Home › Home Brewing Temperature Monitor Kit with Arduino Uno
Home Brewing Temperature Monitor Kit with Arduino Uno - Compoden
In Stock

Home Brewing Temperature Monitor Kit with Arduino Uno

SKU: CDN-KIT-3624-CL Brand: Compoden Category: Electronics > School & STEM Projects > Project Kits
Rs. 1,320.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 90230090
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

Brewing Water Mineral Checker Kit: Uno, TDS Sensor, DS18B20 — a beginner-level kit.

Brewing Water Mineral Checker Kit: Uno, TDS Sensor, DS18B20

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Beginner Build Time: 2-3 hrs Skill: Sensor integration & water analysis

Kit at a glance

What you build: A brewing water checker: a TDS sensor measures the dissolved minerals in your brewing water and a DS18B20 corrects for temperature, and an Arduino Uno shows the result in ppm on an LCD so you can compare tap, filtered and bottled water before you brew.

What's in the box

  • Arduino Uno R3
  • TDS EC Meter
  • DS18B20 Waterproof
  • 16x2 LCD
  • I2C Backpack
  • 4.7kΩ Resistors × 5
  • 10kΩ Resistors × 5
  • 400-pt Breadboard
  • M-M Wires × 20
  • 9V Battery Snap

Power: 9V battery, not included.

Skill level: Beginner (2-3 hours, no soldering).

Frequently asked questions

Why do minerals matter in brewing?

They change how the brew tastes and ferments.

Does it measure the brew's temperature?

The DS18B20 is there to correct the TDS reading.

Home brewing isn't just about boiling grains—water chemistry makes or breaks the batch. This kit lets you build a handheld monitor that reads both temperature and total dissolved solids (TDS) in any water sample, then displays the values side-by-side on a clear LCD. Test tap water, RO water, mineral water, or even rainwater to see how "soft" or "hard" the water really is—exactly what brewers need to adjust mash pH and mineral content.

What You'll Build

You'll wire up an Arduino Uno with a waterproof TDS EC meter and a DS18B20 temperature probe, both submersible safely in water. The readings appear instantly on a 16x2 LCD, powered through an I2C backpack. Dip the sensors into a glass of water, press the button, and watch real-time TDS (in ppm) and temperature (in °C) flash up. Calibrate with the included standard solution and compare soft water (like rainwater, ~10-50 ppm) against hard water (like borewell water, often 300+ ppm). Enclosure ideas are shared in the build companion to turn this into a permanent brew-day gadget.

What You'll Learn

  • How to interface analog (TDS) and digital one-wire (DS18B20) sensors with Arduino
  • Reading and mapping sensor data to human-readable TDS ppm values using a voltage-to-conductivity formula
  • Displaying multiple parameters on a character LCD via I2C, reducing pin usage
  • Practical water chemistry concepts: why dissolved minerals affect brewing, plant growth, and electronics

Kit Contents

Component Quantity
Arduino Uno R3 1
TDS EC Meter 1
DS18B20 Waterproof 1
16x2 LCD 1
I2C Backpack 1
4.7kΩ Resistors 5
10kΩ Resistors 5
400-pt Breadboard 1
M-M Wires 20
9V Battery Snap 1

Who This Kit Is For

Students exploring CBSE physics or chemistry projects, B.Tech ECE/EEE students building sensor-based prototypes, and ATL Tinkering Lab participants will find this practical introduction to water-quality instrumentation. Home brewing hobbyists—from IIT/NIT/BITS hostels to family kitchens—get a lasting tool to dial in their water profile. The build is plug-and-play on a breadboard, so you can complete it with minimal coding experience using the AI companion's guided steps.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

What if I get stuck during the build?

Open the AI companion from the QR code—it walks through wiring, code upload, and calibration. If you need human help, WhatsApp us directly from the contact card inside the box.

Can this kit measure EC as well as TDS?

Yes, the TDS meter outputs an analog voltage proportional to electrical conductivity (EC). The companion code calculates both TDS in ppm and EC in µS/cm, so you can switch between units.

Is this safe for food-grade brewing?

The sensors are waterproof and food-safe for occasional immersion. For continuous fermentation monitoring, you can extend the probes with a thermowell—instructions are in the companion guide.

How do I compare soft and hard water?

Fill two glasses—one with RO water and one with tap water. Dip the sensor, record readings. The LCD will clearly show the TDS difference, helping you understand mineral content for mash chemistry adjustments.

Brewing — TDS EC sensor measures dissolved minerals in different water samples. Compare soft vs hard water.

What's in this kit

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →

How to set up your kit

See all how-to videos →