Home › Arduino Water Quality Monitoring Kit: TDS, pH & Turbidity Sensor
Arduino Water Quality Monitoring Kit: TDS, pH & Turbidity Sensor - Compoden
In Stock

Arduino Water Quality Monitoring Kit: TDS, pH & Turbidity Sensor

SKU: CDN-KIT-1469-CL Brand: Compoden Category: Electronics > Beginner Arduino Projects > Project Kits
Rs. 3,810.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 90230090
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

Arduino Water Quality Monitoring Kit: TDS, pH & Turbidity Sensor — an intermediate-level kit.

Water Quality Monitor Kit: Build an Arduino TDS, pH & Turbidity Meter to Compare Water Sources

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Intermediate Build Time: 3-4 hrs Skill: Sensor Calibration & Composite Water Quality Logic

Turn your Arduino Uno into a portable water comparison station. This kit brings together the three most critical water parameters — TDS/EC, pH, and turbidity — and lets you compare any sample against your chosen limits with a single glance at the LCD. Whether you're checking your tap water, a school filter, or a local borewell, you'll have clear, sensor-driven readings you can compare against the BIS IS 10500 TDS limits.

What You'll Build

A compact, battery-operated monitor that reads TDS (total dissolved solids), pH, and turbidity in sequence, then displays all values on a bright 16x2 LCD along with a simple “WITHIN LIMIT” or “ABOVE LIMIT” flag for each reading. You'll calibrate each sensor with the included reference powders and standard solutions, wire everything on a breadboard, and load the pre-written Arduino sketch. In under four hours, you'll be testing real water samples and comparing water sources with real data.

What You'll Learn

  • Calibrate a TDS/EC meter probe and analog pH electrode using buffer solutions
  • Connect and read multiple analog sensors via the Arduino Uno’s ADC pins
  • Drive a 16x2 LCD through an I2C backpack to reduce wiring clutter
  • Implement composite logic that weighs TDS, pH, and turbidity against limits you set

What the readings mean: This kit measures dissolved solids (TDS) to compare water sources; it is not a drinking-water safety test. TDS, pH and turbidity readings cannot detect bacteria, arsenic, lead, nitrates or pesticides. For reference, BIS IS 10500 sets 500 mg/L as the acceptable TDS limit and 2000 mg/L as the permissible limit when no other source is available; only a certified lab test can tell you whether water is safe to drink.

Kit Contents

Component Quantity
Arduino Uno R3 1
TDS EC Meter 1
Analog pH Module 1
Turbidity Sensor 1
16x2 LCD 1
I2C Backpack 1
10kΩ Resistors 5
100nF Capacitors 5
400-pt Breadboard 1
Male-to-Male Jumper Wires 25
9V Battery Snap 1

Who This Kit Is For

Ideal for CBSE students preparing science exhibition models that demonstrate applied chemistry and electronics. ATL Tinkering Labs can deploy it for hands-on environmental monitoring modules, while B.Tech ECE/EEE students gain practical sensor instrumentation experience. Smart India Hackathon teams focusing on clean water access will find it a ready-to-extend platform.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

What if I get stuck during the build?

Scan the QR code on the box to chat with our AI build companion, trained specifically for this Water Quality Monitor. If you prefer, message us on WhatsApp and our hardware team will guide you.

How do I calibrate the pH and TDS sensors?

The kit includes pH buffer powders and a TDS reference solution. The AI companion walks you through each calibration step, from solution preparation to adjusting the Arduino sketch’s offset values.

Can I test water from any source?

Yes, tap water, well water, river water, or filtered water are all testable. Avoid samples with heavy sediment that could block the turbidity sensor chamber; let suspended solids settle first.

Is this kit suitable for a school science fair?

Absolutely. The LCD provides immediate visual feedback, and the within-limit / above-limit flags make the project highly presentable. Judges appreciate the real-world application of physics and chemistry to India’s drinking water challenges.

TDS EC + pH + turbidity combined on LCD with a within-limit / above-limit flag per reading.

What's in this kit

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →