ESP32 Deep Sleep Battery Kit: DHT22, 2000mAh LiPo, TP4056
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
ESP32 Deep Sleep Battery Kit: DHT22, 2000mAh LiPo, TP4056 — a beginner-level kit.
ESP32 Deep Sleep Battery Kit: DHT22, 2000mAh LiPo, TP4056
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A deep-sleep battery node: an ESP32 wakes every 15 minutes, reads a DHT22, posts the reading to a free cloud chart over Wi-Fi and goes back to deep sleep, running from a 2000mAh LiPo charged through a TP4056. Measure how long the battery really lasts.
What's in the box
- ESP32 Dev Board
- DHT22
- 3.7V LiPo 2000mAh
- TP4056 Module
- 10kΩ Resistors × 5
- 400-pt Breadboard
- M-M Wires × 15
- 1N5819 Diode × 3
Power: 2000mAh LiPo included, charged through the TP4056.
Skill level: Beginner (3-4 hours).
Frequently asked questions
How long will the battery last?
Measure it: a dev board's USB chip and regulator draw power even in deep sleep, so expect weeks rather than months.
How do I go further?
Use a bare module without the USB chip.
This kit makes that vision a reality for school projects, smart agriculture, and home environment monitoring.
What You'll Build
You'll assemble a self-contained wireless sensor node that reads the DHT22 sensor every 15 minutes, sends the data to a cloud chart service's free IoT platform, and then enters deep sleep to conserve battery. The included code and wiring diagrams make it plug-and-play – no prior coding experience needed.
What You'll Learn
- Programming the ESP32 to alternate between active mode and deep sleep for ultra-low power consumption
- Interfacing digital temperature-humidity sensors (DHT22) with microcontrollers
- Uploading sensor data to cloud platforms like a cloud chart service for remote monitoring
- Battery management using TP4056 charging module and 3.7V LiPo cells
Kit Contents
| Component | Quantity |
|---|---|
| ESP32 Dev Board | 1 |
| DHT22 | 1 |
| 3.7V LiPo 2000mAh | 1 |
| TP4056 Module | 1 |
| 10kΩ Resistors | 5 |
| 400-pt Breadboard | 1 |
| M-M Wires | 15 |
| 1N5819 Diode | 3 |
ESP32 wakes every 15 minutes, reads DHT22, posts to a cloud chart service and goes back to deep sleep.
What's in this kit
- ESP32 Dev Board
- DHT22
- 3.7V LiPo 2000mAh
- TP4056 Module
- 10kΩ Resistors x5
- 400-pt Breadboard
- M-M Wires x15
- 1N5819 Diode x3
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items