Weather Station Kit with Arduino Uno + Sensors
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Weather Station Kit with Arduino Uno + Sensors — an intermediate-level kit.
Arduino Weather Station Kit: Display Temperature, Humidity & Pressure with Trend Arrows on OLED
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Kit at a glance
What you build: A desk weather station: a DHT22 and BMP280 read temperature, humidity and air pressure, and an Arduino Uno shows them on a 0.96-inch OLED. Arrows show whether pressure is rising or falling. Two buttons switch views, and a buzzer can warn on a big pressure drop.
What's in the box
- Arduino Uno R3
- DHT22
- BMP280
- 0.96in OLED
- Active Buzzer
- Tactile Button × 2
- 4.7kΩ Resistors × 5
- 10kΩ Resistors × 5
- 100nF Caps × 5
- 400-pt Breadboard
- M-M Wires × 25
- 9V Battery Snap
Power: 9V battery, not included.
Skill level: Intermediate (3-4 hours, no soldering).
Frequently asked questions
What does falling pressure mean?
It often comes before wet or stormy weather, while rising pressure usually means settling weather.
Can it log readings?
No. There's no SD card. It shows live values and trends.
Do I need to solder?
No.
Transform a handful of components into a fully functional weather station that goes beyond simple numbers. This kit lets you measure ambient temperature, relative humidity, and barometric pressure, then displays them on a crisp OLED screen along with dynamic up/down trend arrows. Whether you're preparing for a CBSE electronics project, a Smart India Hackathon prototype, or just satisfying your curiosity about the microclimate around you, this intermediate build gives you real meteorological insight.
What You'll Build
You'll assemble a self-contained monitoring station that reads DHT22 and BMP280 sensor data, processes it through an Arduino Uno, and outputs current readings with trend indicators on a 0.96‑inch OLED. The active buzzer alerts you to threshold breaches, while two tactile buttons let you cycle through display modes or reset statistics. At the end, you have a portable weather dashboard you can place on a desk or mount outdoors in a shaded enclosure.
What You'll Learn
- Interface DHT22 and BMP280 sensors with Arduino using I2C and one‑wire protocols
- Compute rolling averages to generate trend arrows for temperature, humidity, and pressure
- Drive an SSD1306 OLED display with graphical symbols and real‑time text
- Integrate user input with tactile buttons to switch parameters or dismiss alarms
Kit Contents
| Component | Quantity |
|---|---|
| Arduino Uno R3 | 1 |
| DHT22 | 1 |
| BMP280 | 1 |
| 0.96in OLED | 1 |
| Active Buzzer | 1 |
| Tactile Button | 2 |
| 4.7kΩ Resistors | 5 |
| 10kΩ Resistors | 5 |
| 100nF Caps | 5 |
| 400-pt Breadboard | 1 |
| M-M Wires | 25 |
| 9V Battery Snap | 1 |
Who This Kit Is For
If you're a CBSE student preparing a functional science exhibit, a B.Tech ECE or EEE undergrad at an Indian university exploring IoT, or a participant in the Smart India Hackathon, this kit bridges theory and practice. ATL Tinkering Lab mentors and hobbyists from colleges like VIT, NIT, or BITS will also find it an ideal weekend build with real environmental data to collect and analyze.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
The AI companion walks you through each step with circuit photos and code snippets. If you still need a human, our team responds on WhatsApp within the hour.
Can I log the weather data to an SD card or the cloud?
The core kit focuses on visual display, but the Arduino Uno has room for expansion. You can add an SD card module or ESP8266 Wi‑Fi board later, and the AI companion will point you to compatible pinouts.
Will the sensors work accurately in Indian heat and humidity?
Yes, the DHT22 and BMP280 are rated for 0–100% humidity and -40 to 85°C, well within Indian climate extremes. The OLED is clear even in bright indoor light.
What if I need to use this for a CBSE or college submission?
The kit includes block diagrams, connection schematics, and commented Arduino code that you can cite directly in your report. The AI companion also helps explain the working principle for viva sessions.
DHT22 + BMP280 display temperature, humidity and pressure on OLED with trend arrows.
What's in this kit
- Arduino Uno R3
- DHT22
- BMP280
- 0.96in OLED
- Active Buzzer
- Tactile Button x2
- 4.7kΩ Resistors x5
- 10kΩ Resistors x5
- 100nF Caps x5
- 400-pt Breadboard
- M-M Wires x25
- 9V Battery Snap
Do you deliver across India?
Yes. We ship Weather Station Kit with Arduino Uno + Sensors across India including Delhi, Mumbai, Bangalore, Hyderabad, Chennai, and Pune. Orders ship in 3-7 days.
What payment options are available for Weather Station Kit with Arduino Uno + Sensors?
We accept UPI, all major debit and credit cards, and Cash on Delivery (COD) available.
Built and shipped from Compoden, with UPI and cards, plus COD available.
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items