Home › Pi Pico W Soil Moisture Irrigation Bot
Pi Pico W Soil Moisture Irrigation Bot - Compoden
In Stock

Pi Pico W Soil Moisture Irrigation Bot

SKU: CDN-KIT-1223 Brand: Compoden Category: Electronics > Raspberry Pi Projects > Project Kits
Rs. 1,650.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 85423100
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

Pico W Plant Watering Bot Kit: 2 Soil Sensors, Pump, MQTT — an intermediate-level kit.

Pico W Plant Watering Bot Kit: 2 Soil Sensors, Pump, MQTT

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Intermediate Build Time: 4-5 hrs Skill: IoT Sensor Integration & MQTT Logging

Kit at a glance

What you build: A plant watering bot: a Raspberry Pi Pico W watches two pots' soil moisture, runs a mini pump through a relay when either is dry, and publishes every reading and watering to MQTT, so you can check on your plants from your phone.

What's in the box

  • Raspberry Pi Pico W
  • Soil Moisture Sensor × 2
  • 5V Relay Module
  • Mini Submersible Pump
  • 0.96in OLED
  • 1N4007 Diode × 3
  • 10kΩ Resistors × 5
  • Silicone Tube 30cm
  • 400-pt Breadboard
  • M-M Wires × 25
  • Micro USB Cable

Power: USB. A USB charger is not included. A water container is not included.

Skill level: Intermediate (4-5 hours).

Frequently asked questions

Can it water two pots separately?

With one pump, split the tube or add a second pump and relay.

Does it need internet?

Only your Wi-Fi and an MQTT broker.

Create an autonomous irrigation system that never forgets to water your plants. Using two soil moisture sensors, this kit triggers a miniature pump when the earth turns dry—then logs every event over Wi-Fi via MQTT. You’ll have a complete, timestamped watering record accessible from any device on your network, perfect for balcony gardens, school science fairs, or prototyping a Smart India Hackathon solution.

What You'll Build

You’ll wire up a self-contained breadboard circuit with an OLED dashboard that shows real-time moisture percentages and pump status. The Raspberry Pi Pico W connects to your Wi-Fi and publishes structured MQTT messages each time irrigation runs. By the end, you’ll have a fully automated watering station that keeps plants healthy without manual checking.

What You'll Learn

  • Calibrating soil moisture sensors and setting precise threshold values for different plant needs
  • Controlling a relay and submersible pump with flyback protection using 1N4007 diodes
  • Programming the Pico W in MicroPython to connect to Wi-Fi and publish MQTT telemetry
  • Integrating an OLED display to show live sensor readings and system status

Kit Contents

Component Quantity
Raspberry Pi Pico W 1
Soil Moisture Sensor 2
5V Relay Module 1
Mini Submersible Pump 1
0.96in OLED 1
1N4007 Diode 3
10kΩ Resistors 5
Silicone Tube 30cm 1
400-pt Breadboard 1
M-M Wires 25
Micro USB Cable 1

Who This Kit Is For

Designed for CBSE students building IoT-based science projects, B.Tech ECE/EEE undergraduates exploring embedded automation, and Smart India Hackathon participants needing a rapid sensor-actuator demo. ATL Tinkering Lab facilitators will also find it an effective, hands-on way to teach MQTT protocols and sensor integration with immediate, visible results.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

What if I get stuck during the build?

Scan the QR code on the box to access the AI companion, which understands this specific circuit and code. You can also message us on WhatsApp for human guidance if you hit a snag.

Can I view the MQTT log on my phone?

Yes, install any MQTT client app like MQTT Dash on Android or use a web-based MQTT viewer. The Pico W publishes messages that any device on the same network can subscribe to.

Do I need to write all the code myself?

No—a pre-written MicroPython script with comments is included. The AI companion can help you modify thresholds or add features without starting from scratch.

Can this system water multiple pots?

With two sensors and one pump already in the box, you can monitor two separate plants. The AI companion can guide you on expanding to more sensors and relay channels using the same breadboard layout.

Soil moisture below threshold triggers relay pump. Pico W posts irrigation events to MQTT log.

What's in this kit

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →

How to set up your kit

See all how-to videos →