Home › 4x AA Battery Holder with Wire Leads - Compoden
4x AA Battery Holder with Wire Leads - Compoden - Compoden
In Stock

4x AA Battery Holder with Wire Leads - Compoden

SKU: CDN-0887 Brand: Compoden Category: Power
Rs. 60.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 85076000
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

4x AA Battery Holder with Wire Leads

This compact battery holder holds 4 AA batteries in series, providing a steady 6V DC output for your electronics projects. Perfect for Arduino, Raspberry Pi, and other microcontroller circuits that need portable power. The built-in slide switch allows easy on/off control without unplugging.

Key Specifications

Specification Value
Battery Type AA (1.5V each)
Number of Cells 4
Output Voltage ~6V (4 × 1.5V)
Output Connector Bare wire leads, approx. 15 cm
Material Durable ABS plastic
On/Off Switch Yes (slide switch)

What You Can Build With This

Compatibility

Works with Arduino Uno, Nano, Mega, and ESP8266 boards through a 5 V regulator or boost converter (see Wiring Notes). For Raspberry Pi, use with a step-down regulator to 5V. Note that alkaline AA voltage drops under load; rechargeable NiMH cells output 4.8V, which may cause instability on some 5V logic boards.

Wiring Notes

Red wire is positive (+), black is negative (−). Four AA cells (about 6 V, less under load) are too low for the Uno VIN/barrel jack and too high for the 5V pin; use 6 AA cells (9 V) on VIN, or a 5 V regulator/boost converter into the 5V pin. Ensure batteries are inserted with correct polarity, matching the markings inside the holder. Current rating is typically sufficient for small to medium projects (up to 500 mA).

Is this compatible with Arduino?

Not directly. Four AA cells (about 6 V, less under load) are too low for the Uno VIN/barrel jack (7-12V recommended) and too high for the 5V pin; use 6 AA cells (9 V) on VIN, or a 5 V regulator/boost converter into the 5V pin.

Can I use rechargeable AA batteries?

Yes, NiMH AA batteries work, but note the total voltage will be 4.8V (4 × 1.2V) which may cause instability on 5V logic boards. Some Arduinos may brown out when batteries discharge below 4.5V.

What is the wire length?

The attached wires are approximately 15 cm long, giving you plenty of reach inside an enclosure.

Free Setup Handoff Document Included

Every Compoden order includes a free setup handoff document — step-by-step instructions to get your component working within minutes. Download it via QR code on your package. The handoff document is also trained to help you troubleshoot the majority of problems.

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →