Aquarium Temperature Monitor Pro Kit with Arduino Uno
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Aquarium Temperature + TDS Monitor Kit: Arduino Uno, LCD — a beginner-level kit.
Aquarium Temperature + TDS Monitor Kit: Arduino Uno, LCD
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: An aquarium water monitor: a DS18B20 probe tracks the tank temperature and a TDS sensor measures dissolved solids, and an Arduino Uno shows both on a 16x2 LCD, so you can see when a water change is due.
What's in the box
- Arduino Uno R3
- TDS EC Meter
- 16x2 LCD
- I2C Backpack
- DS18B20 Waterproof
- 4.7kΩ Resistors × 5
- 400-pt Breadboard
- M-M Wires × 20
- 9V Battery Snap
Power: 9V battery, not included.
Skill level: Beginner (2-3 hours, no soldering).
Frequently asked questions
Why measure TDS in an aquarium?
Dissolved solids build up between water changes; a rising number is a reminder.
Can the probes stay in the tank?
The DS18B20 can. Dip the TDS probe for readings rather than leaving it in.
This kit lets you build a compact monitor that shows both temperature and TDS/EC values on a backlit LCD, then instantly flags whether the TDS reading is above the limit you set. It turns a practical monitoring need into a complete learn-by-doing sensor project.
What You'll Build
You will assemble a breadboard-based instrument that reads the DS18B20 waterproof probe for aquarium temperature and the TDS EC meter for dissolved solids. The 16x2 LCD with I2C backpack displays live readings and a clear WITHIN or ABOVE status when your water sample exceeds 500 ppm—the BIS IS 10500 acceptable TDS limit. A 9V battery makes the entire unit portable for spot-checks around multiple tanks.
What You'll Learn
- Interface the DS18B20 waterproof temperature sensor and parse its 1-Wire data for stable aquarium readings
- Measure water purity with the TDS EC meter and scale the analog output to ppm using calibration math
- Display real-time temperature, TDS, and a limit-check message on a 16x2 LCD via I2C backpack without messy wiring
- Implement a decision logic in Arduino code to compare sensor values against a TDS limit (500 mg/L by default, the BIS IS 10500 acceptable limit)
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | 1 |
| TDS EC Meter | 1 |
| 16x2 LCD | 1 |
| I2C Backpack | 1 |
| DS18B20 Waterproof | 1 |
| 4.7kΩ Resistors | 5 |
| 400-pt Breadboard | 1 |
| M-M Wires | 20 |
| 9V Battery Snap | 1 |
Who This Kit Is For
CBSE students tackling sensor-based physics and electronics projects, first-year B.Tech ECE/EEE learners exploring embedded systems, and ATL Tinkering Lab teams preparing for Smart India Hackathon water-quality challenges will all find this kit a perfect starting point. Aquarium enthusiasts who want a DIY monitoring tool will also appreciate the real-world application.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Aquarium — TDS EC sensor tests water samples and compares to a 500 ppm TDS limit on LCD.
What's in this kit
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items