Industrial Boiler Temp Monitor Kit v2 — Build a Wireless Arduino-Powered Temperature & Sound Anomaly Alert System

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.

Industrial boilers often run in remote, high-noise environments where a failing pump or abnormal temperature spike goes unnoticed until it's too late. This kit lets you build a dual-node monitoring system: a transmitter that reads boiler temperature with a waterproof DS18B20 and listens for distress sounds via a MAX4466 mic, then sends wireless alerts to a receiver unit using NRF24L01 modules. The receiver displays live data on an OLED and triggers an active buzzer if thresholds are breached, giving maintenance teams a low-cost early warning network.

What You'll Build

You'll assemble two Arduino Nano-based nodes. The boiler-side transmitter samples temperature and sound, processing frequencies that match cavitation or bearing squeal patterns. The receiver station — placed on a parent monitoring panel — decodes NRF packets, shows real-time readings, and sounds an alarm instantly when anomalies are detected. The final setup can be housed in project enclosures and deployed in actual industrial test environments.

What You'll Learn

• Engineering a wireless sensor network using NRF24L01 radio modules and reliable packet framing
• Interfacing a waterproof DS18B20 one-wire temperature probe with noise-filtered readings
• Capturing and thresholding sound patterns with a MAX4466 electret mic amplifier for anomaly detection
• Designing a receiver UI with an OLED display and active buzzer alert logic

Kit Contents

Why Buy This Kit Instead of Sourcing Parts Separately

Who This Kit Is For

Engineered for advanced learners and professionals: B.Tech ECE/EEE students tackling final-year industrial IoT projects, Smart India Hackathon teams prototyping condition monitoring systems, and practitioners in industrial automation testing wireless sensor networks. The kit assumes soldering experience and familiarity with Arduino IDE. It fits right into NIT, VIT, BITS, and IIT project labs where reliable hardware and clear documentation matter.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

Choose your assembly option:

• Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
• Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.