Asset Tracking Tag with LoRa
Build a LoRa Asset Tracking Tag with Arduino Nano & GPS — Live Tracker Kit
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
This kit puts a real-time GPS tracking tag in your hands — a battery-powered unit that sends precise location data over LoRa radio, and a receiving station that displays the coordinates on an OLED screen. Designed for advanced makers, it solves the core challenge of remote asset monitoring without relying on cellular networks or Wi-Fi. Use it to track vehicles, equipment, or campus belongings across a security perimeter.
What You'll Build
You will construct a portable tracking tag that reads GPS coordinates from the NEO-6M module, encodes them, and transmits the data every 30 seconds via the RA-02 SX1278 LoRa transceiver. The gateway receiver, built with a second Arduino Nano and RA-02, decodes the transmission and shows latitude, longitude, and time on the 0.96-inch OLED. The entire tag runs on a rechargeable 3.7V LiPo battery with a TP4056 charging module, giving you a standalone surveillance tool that can operate for hours in the field.
What You'll Learn
- Program Arduino Nano for serial communication with GPS and LoRa modules
- Configure RA-02 SX1278 modules for point-to-point LoRa data transmission at 433 MHz
- Decode NMEA sentences from a NEO-6M GPS receiver and parse real-time location data
- Power a portable security device with a LiPo battery and TP4056 charging module
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Nano | 2 |
| RA-02 LoRa SX1278 | 2 |
| NEO-6M GPS | 1 |
| 433MHz Antenna | 2 |
| 0.96in OLED | 1 |
| 3.7V LiPo 1000mAh | 1 |
| TP4056 Module | 1 |
| 100nF Capacitors | 10 |
| 4.7kΩ Resistors | 5 |
| PCB Prototype Board | 2 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
This kit is designed for B.Tech ECE, EEE, and IoT engineering students working on final-year projects or Smart India Hackathon challenges. It also suits hobbyists building private security systems and research labs prototyping low-cost asset monitoring networks on campuses like IIT, NIT, VIT, or BITS Pilani.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code on the box to access the AI companion, which walks through each step. You can also reach us on WhatsApp for direct troubleshooting.
How far can the LoRa transmission reach?
In open line-of-sight conditions, the RA-02 modules can cover 2–5 km with the included helical antenna. Urban range is typically 500 m to 1 km, suitable for campus or compound monitoring.
Can I modify the transmission interval?
Yes, the Arduino code provided allows you to change the send frequency. For battery conservation, you can increase the interval or add motion-triggered updates by connecting a sensor (not included).
Is this kit suitable for a college final-year project or hackathon?
Absolutely. The LoRa asset tracking system demonstrates wireless communication, GPS data parsing, and low-power design, making it a solid exhibit for ECE/IoT evaluations or Smart India Hackathon demonstrations.
Arduino Nano + RA-02 LoRa transmits GPS coordinates every 30 seconds from asset to gateway receiver.
What's in this kit
Choose your assembly option:
- Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items