Pi Pico UV Index Wearable
Open this project in the Soldr app → What is Soldr.ai → wiring, code and test steps for exactly these parts
Pi Pico UV Index Wearable — a beginner-level kit.
Pi Pico UV Index Wearable Kit: Build a Sun Safety Tracker That Clips Anywhere
Every part needed, pre-tested for compatibility, with an AI build companion trained on this exact project. Shipped from Bengaluru in 3-7 days.
Sun awareness becomes second nature when you wear your own UV monitor. This kit puts a personal sun safety tracker right on a bag strap, cap, or collar, continuously showing the UV index and counting down safe outdoor time. It’s a practical introduction to sensing, microcontrollers, and battery-powered wearables built on the Raspberry Pi Pico.
What You'll Build
A compact, rechargeable device that reads ultraviolet intensity through the ML8511 sensor, displays the UV index and remaining exposure limit on a bright OLED screen, and fits inside a custom ABS enclosure. Clip it on before heading out, and the Pico Wearable keeps you informed whether you're at a school sports meet, a weekend trek, or simply playing in the park.
What You'll Learn
- How to read an analog UV sensor with the Raspberry Pi Pico’s ADC
- Driving an I2C OLED display to show sensor readings and computed limits
- Battery power management with the TP4056 charging module and a LiPo cell
- Basic soldering and enclosure assembly to create a durable wearable
Kit Contents
| Component | Quantity |
|---|---|
| Raspberry Pi Pico | 1 |
| ML8511 UV Sensor | 1 |
| 0.96in OLED | 1 |
| 3.7V LiPo 500mAh | 1 |
| TP4056 Module | 1 |
| 10kΩ Resistors | 5 |
| PCB Prototype Board | 2 |
| ABS Enclosure Box | 1 |
| Soldering Iron | 1 |
| Solder Wire | 1 |
Who This Kit Is For
CBSE students working on sensor investigatory projects, B.Tech ECE/EEE undergraduates prototyping a wearable, or ATL Tinkering Lab mentors looking for a UV-sensing activity. Even parents searching for a weekend STEM project will find clear guidance. This kit also fits neatly into a Smart India Hackathon wearable concept or an IoT health gadget demo.
Built and Backed by Compoden
Every Compoden kit ships with an AI build companion trained on this exact project — accessible via a QR code on the box, with WhatsApp and email backup. We've spent 10 years building projects for makers, schools, and institutions across India. If a part fails because of a manufacturing defect, replace it free within 7 days.
What if I get stuck during the build?
Scan the box QR code for the AI build companion, which walks through each step. If you need a human, message us on WhatsApp—real engineers reply within a day.
How long does the battery last?
The 500mAh cell powers continuous UV monitoring for about 4–5 hours. Recharge via the TP4056 module’s micro USB port.
Do I need prior soldering experience?
Not at all. The included guide shows every joint, and the AI companion highlights exactly where to solder. Beginners pick it up quickly; younger builders just need an adult nearby.
ML8511 UV sensor on Pi Pico in a small 3D printed clip. OLED shows UV index and sun exposure limit.
What's in this kit
Choose your assembly option:
- Soldering Kit — 25W soldering iron, 60/40 solder wire, flux, and small perfboard for permanent assembly.
- Breadboard Combo — 800-point full-size breadboard with 65-piece jumper wire pack for solderless prototyping.
Other projects you can build
Shipping Information
- Prepaid Orders: ₹45 for orders up to ₹1,999, FREE shipping above ₹1,999
- COD Orders: ₹45 shipping for orders up to ₹1,999, FREE shipping above ₹1,999. COD available.
- Delivery Timeline: Dispatch in 3-7 days, delivery in 2-7 days depending on location
Returns & Warranty
- 7-Day Return: Manufacturing defects only (approval required)
- Warranty: 7 days from delivery
- Non-Returnable: Batteries, consumables, cut wires, clearance items