UV-Lux Kit with Arduino Nano + Sensors
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
UV-Lux Kit with Arduino Nano + Sensors — a intermediate-level build.
Build a UV and Light Meter with Arduino Nano, GUVA-S12SD, BH1750 and an OLED
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Two sensors, one screen: the GUVA-S12SD reads ultraviolet light and the BH1750 reads visible light in lux. Carry it outdoors and indoors and compare sun, shade, window light and lamps side by side on the OLED.
What You'll Build
You connect the GUVA-S12SD to an analog pin on the Arduino Nano, and the BH1750 and the 0.96 inch OLED to the I2C bus. The sketch reads both sensors, converts the UV output to a relative UV level and shows it next to the lux value, with simple labels for indoor and outdoor light.
What You'll Learn
- Reading an analog UV sensor
- Reading lux from a BH1750 over I2C
- Sharing one I2C bus between a sensor and a display
- Designing a clear two-value OLED screen
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Nano (CH340 clone) | 1 |
| GUVA-S12SD UV Sensor Module | 1 |
| GY-30 BH1750FVI Light Intensity Sensor Module | 1 |
| 0.96 inch OLED Display Module 128x64 I2C Yellow/Blue (SSD1306) | 1 |
| 400-point solderless breadboard | 1 |
| Dupont Jumper Wire Kit (M-M, M-F, F-F, 20cm, 22AWG) | 1 |
Who This Kit Is For
Makers and science-project builders interested in light, plants or the outdoors. The readings are for learning and comparison, not a medical or sun-safety device.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
Does it measure the UV index exactly?
No. The GUVA-S12SD gives a relative UV reading. Use it to compare places and times, and use official forecasts for sun safety.
Can both I2C parts share the same pins?
Yes. The BH1750 and the OLED have different addresses, so they share SDA and SCL.
What is lux?
A measure of visible light falling on a surface. Daylight outdoors is many times brighter than a well-lit room.
Arduino Nano light meter with a GUVA-S12SD UV sensor and a BH1750 lux sensor, both shown on an OLED.
What's in this kit
Do you deliver across India?
Yes. We ship UV-Lux Kit with Arduino Nano + Sensors across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Orders ship in 3-7 days.
What payment options are available for UV-Lux Kit with Arduino Nano + Sensors?
We accept UPI, all major debit and credit cards, and Cash on Delivery (COD) available.
Built and shipped from Compoden, with UPI and cards, plus COD available.
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items