Home › Garden IR Beam Intruder Alarm Kit: Uno, IR LED, Photodiode
Hydroponics pH Monitor Kit with Arduino Uno + LED - Compoden
In Stock

Garden IR Beam Intruder Alarm Kit: Uno, IR LED, Photodiode

SKU: CDN-KIT-3053-CL Brand: Compoden Category: Electronics > Security & Surveillance > Project Kits
Rs. 600.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 90230090
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

Garden IR Beam Intruder Alarm Kit: Uno, IR LED, Photodiode — a beginner-level kit.

Garden IR Beam Intruder Alarm Kit: Uno, IR LED, Photodiode

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Beginner Build Time: 2-3 hrs Skill: Working with IR emitter/receiver pairs

Kit at a glance

What you build: A garden IR beam alarm: an infrared LED shines across a path to a photodiode, an LM358 cleans up the signal, and when someone breaks the beam an Arduino Uno sounds the buzzer and flashes red LEDs.

What's in the box

  • Arduino Uno R3
  • IR LED 940nm × 2
  • IR Photodiode × 2
  • Active Buzzer
  • 5mm Red LED × 3
  • LM358 Op-Amp
  • 10kΩ Resistors × 10
  • 1kΩ Resistors × 5
  • 220Ω Resistors × 5
  • 400-pt Breadboard
  • M-M Wires × 20
  • 9V Battery Snap

Power: 9V battery, not included.

Skill level: Intermediate (3-4 hours).

Frequently asked questions

Why infrared?

It's invisible, so the beam isn't obvious.

Does sunlight affect it?

Strong sun can; shade the photodiode.

No hydroponics grower wants uninvited guests near their plants. This kit shows you how to build a clever security system using an invisible infrared beam — the same technology found in garage door sensors and motion detectors. With an Arduino Uno and a handful of components, you create a beam barrier that triggers a loud buzzer and flashing red LEDs the moment someone walks through. It’s a practical first project that blends physics, coding, and real-world problem solving.

What You'll Build

A fully functioning infrared intrusion alarm. Place one IR LED and photodiode on opposite sides of your hydroponic setup, power up the circuit, and get instant alerts when the beam is broken. The kit includes two emitter-receiver pairs, so you can protect two separate zones or create a double‑barrier setup for extra coverage.

What You'll Learn

  • How IR emitters and photodiodes work together to create a light‑beam barrier
  • Using an LM358 op‑amp to condition weak photodiode signals for the Arduino
  • Reading digital inputs and controlling outputs (buzzer, LEDs) with Arduino code
  • Prototyping on a breadboard and laying out reliable sensor circuits

Kit Contents

Component Quantity
Arduino Uno R3 1
IR LED 940nm 2
IR Photodiode 2
Active Buzzer 1
5mm Red LED 3
LM358 Op-Amp 1
10kΩ Resistors 10
1kΩ Resistors 5
220Ω Resistors 5
400-pt Breadboard 1
M-M Wires 20
9V Battery Snap 1

Who This Kit Is For

A good starting point for makers, CBSE students and ATL Tinkering Lab participants who want to build their first sensor-based indicator. B.Tech ECE/EEE freshers will appreciate the hands‑on introduction to op‑amp signal conditioning. Even hydroponics hobbyists with no electronics background can follow along — the AI companion removes all guesswork.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

What if I get stuck during the build?

Scan the QR code inside your box to open the AI companion. It walks you through each connection and code line. You can also message us on WhatsApp for direct help.

Can I use this alarm outside my hydroponics tent?

Absolutely. Place the IR beam across a doorway, a window, or even a hallway. The circuit works anywhere you need a simple, invisible intruder alert.

Is this kit suitable for a first-time builder with no coding experience?

Yes. The Arduino code is pre-written and explained in plain language. You’ll load it onto the board in minutes and still learn what each line does.

What if I want to add more sensors later?

The breadboard and extra resistors let you expand easily. Many builders add a second LED‑photodiode pair to a different Arduino pin for a dual‑zone alarm.

Hydroponics — IR LED and photodiode beam — break it and buzzer fires. Intro to IR emitter/receiver pairs.

What's in this kit

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →

How to set up your kit

See all how-to videos →