Home › ESP32-S3 Wake Word Voice Control Kit with ESP32 + Relay
ESP32-S3 Wake Word Voice Control Kit with ESP32 + Relay - Compoden
In Stock

ESP32-S3 Wake Word Voice Control Kit with ESP32 + Relay

SKU: CDN-KIT-1328 Brand: Compoden Category: Electronics > ESP32 Fundamentals > Project Kits
Rs. 1,910.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 90230090
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

ESP32-S3 Wake Word Voice Control Kit with ESP32 + Relay — an intermediate-level kit.

ESP32-S3 Wake Word Voice Control Kit – Build a Relay That Listens Without the Cloud

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Intermediate Build Time: 3-4 hrs Skill: Offline voice processing & relay control

Kit at a glance

What you build: A wake-word switch: an INMP441 microphone listens and an ESP32-S3 waits for your chosen wake word, then switches a relay, all offline. Three LEDs show listening, heard and switched.

What's in the box

  • ESP32-S3 Dev Board
  • INMP441 I2S Mic
  • 5V Relay Module
  • 5mm LED × 3
  • 1N4007 Diode × 3
  • 4.7kΩ Resistors × 5
  • 400-pt Breadboard
  • M-M Wires × 20
  • USB-C Cable

Power: USB (cable included).

Skill level: Intermediate (3-4 hours, no soldering).

Frequently asked questions

Does it need the internet?

No. Wake-word detection runs on the ESP32-S3.

Can I pick my own word?

Yes, from the supported wake words or by training your own.

What can the relay switch?

Low-voltage loads while learning.

Command a light, fan, or any appliance using your voice — with zero internet connectivity. This kit guides you through building a completely edge-based voice trigger, using the ESP32-S3's neural network accelerator to detect a custom wake word like “Hey Compoden” and instantly toggle a relay. No cloud, no Wi‑Fi, just pure on‑device intelligence that responds the moment you speak.

What You'll Build

A fully functional voice‑activated relay module that springs into action the moment it hears your designated wake word. The relay closes, the indicator LEDs show the state, and the entire system runs offline — perfect for privacy‑conscious home automation, assistive devices, or IoT prototypes that must work without a network.

What You'll Learn

  • Train a custom wake word using ESP‑SR and deploy it on the ESP32‑S3 neural network
  • Interface an INMP441 I2S MEMS microphone for low‑noise audio capture
  • Drive a 5V relay with flyback diode protection for safe appliance control
  • Process real‑time audio and run inference entirely on the edge using ESP‑NN

Kit Contents

Component Quantity
ESP32-S3 Dev Board 1
INMP441 I2S Mic 1
5V Relay Module 1
5mm LED 3
1N4007 Diode 3
4.7kΩ Resistors 5
400-pt Breadboard 1
M-M Wires 20
USB-C Cable 1

Who This Kit Is For

CBSE students diving into IoT and embedded systems, B.Tech ECE/EEE undergraduates prototyping automation projects, Smart India Hackathon participants who need a privacy‑preserving voice interface, and ATL Tinkering Lab mentors looking for a ready‑to‑assemble module that demonstrates real edge AI.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

What if I get stuck during the build?

Scan the QR code on the box to chat with your AI companion, trained specifically on this wake‑word relay project. For additional help, our team is available on WhatsApp.

Can I use the kit to switch AC appliances directly?

Yes. The included 5V relay is rated for AC loads up to 250V at 10A. Always wire the 1N4007 flyback diode and follow the safety guidelines we provide for high‑voltage connections.

Do I need to code the wake word detection from scratch?

No. We supply ready‑to‑upload Arduino sketches and a Python script that converts your recorded wake word sample into an ESP‑SR compatible model — no low‑level DSP coding required.

Is the wake word truly offline or does it use cloud speech-to-text?

Everything runs locally on the ESP32‑S3’s neural network accelerator. The audio from the INMP441 mic never leaves the chip, so the kit works perfectly with zero internet access.

ESP32-S3 WakeNet detects a custom wake word offline. Triggers relay on detection without cloud.

What's in this kit

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →

How to set up your kit

See all how-to videos →