Raspberry Pi Zero Driver Health Wearable Kit - Crash & SpO2
Build a Driver Safety Wearable: Raspberry Pi Zero Kit with SpO2 & Crash Detection
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
Imagine a compact wearable that clips to a driver's wrist, continuously logging blood oxygen and sudden deceleration - data that could one day trigger emergency alerts. This kit equips you with every component to prototype that exact device, fusing health monitoring with crash detection on a Raspberry Pi Zero W. Whether you're building for Smart India Hackathon or an automotive safety seminar at your engineering campus, you'll create a self-contained, battery-powered logger that captures real-world sensor fusion.
What You'll Build
You'll assemble a wrist-worn module that reads SpO2 via MAX30102 and acceleration via MPU6050 every 5 minutes, storing time-stamped logs to a 16GB MicroSD card. An OLED display gives instant feedback on sensor status and system health. Powered by a rechargeable LiPo battery with TP4056 charge management, the entire unit runs autonomously - no tethered laptop needed.
What You'll Learn
- Interfacing I2C sensors (MAX30102, MPU6050, OLED) with Raspberry Pi Zero W using Python
- Writing a periodic data-logging loop that writes to SD card with minimal power consumption
- Designing a battery-powered wearable system with LiPo and TP4056 safe charging
- Implementing crash-detection logic through accelerometer threshold algorithms
Kit Contents
| Component | Quantity |
|---|---|
| Raspberry Pi Zero W | 1 |
| MAX30102 Pulse Oximeter Sensor | 1 |
| MPU6050 Gyro-Accelerometer | 1 |
| 0.96in OLED Display | 1 |
| TP4056 Charging Module | 1 |
| 3.7V LiPo 1000mAh Battery | 1 |
| 4.7k? Resistors | 5 |
| 40-pin GPIO Header | 1 |
| Male-to-Female Jumper Wires | 20 |
| 16GB MicroSD Card | 1 |
| Velcro Strap | 1 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
Designed for B.Tech ECE, EEE, and Embedded Systems students across IIT, NIT, VIT, and BITS campuses who need a compact, self-contained project for hackathons like Smart India Hackathon or final-year submissions. It's also ideal for ATL Tinkering Lab mentors guiding advanced automotive IoT projects. If you've programmed in Python and wielded a soldering iron, this kit elevates your wearable design skills into real-world driver safety.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project - accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code on the box to access your AI build companion, pre-trained on this exact project. If you still need human help, our WhatsApp support replies within 6 hours.
Can this device really detect a vehicle crash?
Yes, the MPU6050 accelerometer continuously monitors for rapid deceleration events. When thresholds are exceeded, the Pi logs a timestamp and G-force data to the SD card, ready for post-crash analysis.
How long does the battery last during monitoring?
The 1000mAh LiPo provides approximately 8-10 hours of runtime with the sensors sampling every 5 minutes and the OLED on low brightness. The TP4056 module allows easy recharging from any USB power source.
Do I need prior soldering experience?
Basic soldering is required to attach the GPIO header to the Pi Zero W and secure sensor connections. The kit includes a soldering iron and solder wire, and the AI companion provides a step-by-step soldering guide with photos.
Automotive Safety - Pi Zero W reads MAX30102 SpO2 and MPU6050 activity every 5 minutes to SD card as a wearable health tracker.
What's in this kit
Choose your assembly option:
- Soldering Kit - 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo - 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Other projects you can build
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items