Baby Room Comfort Monitor Kit v15
Baby Room Comfort Monitor Kit — Build a LoRaWAN Sensor Network for Infant Care
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
New parents can monitor a baby’s room conditions without placing a smartphone in the cradle. This kit turns a Raspberry Pi Zero W into a Chirpstack LoRaWAN gateway and uses an Arduino Nano-based node to report temperature and humidity wirelessly. The decoded payload lands in InfluxDB, letting you build a dashboard to track comfort trends over time.
What You'll Build
You’ll assemble a battery-safe sensor node that reads the DHT22 and transmits data via RA‑02 LoRa to the Chirpstack server running on the Pi. Once the over‑the‑air activation handshake completes, every reading is stored in InfluxDB. From any laptop or phone on your local network, you can pull up a real‑time graph of the baby’s room climate.
What You'll Learn
- Configure a Chirpstack LoRaWAN network server on Raspberry Pi Zero W
- Set up over‑the‑air activation (OTAA) for a LoRa node using Arduino
- Ingest sensor data into InfluxDB and build a time‑series dashboard
- Solder a low‑power wireless sensor module on a prototype board
Kit Contents
| Component | Quantity |
|---|---|
| Raspberry Pi Zero W | x1 |
| Arduino Nano | x1 |
| RA-02 LoRa | x1 |
| DHT22 | x1 |
| 433MHz Antenna | x1 |
| 100nF Caps | x5 |
| PCB Prototype Board | x2 |
| MicroSD Card 16GB | x1 |
| Micro USB Cable | x1 |
| Soldering Iron | x1 |
| Solder Wire | x1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
This intermediate kit is designed for Class 11‑12 CBSE students building IoT coursework, B.Tech ECE/EEE undergrads prototyping a wireless health monitor, and Smart India Hackathon teams needing a ready‑to‑deploy LoRaWAN sensor. ATL tinkering labs can use it to demonstrate a complete edge‑to‑dashboard data pipeline with zero cloud dependency.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
The QR code on the box opens an AI companion trained on this exact project. You can also send a WhatsApp message; our engineers reply within 24 hours.
Do I need Wi‑Fi in the baby’s room?
No. The sensor node communicates over LoRa, so you can place it anywhere within range of the gateway (typically 500m indoors) without connecting to home Wi‑Fi.
Can I view the data on my phone?
Yes. The InfluxDB instance on the Raspberry Pi serves a web dashboard accessible from any device on your local network, and you can set up port forwarding for remote access.
Is this kit safe to use near a baby?
Absolutely. The sensor node runs on low‑voltage DC power and contains no exposed high‑temperature parts. Place the enclosure out of reach, such as on a shelf.
Infant Care — Raspberry Pi Zero W runs Chirpstack. RA-02 node joins via OTAA. Decoded payload stored in InfluxDB.
What's in this kit
Choose your assembly option:
- Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items