Home › MQ-2 Smoke and Gas Sensor Starter Kit with Arduino Uno + Sensor
MQ-2 Smoke and Gas Sensor Starter Kit with Arduino Uno + Sensor - Compoden
In Stock

MQ-2 Smoke and Gas Sensor Starter Kit with Arduino Uno + Sensor

SKU: CDN-KIT-1107-CL Brand: Compoden Category: Electronics > Sensor Starter Kits > Project Kits
Rs. 1,008.00
Inclusive of all taxes
Free Shipping on prepaid orders above ₹1,999
Ships in 3-7 days
7-Day Warranty on manufacturing defects
GST invoice 18% GST included · HSN 90230090
Pay with UPI Cards Netbanking Cash on Delivery
Need 10+ units? Contact us for bulk pricing
100% Genuine Products
Expert Technical Support
Quality Tested
Soldr.ai Ask about this product

Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts

MQ-2 Smoke and Gas Sensor Starter Kit with Arduino Uno + Sensor — a beginner-level kit.

MQ-2 Smoke & Gas Sensor Starter Kit with Arduino Uno — Read Gas Levels on an LCD

Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.

Difficulty: Beginner Build Time: 2-3 hrs Skill: Sensor Interfacing and Alert Systems

Build a device that shows the MQ-2 gas reading on an LCD and flashes a red LED and buzzer above your threshold. It is a learning prototype, not a certified safety device; fit a certified gas alarm. With this kit, you'll assemble exactly that — a real-time air quality monitor that could one day prevent a disaster. No prior electronics experience needed; just curiosity and a few hours.

What You'll Build

You'll build a gas sensing project that responds to LPG, smoke and combustible vapours, turning on the buzzer and LED when the reading passes your threshold. The 16x2 LCD displays the live sensor reading in parts per million (PPM), so you can see exactly how polluted the air is. It's a working prototype of the kind of system used in homes, hotels, and factories across India.

What You'll Learn

  • How to interface an MQ-2 analog sensor with Arduino and read gas concentrations.
  • Programming conditional logic to trigger alerts when danger levels are detected.
  • Displaying real-time sensor data on an I2C LCD.
  • Building a complete electronic circuit on a breadboard without soldering.

Kit Contents

Component Quantity
Arduino Uno R3 x1
MQ-2 Gas Sensor x1
16x2 LCD x1
I2C Backpack x1
Active Buzzer x1
5mm Red LED x3
220Ω Resistors x5
10kΩ Resistors x5
400-pt Breadboard x1
M-M Wires x20
9V Battery Snap x1

Who This Kit Is For

This kit suits school science projects on gas sensing, ATL Tinkering Labs, and hobbyists learning how gas sensors respond. B.Tech ECE students also use it to demonstrate analog sensor interfacing.

Built and Backed by Compoden

Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We

MQ-2 detects LPG, smoke and combustible gases. LED and buzzer alert with live PPM on LCD.

What's in this kit

Shipping Information

  • Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
  • COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
  • Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location

Returns & Warranty

  • 7-Day Return: Manufacturing defects only (approval required)
  • Warranty: 7 days from delivery
  • Non-Returnable: Batteries, consumables, cut wires, clearance items

View complete shipping policy →

View complete returns policy →

How to set up your kit

See all how-to videos →