Nursery Climate Gauge Panel Kit: Uno, DHT22, BH1750, TFT
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Nursery Climate Gauge Panel Kit: Uno, DHT22, BH1750, TFT — a beginner-level kit.
Nursery Climate Gauge Panel Kit: Uno, DHT22, BH1750, TFT
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A nursery climate gauge panel: an Arduino Uno draws three gauges on a 1.8-inch colour TFT at once, showing temperature and humidity (DHT22), air pressure (BMP280) and light level (BH1750), so you can see if the room is too warm, dry or bright at bedtime.
What's in the box
- Arduino Uno R3
- DHT22
- BMP280
- BH1750
- 1.8in TFT ST7735
- 4.7kΩ Resistors × 10
- 100nF Caps × 10
- 400-pt Breadboard
- M-M Wires × 25
- 9V Battery Snap
Power: 9V battery, not included.
Skill level: Beginner (2-3 hours, no soldering).
Frequently asked questions
Is it a baby monitor?
No. It shows room conditions only.
Why light?
A bright room at bedtime shows up on the light gauge.
This kit lets you build a real-time monitor that shows temperature, humidity, pressure, and light on a TFT screen. Using the Arduino Uno and sensors, you’ll see three clean gauges updating instantly.
What You'll Build
You’ll assemble a compact monitoring station that draws three analog-style gauges simultaneously on a 1.8-inch TFT: temperature and humidity from DHT22, atmospheric pressure from BMP280, and ambient light from BH1750. Place it in the nursery and know at a glance if the room is too warm, damp, or dim.
What You'll Learn
- Connecting DHT22, BMP280, and BH1750 sensors to Arduino Uno
- Drawing analog-style gauge graphics on the TFT display using the ST7735 library
- Combining multiple sensor readings into a single real-time dashboard
- Understanding room comfort ranges and monitoring temperature, humidity,
DHT22, BMP280 and BH1750 displayed as three gauges on TFT simultaneously. Clean dashboard layout.
What's in this kit
- Arduino Uno R3
- DHT22
- BMP280
- BH1750
- 1.8in TFT ST7735
- 4.7kΩ Resistors x10
- 100nF Caps x10
- 400-pt Breadboard
- M-M Wires x25
- 9V Battery Snap
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items