Pi Zero 2W Wireless Security Cam Kit with Raspberry Pi Zero + Camera
Build a Motion-Activated Wireless Security Camera with the Raspberry Pi Zero 2W Kit
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
Turn a Raspberry Pi Zero 2W into a pocket-sized security camera that streams crisp H264 video over your home Wi-Fi and records only when motion is detected. This advanced kit gives you every component, including a weatherproof enclosure and a rechargeable LiPo battery, so you can place your custom cam anywhere — monitoring a door, a lab bench, or a dorm room — without depending on USB power or cloud subscriptions.
What You'll Build
A fully portable wireless security camera that boots up, connects to Wi-Fi, and begins streaming a low-latency H264 feed to any browser or VLC player on your local network. Motion events are saved as timestamped video clips to the 32 GB microSD card, and the camera can run for hours on the included 2000 mAh battery. The weatherproof enclosure lets you deploy it outdoors under an eave or indoors in dusty spaces.
What You'll Learn
- Install and configure Raspberry Pi OS Lite for headless, power-efficient operation
- Set up the Pi Zero camera module via the GPIO ribbon and enable hardware-accelerated H264 encoding
- Write a Python script using picamera2 to capture H264 video and detect motion through frame differencing
- Create systemd services so streaming and motion-triggered recording start automatically when the board powers up
Kit Contents
| Component | Quantity |
|---|---|
| Raspberry Pi Zero 2W | 1 |
| Pi Zero Camera Module | 1 |
| TP4056 Module | 1 |
| 3.7V LiPo 2000mAh | 1 |
| 40-pin GPIO Header | 1 |
| M-F Wires | 15 |
| MicroSD Card 32GB | 1 |
| Weatherproof Enclosure | 1 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
This advanced kit is built for B.Tech ECE/EEE students looking for a capstone IoT project, participants of Smart India Hackathon who need a working surveillance prototype quickly, and electronics enthusiasts at IIT/NIT/VIT/BITS who want to deepen their embedded Linux skills. If you have already tinkered with a Raspberry Pi Pico or an Arduino and now want to harness the power of a full Linux board with camera streaming, soldering, and battery management, this kit gives you a structured pathway from component to finished device.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
The AI companion walks you through debugging step by step; if needed, message us on WhatsApp for direct assistance from the Compoden team.
Can this camera stream over the internet, not just local Wi-Fi?
Yes. The AI companion includes a guide for secure remote access via port forwarding or a tool like Dataplicity, so you can watch the feed from anywhere.
How long does the battery last while streaming?
With the 2000 mAh LiPo and power-efficient H264 encoding, expect about 3–4 hours of continuous streaming; motion-triggered recording can extend runtimes to over 8 hours.
Can I use a different camera module, like a NoIR one?
The kit is pre-tested with the standard Pi Zero Camera Module. The AI companion can help adapt scripts for a NoIR module if you swap it later, though that configuration is not part of the default project.
Pi Zero 2W streams live H264 video over WiFi to a remote viewer. Motion triggered recording to SD.
What's in this kit
- Raspberry Pi Zero 2W
- Pi Zero Camera Module
- TP4056 Module
- 3.7V LiPo 2000mAh
- 40-pin GPIO Header
- M-F Wires x15
- MicroSD Card 32GB
- Weatherproof Enclosure
- Soldering Iron
- Solder Wire
Choose your assembly option:
- Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Other projects you can build
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items