solder Wire
Choose your assembly option:
- Soldering Kit - 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo - 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Other projects you can build
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items