Sport Form Coach Kit: Self-Balancing Robot with MPU6050 & Arduino Mega 2560
Sport Form Coach Kit with Arduino Mega 2560 - Self-Balancing Mobile Platform for Sports Motion Tracking
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-5 days.
You'll assemble a rugged 4WD rover with an active two-axis platform that stays perfectly level while the chassis tackles bumps, ramps, and sloped outdoor terrain. The built-in gimbal-like stabilisation lets you mount a camera or analysis payload to capture smooth, shake-free footage of athletes in motion - ideal for coaching feedback, biomechanics studies, or sports tech prototyping.
What You'll Build
By the end of this build, you'll have a fully soldered, Arduino-powered mobile robot that uses the MPU6050 IMU to continuously correct the tilt angle of its payload platform. Drive it across uneven ground and watch the servos counteract roll and pitch in real time, keeping a mounted phone or small camera always aligned with the horizon.
What You'll Learn
- Fusing gyroscope and accelerometer data from the MPU6050 to compute stable real-world angles
- Implementing a PID control loop on two servo axes for active vibration and tilt rejection
- Controlling four DC motors with dual L298N drivers for omni-speed 4WD navigation
- Power system design with 18650 lithium cells, buck regulation, and noise filtering for mixed-signal loads
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Mega 2560 | 1 |
| MPU6050 | 1 |
| L298N Driver | 2 |
| TT Gear Motor | 4 |
| SG90 Servo | 2 |
| 18650 Cell | 3 |
| 18650 Holder | 1 |
| LM2596 Buck Converter | 1 |
| 100nF Caps | 10 |
| PCB Prototype Board | 2 |
| 4WD Chassis | 1 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Why Buy This Kit Instead of Sourcing Parts Separately
| Factor | Sourcing Separately | Compoden Kit |
|---|---|---|
| Compatibility checks | You verify every part | Pre-tested as a system |
| Build support | Forums and scattered tutorials | AI companion trained on this exact project |
| Time to first working build | Days of debugging | Hours, with step-by-step guidance |
| Shipping coordination | Multiple sellers, multiple delays | One shipment from Bengaluru in 3-5 days |
Who This Kit Is For
Engineering students pursuing B.Tech in ECE or EEE will find this kit an impressive final-year project or a standout entry for Smart India Hackathon. It's also perfect for robotics club members at IITs, NITs, VIT, or BITS Pilani who want to dive into sensor fusion and autonomous stabilisation. If you're a maker building sports tech prototypes for motion replay or athlete training analysis, this kit delivers a real-world solution straight out of the box.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project - accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code to activate the AI companion, which walks you through each soldering joint and calibration step. If you still need help, message us on WhatsApp and our engineers will guide you.
Can this robot record smooth sports videos on rough ground?
Yes. The two-axis stabilisation keeps the payload platform level while the chassis absorbs bumps, making it excellent for capturing football drills, cricket run-ups, or track events without shaky footage.
Do I need prior experience with PID control to complete this kit?
No. The AI companion and documentation explain PID logic step by step, and you'll tune the gains experimentally with real-time feedback from the servo movements.
Is the soldering iron included safe for a first-time user?
It is the same quality tool used in training labs. The companion shows you proper grip, temperature settings, and solder flow, so you'll learn safely while assembling the power board circuits.
Sports - MPU6050 two-axis balance keeps a payload platform level while the robot drives on uneven terrain.
What's in this kit
- Arduino Mega 2560
- MPU6050
- L298N Driver x2
- TT Gear Motor x4
- SG90 Servo x2
- 18650 Cell x3
- 18650 Holder
- LM2596 Buck Converter
- 100nF Caps x10
- PCB Prototype Board x2
- 4WD Chassis
- Soldering Iron
- Solder Wire
Choose your assembly option:
- Soldering Kit - 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo - 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Shipping Information
- Prepaid Orders: ₹75 for orders up to ₹999, FREE shipping above ₹999
- COD Orders: ₹125 shipping + ₹50 COD fee = ₹175 total
- Delivery Timeline: Dispatch in 1-2 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items