Auto Light Energy Saver Kit v4
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Auto Light Energy Saver Kit v4 — a beginner-level kit.
Build an Automatic Energy-Saving Light with Gas Leak Telegram Alerts – Pico W Kit
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Create a compact automatic light controller that cuts wasted electricity by turning lights on only when someone is present. Add a safety layer with a gas sensor that sends instant Telegram alerts to your phone while you’re away — all powered by the tiny Raspberry Pi Pico W.
What You'll Build
You'll assemble a complete smart energy-saving system inside the included ABS enclosure. When the PIR sensor detects motion, the light switches on; when the room is empty, it turns off. Meanwhile, the MQ-2 gas sensor continuously monitors for leaks. If a dangerous level is detected, the active buzzer sounds a local alarm and the Pico W instantly pushes a Telegram message to your mobile — so you’re always aware, even when you’re not at home.
What You'll Learn
- Connect PIR and gas sensors to a Raspberry Pi Pico W and read their output signals
- Write MicroPython code to control outputs and implement energy-saving logic
- Configure a Telegram bot and send real-time notifications from your device
- Design a compact, low-power IoT device for real-world home automation
Kit Contents
| Component | Quantity |
|---|---|
| Raspberry Pi Pico W | 1 |
| HC-SR501 PIR | 1 |
| LDR | 1 |
| 5V relay module | 1 |
| Resistor kit | 1 |
| USB micro cable | 1 |
| Breadboard (830 + 400) | 1 |
| Jumper wires (20) | 1 |
Who This Kit Is For
This kit is designed for makers in India, students exploring ATL Tinkering Lab projects to students preparing CBSE science exhibitions. It’s perfect for school STEM clubs, first-time IoT hobbyists, and anyone seeking a safe, guided introduction to Raspberry Pi Pico W and home automation.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the QR code on the box to launch the AI companion, which gives step-by-step help; you can also reach us on WhatsApp for direct support.
Does this kit require soldering?
No, all connections use jumper wires and breadboard-friendly components — no soldering needed.
Can I run it on a battery?
Yes, the Pico W can be powered from any USB power bank. The code is written to keep power consumption low for energy-saving operation.
How hard is it to set up Telegram notifications?
The AI companion walks you through creating a bot in about 10 minutes, and the provided code handles the rest.
Energy Saving — Pico W reads PIR and gas sensor. Sends Telegram notification if alarm triggers while away from home.
What's in this kit
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items