Greenhouse Climate Monitor Pro Kit with Arduino Uno + DHT22
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Greenhouse Heat Index Display Kit: Arduino Uno, DHT22, LCD — a beginner-level kit.
Greenhouse Heat Index Display Kit: Arduino Uno, DHT22, LCD
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A greenhouse heat index display: a DHT22 measures temperature and humidity, and an Arduino Uno calculates the heat index from them and shows all three on a 16x2 LCD, an introduction to calculating new values from sensor data.
What's in the box
- Arduino Uno R3
- DHT22 Sensor
- 16x2 LCD
- I2C Backpack
- 10kΩ Resistors × 5
- 400-pt Breadboard
- M-M Wires × 20
- 9V Battery Snap
Power: 9V battery, not included.
Skill level: Beginner (2-3 hours, no soldering).
Frequently asked questions
What is heat index?
How hot it feels when humidity is added to temperature.
What's a derived value?
A number you calculate from readings, rather than measure directly.
Imagine walking into your greenhouse not just to check on your plants, but to see a live heat index number on an LCD, calculated in real time from temperature and humidity. This kit teaches you how to wire a DHT22 sensor to an Arduino Uno, read environmental data, and transform it into a practical health warning for plants. It’s a perfect introduction to derived calculations in electronics, blending coding, sensor science, and real-world agriculture.
What You'll Build
A compact climate monitoring station that reads temperature and humidity, computes the heat index (how hot it really feels), and presents the value clearly on a 16x2 LCD. You’ll create a functional device that could be deployed in a small greenhouse to help prevent heat stress in plants. The project gives you a tangible outcome: a display that updates every few seconds, showing actual conditions.
What You'll Learn
- How to interface an Arduino Uno with the DHT22 digital temperature-humidity sensor
- Reading sensor libraries and extracting accurate data for temperature and humidity
- Computing the heat index formula (a derived calculation) from raw temperature and humidity values
- Displaying live data on a 16x2 LCD using the I2C backpack for simplified wiring
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | x1 |
| DHT22 Sensor | x1 |
| 16x2 LCD | x1 |
| I2C Backpack | x1 |
| 10kΩ Resistors | x5 |
| 400-pt Breadboard | x1 |
| M-M Wires | x20 |
| 9V Battery Snap | x1 |
Who This Kit Is For
Ideal for CBSE students working on science fair projects, ATL Tinkering Lab innovators, B.Tech ECE/EEE first-year students learning sensors, and makers exploring Arduino. Also a good first electronics project at home. Anyone curious about how simple components can create a meaningful environmental monitor will find this kit rewarding.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the box QR code to launch the AI companion, which walks through each step with images and code. You can also message us on WhatsApp for human help.
Do I need to know coding to calculate the heat index?
Not beforehand. The companion provides the full Arduino sketch with the heat index formula implemented, thoroughly commented so you can understand and modify it.
Can this kit be used outdoors in a real greenhouse?
The DHT22 works well indoors and in protected outdoor environments, but for continuous greenhouse deployment we recommend enclosing the electronics in a waterproof case (not included).
Greenhouse — DHT22 measures temperature and humidity to calculate and display heat index on LCD. Intro to derived calculations.
What's in this kit
- Arduino Uno R3
- DHT22 Sensor
- 16x2 LCD
- I2C Backpack
- 10kΩ Resistors x5
- 400-pt Breadboard
- M-M Wires x20
- 9V Battery Snap
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items