Home › Greenhouse Climate Monitor Kit with ESP32 + Sensor
Greenhouse Climate Monitor Kit with ESP32 + Sensor - Compoden
In Stock

Greenhouse Climate Monitor Kit with ESP32 + Sensor

SKU: CDN-KIT-3309 Brand: Compoden Category: Electronics > AI & Advanced Boards > Project Kits
Rs. 2,110.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 90230090
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

Greenhouse Air Anomaly Detector Kit: ESP32-S3, MQ-135, DHT22 — a beginner-level kit.

Greenhouse Air Anomaly Detector Kit: ESP32-S3, MQ-135, DHT22

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Beginner Build Time: 2-3 hrs Skill: Environmental sensing and anomaly alert systems

Kit at a glance

What you build: A greenhouse air anomaly detector: an MQ-135 and a DHT22 feed an ESP32-S3 that keeps a rolling average of normal greenhouse air and flags sudden changes, such as fumes from a heater or a humidity spike, with a red LED and a label on the OLED.

What's in the box

  • ESP32-S3 Dev Board
  • MQ-135 Gas Sensor
  • DHT22
  • 0.96in OLED
  • 5mm Red LED × 2
  • 4.7kΩ Resistors × 5
  • 10kΩ Resistors × 5
  • 100nF Caps × 5
  • 400-pt Breadboard
  • M-M Wires × 20
  • USB-C Cable

Power: USB-C. A USB charger is not included.

Skill level: Beginner (3-4 hours, no soldering).

Frequently asked questions

What is a rolling average?

The average of recent readings, so slow daily changes aren't flagged.

Is it a gas alarm?

No. It flags unusual readings for you to check.

Your greenhouse climate can shift in minutes, but most growers only notice when leaves curl or condensation forms. This kit turns an ESP32-S3 into a watchful guard that constantly compares temperature, humidity, and air quality against a rolling baseline. The moment the mean drifts beyond a safe window, a red LED fires and the OLED spells out exactly what triggered the alert.

What You'll Build

You will assemble a standalone monitoring node that reads DHT22 (temperature/humidity) and MQ-135 (ammonia/CO2 proxy) every second, stores a rolling history, and computes mean values. When a new reading deviates by more than a configurable threshold, a red LED blinks and the OLED displays the sensor type and deviation magnitude. It’s a real-time anomaly detector, not just a data logger.

What You'll Learn

  • Interface DHT22 and MQ-135 with an ESP32-S3 on a breadboard
  • Implement a rolling mean algorithm in Arduino C++ for sensor data streams
  • Program a 0.96-inch OLED display using I2C to show event labels
  • Use resistors and capacitors to condition analog sensor signals

Kit Contents

Component Quantity
ESP32-S3 Dev Board 1
MQ-135 Gas Sensor 1
DHT22 1
0.96in OLED 1
5mm Red LED 2
4.7kΩ Resistors 5
10kΩ Resistors 5
100nF Caps 5
400-pt Breadboard 1
M-M Wires 20
USB-C Cable 1

Who This Kit Is For

If you are a CBSE student building a science exhibition model, a first-year B.Tech ECE/EEE learner exploring embedded systems, or an ATL Tinkering Lab mentor running a sensor integration workshop, this kit matches your need. The anomaly detection logic directly aligns with Smart India Hackathon themes around agriculture and environmental monitoring, while the beginner-friendly breadboard build eases you into real-world IoT.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.

What if I get stuck during the build?

Scan the QR code to talk to the AI companion that has the exact circuit diagram and code walkthrough; you can also message us on WhatsApp for human help.

Can I adjust the anomaly threshold for my greenhouse?

Yes, the code includes clearly marked variables for temperature, humidity, and gas deviation limits. Change them in seconds with your laptop.

Will this work without a Wi-Fi connection?

Absolutely. The anomaly detection runs entirely on the ESP32-S3; Wi-Fi is only needed if you later choose to add remote logging.

Is it suitable for a practical lab exam like CBSE CS/ECE?

Yes, the project demonstrates sensor interfacing, analog reading, and algorithm design — all common in CBSE practicals and university lab records.

Greenhouse — MQ-135 + DHT22 feed a rolling mean anomaly detector on ESP32-S3. LED flashes and OLED labels event type.

What's in this kit

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →

How to set up your kit

See all how-to videos →