Vehicle GPS Tracker Kit with Arduino Nano
Vehicle GPS Tracker Kit with Arduino Nano – Live Position on aprs.fi
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
Track any vehicle — be it a car, bike, or even a high-altitude balloon — in real time on aprs.fi with this self-built wireless tracker. The kit combines an Arduino Nano, NEO-6M GPS module, and a long-range HC-12 433MHz radio to format and transmit position data as standard APRS packets. No cellular network, no subscription fees — just RF communication over several kilometres.
What You'll Build
You’ll assemble a compact, battery-powered GPS tracker that reads coordinates from the NEO-6M, processes them with Arduino Nano, and sends them over a 433MHz HC-12 radio link. The data appears as a moving icon on the aprs.fi worldwide map, allowing you to monitor vehicle location from any browser. The weatherproof enclosure ensures it’s ready for field deployment on a motorbike or car dashboard.
What You'll Learn
- Parsing NMEA sentences from GPS modules to extract latitude, longitude, altitude, and speed
- Formatting position data into APRS protocol packets (AX.25 frame structure)
- Configuring HC-12 433MHz radio modules for long-range data transmission
- Integrating GPS, radio, and power management on a custom PCB breadboard and soldering circuit
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Nano | x1 |
| HC-12 433MHz | x1 |
| NEO-6M GPS | x1 |
| 433MHz Antenna | x1 |
| 3.7V LiPo 1000mAh | x1 |
| TP4056 Module | x1 |
| 100nF Caps | x5 |
| PCB Prototype Board | x2 |
| Waterproof Enclosure | x1 |
| Soldering Iron | x1 |
| Solder Wire | x1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
This kit is built for intermediate makers: B.Tech ECE/EEE students building a practical wireless tracking system for campus projects, Smart India Hackathon teams tackling vehicle tracking challenges, and ATL Tinkering Lab mentors guiding advanced school students. If you’ve already written basic Arduino code and soldered a few circuits, you’re ready.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code to open the AI companion trained on this specific kit, which guides you through wiring, code upload, and troubleshooting. If you still need help, our WhatsApp support responds within hours.
What range can I expect from the HC-12 radio?
In open areas, the HC-12 433MHz module reliably transmits up to 1.5 km with the included antenna. Range varies with terrain and obstacles; line-of-sight yields the best results.
Do I need a Ham radio license to use this tracker?
In India, operating on 433MHz for low-power devices typically falls under license-free ISM band usage. However, for APRS transmissions, you should check local regulations; this kit is intended for experimental and educational use.
Can I track the vehicle if there’s no internet at the receiver?
The tracker transmits raw APRS packets via radio. You need an internet-connected receiver (e.g., another HC-12 connected to a computer with internet) to feed data to aprs.fi. The kit includes only the mobile transmitter.
Vehicle — NEO-6M GPS position formatted as APRS packet and transmitted over HC-12 radio. Visible on aprs.fi map.
What's in this kit
Choose your assembly option:
- Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items