Garden Microclimate Recorder
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Garden Microclimate Recorder Kit: Uno, DHT22, LDR, EEPROM — a beginner-level kit.
Garden Microclimate Recorder Kit: Uno, DHT22, LDR, EEPROM
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A garden microclimate recorder: an Arduino Uno reads temperature, humidity (DHT22) and light (LDR) every 15 minutes and stores them with DS3231 timestamps in its built-in EEPROM memory, which you download later over the serial monitor.
What's in the box
- Arduino Uno R3
- DHT22
- LDR
- DS3231 RTC
- 10kΩ Resistors × 10
- 400-pt Breadboard
- M-M Wires × 20
- 9V Battery Snap
Power: 9V battery, not included.
Skill level: Beginner (2-3 hours, no soldering).
Frequently asked questions
How many readings fit?
The Uno's 1KB EEPROM holds a few days at 15-minute intervals.
Why no SD card?
It's a lesson in using the board's own memory.
Your garden tells a story through temperature swings, humidity shifts, and changing light levels — and this kit lets you capture it all. Whether you’re monitoring a terrace patch of coriander, a school’s botanical corner, or a small farm plot, you’ll assemble a standalone recorder that logs readings every 15 minutes onto onboard EEPROM. Later, just plug into a computer via USB and download the data as a clean CSV file for analysis, no external storage or cloud needed.
What You'll Build
You’ll wire up a DHT22 sensor, an LDR light sensor, and a real-time clock to an Arduino Uno, then upload code that timestamps and stores climate data directly in the microcontroller’s memory. The finished gadget runs on a 9V battery and sits quietly in your garden shed or against a window, building a detailed log you can retrieve anytime. It’s a self-contained microclimate station that turns raw sensor signals into a genuine scientific record.
What You'll Learn
- Interface digital (DHT22) and analog (LDR) sensors with Arduino
- Use the DS3231 RTC module to add accurate timestamps
- Write data to EEPROM and manage memory constraints
- Download logged data over serial and convert to CSV
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | 1 |
| DHT22 | 1 |
| LDR | 1 |
| DS3231 RTC | 1 |
| 10kΩ Resistors | 10 |
| 400-pt Breadboard | 1 |
| M-M Wires | 20 |
| 9V Battery Snap | 1 |
Who This Kit Is For
Makers and students will feel right at home. CBSE learners tackling environmental monitoring assignments, ATL Tinkering Lab explorers, and even B.Tech ECE first‑years tinkering with data logging will find this project engaging. Build a real scientific instrument and turn a garden into a living lab.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code inside the box to start a chat with the AI companion that knows every wire and line of code for this kit. If something still doesn’t click, reply on WhatsApp for human help.
Can I change how often it logs data?
Yes, the Arduino sketch is fully open. A single line in the code sets the log interval — change it from 15 minutes to any value that fits your project, then re-upload.
How do I get the recorded data onto my computer?
Plug the Arduino into a USB port, open the Serial Monitor in the Arduino IDE, and send a command. The kit outputs all stored readings as comma‑separated values you can copy into Excel or any spreadsheet.
Can the recorder run outdoors on battery alone?
After you upload the code, disconnect the USB and snap on a 9V battery. The logger will run entirely on battery, stamping data with the real‑time clock, until you retrieve it later for download.
DHT22 + LDR log temperature, humidity and light every 15 min to EEPROM. Download via serial.
What's in this kit
- Arduino Uno R3
- DHT22
- LDR
- DS3231 RTC
- 10kΩ Resistors x10
- 400-pt Breadboard
- M-M Wires x20
- 9V Battery Snap
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items